The Largest Selection   

      ANTENNAS

     AMPLIFIER

      RECEIVERS

      TRANSMITTERS

      FEEDHORN

       LNB's

       NETWORK

Types HUB6504 4IF HUB MODULE. Hosting up-to 4 satellite networks in a single rack, HUB6504 is the solution for satellite service providers. The Series 15100 is an ideal satellite hub for service providers operating multiple high performance IP broadband networks-Wikipedia The hub combines functionality and flexibility into a scalable solution, enabling network operators and service providers to operate from a single location the highest quality networks. HUB6000 is the next generation satellite hub. Universal Satellite Hub (5IF/20 Slot)-Wikipedia The 15100 is iDirect's largest, most flexible satellite hub.

Satellite Hub and Controller - iDirect Hub Hughes Exede WildBlue-Wikipedia

UNIVERSAL  Antenna Rotator Control Unit with 69 Presets

Description: This Channel Master antenna rotator control unit replaces any manual rotator controller that uses 18volts AC. The product is compatible with 9521A, 9500, 9510, 9510A, 9512, 9513, 9515, 9515A rotator systems, and most others. Comes with a remote control and is also compatible with most universal remote controls over the auxiliary input.

• 69 preset locations (0-69) allow location numbers to be the same as TV channel numbers if desired
• Holds memory during power failures
• Automatic synchronization ensures pinpoint accuracy
• Can manually turn antenna 360 degrees or use up to 69 preset location settings

CM9537 Data Sheet

iDirect Evolution eM1D1 & eM1D1-FIPSL2 Hub Line Card

Description: The iDirect Evolution Series eM1D1 line card is suited for supporting secure voice, data, and video communication links for mission-critical military and COTM broadband applications operating in either DVB-S2/ACM or iNFINITI TDM mode on the outbound. The eM1D1 line card supports TDMA or SCPC Return* with optional Spread Spectrum and extremely efficient FEC with 2D 16-State coding on the inbound. The line card features one modulator and one demodulator and is designed to meet the guidelines of MIL-STD 810F for operation in harsh environments.

EM1D1-FIPSL2 Data Sheet

Romantis UHP-8000 Hubless TDMA Dual VSAT Satellite Router

Description: The highly advanced Romantis UHP-8000 is a rack-mountable chassis with two integrated UHP-1000 routers, power supplies and IF subsystem. The 8000 series satellite router is a universal component of TDMA satellite networks, regardless of operation mode or topology. Its primary application is in large Hub stations, where multiple UHP routers are cascaded. UHP-8000 dual router is also a good fit for redundancy solutions with hot standby.

UHP-8000 Data Sheet

D-Link

For over 30 years D-Link has been creating complete, end-to-end networking solutions that deliver just that and more. It all adds up to state-of-the-art solutions that will really work for your business. D-Link’s Switching, Wireless, Network Security, IP Surveillance, Storage and Management Solutions deliver best-in-class performance.

World’s fastest router.

Router - Gateway - Switch-Wikipedia

CISCO Systems

Cisco is the worldwide leader in IT and networking. We help companies of all sizes transform how people connect, communicate, and collaborate. Cisco D9824, Cisco D9850, D9854, D9858, D9859, D9865-Wikipedia  

LINKSYS

Today, Belkin International has three brands – Belkin, Linksys and WeMo – to enhance the technology that connects us to the people, activities and experiences we love. Belkin products are renowned for their simplicity and ease of use, while our Linksys brand helped make wireless connectivity mainstream around the globe. Our newest brand, WeMo, is the leader in delivering customizable smart home experiences. Its product platform empowers people to monitor, measure and manage their electronics, appliances and lighting at home and on-the-go. MANAGED GIGABIT SWITCHES Secure, reliable, powerful switching at Gigabit speeds.

Belkin - LINKSYS - WEMO-Wikipedia

NETGEAR

Move files through your network faster than ever. With 802.11ad, transfer rates are largely comparable with the performance of a direct transfer. 802.11ad has 3X faster transfer rates, resulting in requiring 60 seconds less to transfer a 10 GB file. See what makes the NETGEAR Nighthawk X10 the world’s fastest router.

Router - Gateway - Switch-Wikipedia

General Dynamics-Wikipedia

General Dynamics SATCOM Technologies, a leading supplier of satellite and wireless communications products and services for video, voice and data worldwide. SATCOM Technologies offers an exciting range of new communications products and solutions backed by the same high quality and expertise you've come to rely on.

Prodelin

970 Antenna Control System

Description: Model 970 Control Systems comprises an Antenna Control Unit (ACU), Tracking Receiver Unit (TRU) and a Power Drive Unit (PDU) which are linked via dedicated Ethernet connections. This provides flexibility in locating the key system components, allows for variable separation distances and provides immunity to electrical ground plane transients. The Model 970 Control Systems can be used with almost any full motion antenna for precision satellite, spacecraft, or celestial tracking applications. GEO, LEO, TT&C, RADAR, or Celestial applications

GD970 Data Sheet 

950A Antenna Control System Stable or inclined GEO targets

Description: The GD Satcom 950 Antenna Control System comprises of an Antenna Control Unit (ACU), Tracking Receiver Unit (TRU) and a Power Drive Unit (PDU) which are linked via dedicated Ethernet connections. This provides flexibility in locating the key system components, allows for variable separation distances and provides immunity to electrical ground plane transients. The GD Satcom 950 Antenna Control System is normally better than 5% of the receive beamwidth in winds of 30 mph gusting to 45 mph, satellite inclination of up to 15º and signal scintillation of up to 2 dB.

GD950A Data Sheet 

930A Antenna Control System

Description: Our latest Antenna Control System, the Model 930A, offers economical satellite tracking and control. It is ideally suited for single AC fixed antennas and includes an Antenna Control Unit (ACU), Internal Tracking Receiver (TRU) and a Power Drive Unit (PDU).  The Model 930A is our intended replacement for our long-standing Model 7134 Antenna Controller and is backwards compatible with our reliable Model 7150 Power Drive Units. The 930A is supported 24/7/365 days a year by our technical support team

GD930A Data Sheet 

General Dynamics SATCOM Technologies Model 7134 Antenna Control System

Description: The General Dynamics SATCOM Technologies (GDST) Model 7134 Antenna Control System is a microprocessor-based system incorporating digital technology for accurate antenna positioning with high reliability, maximum flexibility, and a straightforward and practical user interface. This control system is ideally suited for small to medium aperture antenna applications requiring capabilities for automatic multiple satellite access, program track, remote control via an RS-232 or RS-422 communications link, and optionally automatic step track operation and memory track. The standard product provides 2-speed axis control for AZ and EL with a high/low speed ratio of up to 15:1. This is accomplished by application of user-settable high and low-speed control signals to variable speed AC drives, which in turn control standard 3-phase induction motors. For 3-axis systems, circuitry is provided for the control of an AC synchronous stepping polarization motor. The AZ and EL motor controllers employ integral electronic protection. The drive cabinet includes NEMA-rated circuit protection devices for each motor/motor controller, which are sized appropriately for each application.

GD7134 Data Sheet

990 Antenna Control System

Description: Model 990 Control Systems comprises an Antenna Control Unit (ACU), Tracking Receiver Unit (TRU) and a Power Drive Unit (PDU) which are linked via dedicated Ethernet connections. This provides flexibility in locating the key system components, allows for variable separation distances and provides immunity to electrical ground plane transients. The Model 990 Control Systems can be used with almost any full motion antenna for precision satellite, spacecraft, or celestial tracking applications. GEO, LEO, TT&C, RADAR, or Celestial applications.

GD990 Data Sheet 

253/250 Tracking Receiver

Description: The Model 253 and 250 tracking receivers provide a high-quality, cost-effective solution for converting the satellite beacon from RF or IF to a DC voltage tracking signal. The 253 is an integrated, rack-mounted (2RU) receiver chassis. The 250 is a receiver card set integral to the Model 133 ACU chassis, available with an optional block down converter.

GD253 Data Sheet 
GD250 Data Sheet 

500 Tracking Receiver

Description: The Model 500 series of tracking receivers provides a high quality, cost effective solution as a beacon receiver for satellite tracking, spectrum display, and uplink power control (UPC) receiver source. Configurable for tracking receiver, spectrum display or uplink power control Inputs for 950-2150 MHz L-Band, single or multiband with converters for S/C/X/Ku/Ka Single or dual polarization inputs •Acquire C/No 35 dB-Hz Digital, 40 dB-Hz Analog Ethernet Connectivity Dynamic range > 90 dB Monopulse capability (with optional RF plate) •Quick-Lock acquisition (<1 second)

GD500 Data Sheet 

DTR Digital Tracking Receiver

Description: The General Dynamics SATCOM Technologies Digital Tracking Receiver (DTR) is a fully synthesized tracking receiver developed for satellite tracking and uplink power control applications. This DSP-based receiver accepts wideband RF inputs, performs frequency selection, and digitally processes the selected signal The DTR can be configured for numerous input frequency ranges from L-band to Ka-band. Multi-band applications are also readily accommodated. DDS techniques facilitate 1 kHz frequency resolution for any input frequency range. The use of DSP technology, rather than conventional analog radio techniques, provides outstanding linearity and operational flexibility. Software controlled signal detection can accommodate virtually any modulation scheme.

GDDTR Data Sheet 

Total System Management

Description: The NetMAC (Network Monitor and Control) System is the complete management tool for your telecommunications system, from a single site to a full array of network functions. The NetMAC provides cost effective and powerful central control of your total operations, giving you the competitive edge. The NetMAC has been optimized for the management of communication systems at either a single site or a network having multiple remote locations. Whether these locations communicate with a single hub, multiple hubs, or exist in a hubless mesh network, the NetMAC can work within the existing topology and easily expanded to meet your future growth plans.

NetMAC Data Sheet 

Additional Antenna Control Systems

Description: General Dynamics SATCOM Technologies, a leading supplier of satellite and wireless communications products and services for video, voice and data worldwide. SATCOM Technologies offers an exciting range of new communications products and solutions

980 Antenna Control Data Sheet
123T-1 Antenna Control Data Sheet
7134 Antenna Control Data Sheet
7200 Antenna Control Data Sheet

133 Antenna Control Data Sheet
7031B Jog Controller Data Sheet
7133B Antenna Controller Data Sheet
TR70-1A Tracking Receiver Data Sheet
TRL-1S Tracking Receiver Data Sheet

ORBIT

ORBIT is a leading global provider of technology based Mission Critical integrated communication solutions. We develop, integrate and install end-to-end turnkey communication solutions and services for air, sea, land and space applications. Based on a customer-centric approach, we offer integrated turnkey solutions for defense, government and commercial organizations. 

Defense - Government - Commercial-Wikipedia

AL-4000 Indoor Tracking Controller

Description: The AL-4000 Antenna Control Unit (ACU) facilitates the operation and monitoring of tracking systems. It features dual-CPU architecture to ensure real-time response for mission-critical data acquisition, as well as a graphical touch interface that can be easily customized to support a wide range of tracking and telemetry applications. The ACU remotely interfaces over IP which makes it an ideal solution for mission and control centers.

AL-4000 Data Sheet

AL-4100 Outdoor Tracking Controller

Description: The AL-4100 is ORBIT’s advanced outdoor Antenna Control Unit (ACU), designed to facilitate monitoring and control of tracking systems in remote locations. It incorporates built-in features for a wide range of telemetry and satellite tracking applications. A wide variety of operation modes allows for automatic tracking, slave tracking and remote control operation via a host computer. The AL-4100 is designed to withstand extreme environmental conditions in outdoor applications. It is a rigid and hermetically sealed case equipped with a powerful CPU engine capable of performing complex tracking algorithms. The connection with the AL-4100 can be established through the host computer via either an Ethernet or RS 232/422 communication link. By connecting the host computer to the AL-4100, the operator can control and monitor the tracking system.

AL-4100 Data Sheet

ASC Signal

ASC Signal Division fixed earth stations range from 1m up to 9.4m configured in receive-transmit or receive-only mode. They offer outstanding electrical performance and exceptional versatility to support multi-beam configuration, with low-PIM capability for all X-band systems. The company's antennas provide an extremely accurate surface contour resulting in exceptionally high gain and closely-controlled pattern characteristics. High-quality manufacturing ensures maximum durability with minimal maintenance.

Satellite Antenna-Wikipedia

WEATHER STATION / SOLAR FLUX Controller & Parts

The NGC Weather Station and Solar Flux are two optional interfaces for the NGC-AESC. The Weather Station provides the following information: Wind speed - Wind direction - Barometric pressure - Station temperature - Humidity - Dew point - The Solar Flux provides the following information: Solar radiation. NGC-SEN Sensor Package is available in two forms; Fixed Antennas, and tactical / Transportable antenna systems. This integration base package includes inclinometers, compass, & GPS. Conveniently packaged in a single environmental package, except for the antenna, the NGC-SEN-## is designed to provide optimal performance in a cost effective, easy to access and mount package. The NGC-SEN-## package is tightly integrated in t the NGC algorithms for seamless and highly integrated operation

NGS-WS100WX Data Sheet
NGC-SLRFLX Data Sheet
NGC-IFL CABLE Data Sheet
NGC-SENSOR PACKAGE Data Sheet

NGC OUTDOOR UNIT (ODU)

Description: The NGC OUTDOOR UNIT (ODU)
The ODU is housed in a NEMA 4X aluminum enclosure and is designed to be mounted directly onto the antenna structure, minimizing the cable length to motors, limit switches and position encoders. Variable Speed motor control for two- and three- axis motor systems complying with the standard ASC Signal interface, using VFDs for driving the Azimuth and Elevation axes. Support for stepper motor type Polarization rotators (optional) utilizing ASC Signal’s proprietary NGC Bus, eliminating the need for the internal transformer and polarization control electronics.

NGC-ODU Data Sheet

ASC Signal NGC Antenna Control System Indoor Unit (IDU)

Description: The NGC Antenna Control System is an advanced level antenna control system intended for applications with demanding tracking requirements, complex geometries, and dynamic conditions. The NGC Antenna Control System offers precise, user-friendly control over the basic motorization kits for ASC Signal Corporation antennas with sizes 2.4 meters and up. The NGC-IDU features a SmarTrack predictive tracking mode that utilizes a patented Three-Point Peak Algorithm that saves wear on the antenna motors and jacks. The NGC IDU provides convenient features such as straightforward color graphics, LCD touch screen interface, and a number of powerful remote control software protocol options, the NGC Antenna Control System is an ideal solution for medium- to large- sized earth stations requiring complex pointing and tracking functions.

NGC-IDU Data Sheet

NGC BEACON RECEIVER

Description: The NGC-004-02 or NGC-004-02- IDU Beacon Receiver option tracks L band beacons in the 930 to 2300MHz range. This beacon receiver can operate on satellites with modulated or non modulated L Band beacons, with downlink carrier frequency through Ka band with associated external BDC. This beacon receiver is designed to track the power density of a satellite beacon in real time using FPGA DSP. It provides information about the beacon level directly to the NGC tracking system, the IDU version also provides a DC output for controlling an uplink power control system.

NGC-004-02 Data Sheet
NGC-004-02-IDU Data Sheet

RADEUS

Radeus Labs, Inc. designs, manufactures and markets robust computing solutions and SatCom products for a wide variety of applications and environments, from airborne instrumentation to server racks and satellite antenna-control systems for earth stations. Radeus Lab’s high-performance SatCom equipment is designed thoughtfully, putting the user at the forefront of our development process. Our high quality, quick delivery, and expert product support are rapidly turning the 8200 Antenna Control Unit (ACU) into the industry’s go-to unit for limited motion, jack drive applications.

Indoor - Outdoor - Commercial-Wikipedia

Radeus Labs Model 8200 Antenna Control System

Description: This antenna control system meets the requirements of retrofits and new in- stallations. As a retrofit option, the 8200 ACU is compatible with industry standard drive-cabinet interfaces and legacy position-feedback devices such as absolute rotary optical encoders, standard single-speed brushless size 11 resolvers, and two-speed brushless size 20 resolvers. The Radeus Labs Model 8200 Antenna Control Unit is designed to support robust, unattended operation for long periods of time. It uses state-of-the-art technology to deliver higher value than legacy ACUs, along with unprecedented ease of use, reliability, and performance.

RL8200 Data Sheet

Radeus Labs Model 8250 Antenna Control System

Description: Model 8250 Drive Cabinet. The Radeus Labs 8000 Series™ drive cabinet reduces IFL costs. It also requires fewer connections between the control center and the antenna. Remote system control over ethernet via SNMP. Options enable users to monitor and control brakes, interlocks, and feed status, as well as various position-feedback resolution and accuracy options.

RL8250 Data Sheet

Comtech Satellite Controller-Wikipedia

Comtech EF Data Corp. is a leading supplier of satellite bandwidth and link optimization. Our high-performance satellite communications infrastructure solutions feature groundbreaking efficiency, robust intelligence and unparalleled horsepower. Commercial and government users around the world utilize our solution suite to reduce OPEX/CAPEX and to increase throughput for the most demanding fixed and mobile networks

Controller - Positioning - Commercial-Wikipedia

Xicom Technology XTC-115D Digital Controller

Description: Xicom Technology XTC-115D Digital Controller The Comtech Xicom line-up of 1RU digital controllers are designed to complement our line of digital and analog amplifiers by enabling their use in single thread, redundant or phase-combined system configurations. These controllers provide system control and offer local amplifier function controls.

XTC115D Data Sheet

Xicom Technology XTC-116D Digital Controller

Description: The Comtech Xicom line-up of 1RU digital controllers are designed to complement our line of digital and analog amplifiers by enabling their use in single thread, redundant or phase-combined system configurations. These controllers provide system control and offer local amplifier function controls.

XTC116D Data Sheet

Satellite Systems Corporation

Satellite Systems Corporation was founded in 1980. We have 34 years experience in the satellite industry in satellite earth station installation, integration, and equipment manufacturing. Currently, we manufacture beacon receivers, frequency converters, antenna positioning systems, FM analog SCPC Modulators, FM analog SCPC Receivers, Redundant switching systems. We also specialize in custom configurations.

Positioning - Redundant Switching - Beacon Receivers-Wikipedia

Satellite Systems Model ATX-3000 Automatic Inclined Orbit Antenna Tracking Controller

Description: The ATX-3000 antenna tracking controller is a user-friendly microprocessor-based intelligent positioning system to reliably track inclined orbit satellites or for use as a positioner for geosynchronous satellites with memories for up to 99 satellites.

ATX3000 Data Sheet

Satellite Systems Model ATX-3000 Automatic Inclined Orbit Antenna Tracking Controller

Description: ATX-3000 Features Fully programmable positioner with memories for up to 99 satellites. New! SINGLE POINT CALIBRATION for fast set up! New! Peaking and history track algorithms. Tighter peaks, less loss, improved performance New! Full remote control / control your antennas position from anywhere in the world! New! Foul weather mode / improved performance during Wx events. Automatic Calibration for true Azimuth and Elevation displayed in 0.01 degrees. High resolution Brushless resolvers for ultimate position feedback. RS-232/422/485 and Ethernet, + control interface, all Standard / Front panel selectable New M&C monitor interface software with event triggered alarm features and email notifications to your laptop / cell phone or PDA. AC and DC configurations available. Ask about our newly revamped DC configurations.

ATX3000 Data Sheet

Research Concepts, Inc. provides a variety of competitively priced antenna control solutions for commercial, military and OEM usage. Competitively priced technology coupled with prestigious technical services makes Research Concepts a respected provider in antenna control solutions. Our highly-trained technician staff provide personalized customer care service.

Antenna Controller - Single-Axis - Dual Axis - Three Axis-Wikipedia

RC1500A Single Axis Satellite Antenna Controller

Description: The RC1500 antenna controller controls a single axis satellite antenna. The RC1500 interfaces to 36 volt actuators with single phase, pulse type position sense feedback. Two basic models are available, the RC1500A and RC1500B. The RC1500B can track inclined orbit satellites with either a single axis tracking mount or a single axis feed translation system.

RC1500A Data Sheet

RC1500B Single Axis Satellite Antenna Controller

Description: The RC1500 antenna controller controls a single axis satellite antenna. The RC1500 interfaces to 36 volt actuators with single phase, pulse type position sense feedback. Two basic models are available, the RC1500A and RC1500B. The RC1500B can track inclined orbit satellites with either a single axis tracking mount or a single axis feed translation system.

RC1500B Data Sheet

RC2000A Dual Axis Controller

Description: The RC2000A was designed to provide years of reliable operation through the use of a heavy duty solid-state drive network coupled with a novel micro controller-based fault monitoring system. The 8 amp drive output capability is unparalleled in the market and the Adapti-DriveTM digital servo speed control optimizes antenna movement for today’s demanding Ku-band applications. Additional features like an RS-422 communication port for PC control and a very user-friendly, menu scheme make the RC2000A a unique and highly adaptable

RC2000A Data Sheet

RC2000C Dual Axis Controller

Description: The RC2000 controller family is the industry standard for dual axis antennas with pulse type position sensor. The RC2000A is perfect for all geostationary satellite applications.  The RC2000C and RC2000X add the ability for Step-Track and Memory-Track for all geosynchronous satellite needs. RC2000C is well equipped to handle the demanding requirements for both domestic and international inclined - orbit satellite tracking.

RS2000C Data Sheet

RCI RC2000X Tracking/Remote Controlled Antenna Controller for Dual Axis Antennas

Description: There are a number of differences in the RC2000X compared to the RC2000C antenna controller. The user may edit AZ/EL positions in the track table. The RC2000X may be configured to step track any time signal strength is available and may also be configured to remain in step track mode and periodically peak a geostationary satellite that is not in an inclined orbit. The RC2000X may control a Seavey-style motorized feed but cannot control a 3-wire PWM servo-based polarization motor such as the Polarotor. The RC2000X can support an AZ/EL speed select bit output. The RC2000X supports full Remote Front Panel operations and may be controlled via Ethernet connection using the RCI Web Server device.

RC2000X Data Sheet

RC2500 Dual Axis Antenna Controller

RC2500B Tracking Dual Axis Antenna Controller

Description: The RC2500 Dual Axis Antenna Controller is designed to control antennas which use resolver based position sensors and employ an Antenna Interface Unit (AIU) at the antenna mounting pad. The RC2500 is available in both non-tracking and inclined orbit satellite tracking configurations

RC2500 Data Sheet

RC2500 AIU-1 Single Speed Antenna Interface Unit for Dual Axis Antennas

Description: Enjoy the High resolution and accuracy of resolvers as position sensors on antennas equipped with Single- Speed, 3-phase AC Motors. Allows the use of the RC2500 with virtually any antenna system. RCI RC2500AIU-2 36VDC Antenna Interface Unit for use with RC2500 ACU

RCI2500AIU4 Data Sheet

RC2500 AIU-3 Antenna Interface Unit for use with RC2500 Controller

Description: Enjoy the High resolution and accuracy of resolvers as position sensors on antennas equipped with Single Speed, 3-phase AC Motors. Allows the use of the RC2500 with virtually any antenna system.

RCI2500AIU2 Data Sheet
RCI2500AIU3 Data Sheet

RC3000 Tracking Antenna Controller/Satellite Locator

Description: The RC3000 is designed for use on mobile satellite uplink vehicles. The RC3000 combines the satellite location and antenna control capabilities of the RC8097 Satellite Locator with the inclined orbit satellite tracking and serial communications capabilities of the RC2000C. The RC3000 supports optional interfaces to an electronic compass and a GPS receiver.

RC3000 Data Sheet

RC3050 Three Axis Satellite Antenna Jog Controller

Description: The RC3050 is a three axis jog controller designed for use with mobile satellite antennas. The controller optionally supports automatic antenna stow/unstow and a handheld remote control.

RC3050 Data Sheet

RC3100 Auto Acquisition Antenna Controller for Transportable

Description: Auto Acquisition Sequence On power up, the user will be prompted to either auto acquire or stow the antenna. When the user selects Acquire, the ACU (antenna control unit) will deploy the antenna and perform a series of moves to determine the tilt of the platform. After the antenna is deployed, the ACU will position the antenna at the elevation angle required to align the antenna with the Signpost satellite, see Step #1 above. The signpost satellite is specified via the ACU’s Signpost Data Entry screen.

RC3100 Data Sheet

RC3500 Satellite Earth Station Antenna Control Unit

Description: Tracking Algorithm The RC3500 tracking algorithm can be divided into three distinct stages - STEP TRACK, MEMORY TRACK, and SEARCH. In STEP TRACK, the controller periodically peaks the receiver's AGC signal strength by jogging the antenna. The time and position are recorded in a track table maintained in the controller’s non-volatile memory. The interval between peakups is determined by antenna beam width (determined from antenna size and frequency band), satellite inclination and a user specified maximum allowable error (in dB). When a track table entry exists for the current sidereal time, STEP_TRACK switches to MEMORY_TRACK.A low threshold of 43dBHz, fast re-acquisition of less than 1s and high linearity, manufactured by Novella Satcoms Ltd.’s receivers the preferred choice for small antenna field deployable stations (C,X , Ku and Ka Band) requiring fast automatic satellite acquisition.

RC3500 Data Sheet

RC4500 Three Axis Antenna Controller

Description: The RC4500 Three Axis Antenna Controller is designed to control antennas which use resolver based position sensors and employ an Antenna Interface Unit (AIU) at the antenna mounting pad. The RC4500 is available in both non-tracking and inclined orbit satellite tracking configurations.

RC4500 Data Sheet

RC300 Flyaway Companion Transportable VSAT

Description: Auto Acquisition The days of endlessly searching the sky with your flyaway antenna are over. The RC300 Flyaway Companion from Research Concepts, Inc. brings all the power of RCI Auto Acquisition solutions to the non-motorized antenna. RC300 Flyaway Companion Example Video

RC300 Data Sheet

RC4000 Compact Outdoor Antenna Control Unit

Description: Utilizing the experience gained from integrating the RC3000 ACU with nearly 200 different antennas from dozens of mount manufacturers worldwide, RCI introduces its next generation Antenna Control Unit architecture. The RC4000 architecture consists of stackable cards allowing for flexible and compact ACU packaging. This hardware set allows for all the functionality and options (navigation sensors, inclined orbit tracking, remote control, integrated receivers, etc.) currently available with the RC3000. The RC4000 is designed for an operating temperature range of –40C to +60C.

RC4000 Data Sheet

RC4000 Next Generation Antenna Control Unit

Description: Utilizing the experience gained from integrating the RC3000 ACU with nearly 200 different antennas from dozens of mount manufacturers worldwide, RCI introduces its next generation Antenna Control Unit architecture. The RC4000 architecture consists of stackable cards allowing for flexible and compact ACU packaging. This hardware set allows for all the functionality and options (navigation sensors, inclined orbit tracking, remote control, integrated receivers, etc.) currently available with the RC3000. The RC4000 is designed for an operating temperature range of –40C to +60C.

RC4000N Data Sheet

RCI Antenna Control Web Server

Description: The Research Concepts Web Server provides operators the ability to control any of their RC1500, RC2000, RC2500, or RC3000 antenna controllers via their Ethernet Browser, eliminating any requirement for serial port connections.

• The Graphical User Interface allows automatic antenna movement, manual jog operation, displays system faults and allows system fault resets.
• Provides remote front panel operation and programming for RC2000A, RC2000X and RC3000.
• Download of configuration items for RC2000A and RC3000. Configuration upload also supported for RC2000A.
• Compatible with most web browsers including: Chrome, Safari, Firefox, Internet Explorer10/11, Edge and Opera.

RSWEBSVR Data Sheet

RC4500 AIU-7 Antenna Controller with Integrated Antenna Interface Unit

Description: Take advantage of RCI’s vast experience with embedded antenna controllers, cost savings and simplified installation when using the AIU-7 variable speed outdoor antenna controller with integrated RC4500 ACU. 16-Bit Resolver Position Sensors

RS4500AIU7 Data Sheet

APDLM4/16 : AUTOPILOT SOFTWARE, 4 CONTROLLERS, 16 REC.

Description: AutoPilot DLM AP DLM 4/16, Supports up to 4 steerable antennas and up to 16 receivers. Broadcast Automation Systems’ AutoPilot DLM package provides control for RC1000, RC2000, and RC2500 satellite antenna positioners, and Standard Agile Omni MT830, MT830BR, and MT930B or DX DIR657 A/B satellite receivers. Enhanced versions of the software are available which support other devices and dial up remote access. The AutoPilot DLM program is a 32-bit program designed to run on Windows 95/98 or Windows NT/2000

APDLM4 Data Sheet

AutoPilot DLM AP DLM 2/16, Supports 1 or 2 steerable antennas and up to 16 receivers

Description: Broadcast Automation Systems’ AutoPilot DLM package provides control for RC1000, RC2000, and RC2500 satellite antenna positioners, and Standard Agile Omni MT830, MT830BR, and MT930B or DX DIR657 A/B satellite receivers. Enhanced versions of the software are available which support other devices and dial up remote access. The AutoPilot DLM program is a 32-bit program designed to run on Windows 95/98 or Windows NT/2000

APDLM2 Data Sheet

C-COM Satellite Systems Inc

Established in 1997, C-COM Satellite Systems Inc. is a world leader in the design, development and manufacture of commercial grade, fully motorized, auto-pointing mobile antennas (iNetVu) for the delivery of broadband Internet to remote locations. The company has been a pioneer in the one-button, auto-deploy VSAT market – with over 7,000 units in the field, in over 100 countries. The iNetVu brand is synonymous with reliability, affordability and superior technology

Motorized - Auto-Pointing - iNetVu Controller-Wikipedia

iNetVu 7000 Controller

Description: The iNetVu^® 7000/24 VSAT Antenna Controllers are ideal for applications that require a quick, simple setup and reliable connection. Operating on 12V(7000) or 24V (7024), the iNetVu^® 7000/24 Controllers features optimal, high-precision carbon fibre, Auto-deploy antenna pointing, front panel configuration and GPS signal available for external devices.

7000 Controller Data Sheet

iNetVu 7024C Antenna Controller

Description: 7024C Features: One touch stand-alone solution. Front Panel Configurable
Compatible with all iNetVu® mobile platforms. Supports DVB-S1 and DVB-S2/ACM frequencies. Optimal, high-precision antenna pointing. Remote access and operation via Network, Web and other Interfaces. Built-in motion and movement protection for safety. Supports inclined orbit satellites. Integrated with multiple modems. Works with GPS and GLONASS Satellite Navigation Systems (1) Global Position Information available for external devices. Easy to configure and operate. Interoperable with Uplogix’s remote management appliances
Supported languages by GUI interface: English, Russian, Chinese (Mandarin, Traditional) and Spanish. Standard 2 year warranty

7024C Controller Data Sheet

iNetVu 7710 Controller

Description: The iNetVu® 7710 Controller is a simple stand-alone one touch operation to find satellite & stow antenna. Ideal for applications that require a quick, simple setup and reliable connection. Only works with iNetVu® mobile platforms which are equipped with 7720 on-board module such as the FLY-75V.

7710 Controller Data Sheet

iNetVu 3000C Hand-held Manual Controller

Description: The new iNetVu® 3000C Hand-Held Manual Controller has the same look and feel as a video game controller. It allows you to operate the platform without having the auto-pointing controller or PC attached to it. In addition, this controller makes it possible to operate the iNetVu® mobile antenna at variable speeds

3000C Controller Data Sheet

iNetVu 3024 Hand-held Manual Controller

Description: The new iNetVu® 3024 Hand-Held Manual Controller has the same look and feel as a video game controller. It allows you to operate the platform without having the auto-pointing controller or PC attached to it. In addition, this controller makes it possible to operate the iNetVu® mobile antenna at variable speeds

3024 Controller Data Sheet

Miscellaneous Controller

Satellite Telemetry, Tracking and. Control the spacecraft's functions and condition Autonomously select omni-antenna Antenna Control Unit. Provides power to the antenna. Displays antenna status. Contains diagnostic indicators. Enables manual satellite selection. Satellites and spacecraft are monitored and controlled via ground segment.  The controller. VertexRSI 7134 3-Axis Antenna Controller IDU only for fixed antennas. Capabilities for automatic multiple satellite access, program track, remote control via the network.

King - KVH - SeaTel - Fly-Away Vsatl-Wikipedia

Winegard Integrated IDU (Mount Controller) w/ F Connector

Description: This is the standard replacement Winegard mobile satellite internet mount controller for the Winegard WX1200 and other Winegard mobile satellite internet solutions!

WX-1200C Data Sheet

PC-104 Based Controller

Description: The P-Series Antenna Control Unit (ACU) is a digital control system that provides the necessary commands and displays required for real time operation of an antenna system, pedestal, and associated equipment. 

PC-104 Data Sheet

Auto Tracking Filters

Description: This Unit has the ability to seek out, lock-on and follow an RF signal anywhere in the tuning range of 1.0 - 2.1 GHz. This unit can be offset to automatically track a local oscillator frequency. Other units are available in octave ranges up to 8.0 GHz.

CMC200850 Data Sheet

Norsat CIDU Compact Satcom Indoor Unit

Description: The Norsat CIDU offers maximum Flexibility and durability. Like all Norsat equipment, the CIDU is extensively tested to withstand the elements in even the most remote and austere environments. With its 19”, 2RU chassis, the Norsat CIDU can accommodate a variety of customized IDU configurations Flexible. Intelligent. Tough. With its modular, compact design, the Norsat CIDU can house a power supply, a Satellite Acquisition Assistant Module, and a variety of user-selectable modems.

NORSAT-CIDU Data Sheet

KING QUEST - Universal Controller

Description: The KING UC1000 is a Universal Controller that makes the King Quest satellite TV antenna compatible with a variety of satellite receivers from DIRECTV, DISH and Bell (Satellite TV service and receiver not included).  The UC1000 lets you easily change from one satellite TV service provider to another on your KING Quest; no need to buy a new satellite antenna if you use multiple satellite providers or change providers.  Also includes a built-in security alarm to protect your satellite TV antenna investment. Easy-to-follow initial setup instructions included. Made in the USA

UC1000 Data Sheet

ACU-3D-24-CCPR Positioner Controller

Description: ACU-2D-24-CC controller used in many of the dual axis positioners supplied by ARA.specify any additional options included such as preamp bypass control, polarization options, etc.

ACU-3D-24-CCPR Data Sheet

Redundant LNA systems are the field-proven low noise amplifier product lines. Available in all common C-, X- and Ku-Band frequencies, and offering state-of-the-art noise temperature performance, these LNAs can be configured for use in 1:1, 1:2 and custom redundant systems.

Teledyne Paradise Datacom Ku-Band 1:2 Redundant LNA System

Description: Available in all common Ku-Band frequencies, and offering state-of-the-art noise temperature performance, these LNAs can be configured for use in 1:1, 1:2 and custom redundant systems. System monitoring and control is provided through the microprocessor-based RCP2-1100 and RCP2-1200 redundant system controllers.

1:2 Ku-Band Redundant Data Sheet

Teledyne Paradise Datacom Ku-Band 1:1 Redundant LNA System

Description: Available in all common Ku-Band frequencies, and offering state-of-the-art noise temperature performance, these LNAs can be configured for use in 1:1, 1:2 and custom redundant systems. System monitoring and control is provided through the microprocessor-based RCP2-1100 and RCP2-1200 redundant system controllers.

1:1 Ku-Band Redundant Data Sheet

Teledyne Paradise Datacom C-Band 1:1 Redundant LNA System

Description: At the heart of all Teledyne Paradise Datacom redundant LNA systems are the field-proven low noise amplifier product lines. Available in all common C-Band frequencies, and offering state-of-the-art noise temperature performance, these LNAs can be configured for use in 1:1, 1:2 and custom redundant systems. System monitoring and control is provided through the microprocessor-based RCP2-1100 and RCP2-1200 redundant system controllers. LNA plate assemblies are designed for convenient integration into any antenna hub or facility with RF and user interfaces readily accessible. Common feed interfaces are offered as standard and isolation is provided at all RF interfaces. A range of RF hardware options and custom plate configurations are offered to meet specific system requirements.

1:1 C-Band Redundant Data Sheet

Teledyne Paradise Datacom C-Band 1:2 Redundant LNA System

Description: At the heart of all Teledyne Paradise Datacom redundant LNA systems are the field-proven low noise amplifier product lines. Available in all common C-Band frequencies, and offering state-of-the-art noise temperature performance, these LNAs can be configured for use in 1:1, 1:2 and custom redundant systems. System monitoring and control is provided through the microprocessor-based RCP2-1100 and RCP2-1200 redundant system controllers. LNA plate assemblies are designed for convenient integration into any antenna hub or facility with RF and user interfaces readily accessible. Common feed interfaces are offered as standard and isolation is provided at all RF interfaces. A range of RF hardware options and custom plate configurations are offered to meet specific system requirements.

1:2 C-Band Redundant Data Sheet

Norsat UNIVERSAL LNB CONTROLLER

Description: Universal LNB / LNA Redundancy Controller. Key Features: Monitor the status of two LNB / LNA units. Operate in automatic. Redundant system utilizes the RCP2-1100 redundant controller to provide fault detection and switchover in the event of a LNB / LNA failure.

LNB Controller Data Sheet

RCP2-1200 Redundant Controller LNB CONTROLLER

Description: Teledyne Paradise Datacom can provide dual 1:1 redundant systems, 1:2 redundant systems, and a wide variety of custom systems. The outdoor equipment consists of the switch plate assembly and the Low Noise Block Down Converters and associated components. The controller provides complete visual indication of switch position, fault detection, and system status.

RCP2-1100 Controller Data Sheet
RCP2-1200 Controller Data Sheet

General Dynamics LRC-1000 C Band Redundant LNA System

Description: The General Dynamics LRC-1000 Series Redundant LNA systems minimize system downtime due to LNA failure by providing a spare LNA and an automatic means of switching to the spare upon failure of a primary LNA. A 1:1 system provides one spare LNA for one primary LNA. A 1:2 system provides a spare LNA for either of two primary LNAs. The systems consist of an outdoor plate assembly which mounts at the antenna hub, an indoor control panel and interconnecting control cable

LCR-1000 Data Sheet

Industrial-grade High-Speed 4 Port USB Hub

Description: Industrial grade, 4-port USB Hub  High ESD protection --- Ensures product will keep running with no system downtime High retention USB connectors --- Strong, reliable connections - even in high vibration environments Wide temperature -40 to 80°C --- Withstand extreme temperature conditions Rugged design in metal case --- Suitable for harsh industrial environments Panel or DIN Mount --- Fits into your application with flexible mounting configurations 4000 V isolation --- Meets EN60601-1-2 for medical applications Shock and vibration tested --- 50G shock and 4g vibration.  Downstream Power Bus Power = up to 100mA (per port), External Power = up to 500mA (per port)  Dimensions 5.5 x 3.5 x 1.4 in (139 x 87 x 35 mm) without panel brackets  Operating Temperature 40 to 80°C (-40 to 176°F) Mounting One DIN and two panel brackets included 

4PUSB-U4 Data Sheet

Industrial-grade High-Speed 4 Port USB Hub 4kV Isolated, 4-Port USB Hub (requires a power supply)

Description: USB Standards USB 1.1 and 2.0 compatible Upstream port (1) USB Type B Female – High retention (withdrawal >15 N) Downstream ports (4) USB Type A Female – High retention (withdrawal > 15 N) Speed 480Mbps, 12Mbps, 1.5Mbps Isolation 4 kV, Upstream port isolated from downstream ports ESD 8 kV contact, 15 kV air Power LED’s Power On USB Bus Power 5 VDC from USB bus; isolated model requires external power supply Input Power Voltage 10-30 VDC, external power via terminal block or locking barrel plug input.

201-USBHS4 Data Sheet

Industrial USB 2.0 hub for instant USB expansion Rack Mount 14 Port

Description: 1 x 14 USB Hub Rack Mount AC  Feature-rich design and reliable performance make this ideal for mission-critical environments. Applications include connecting devices to a hub powered by car or truck battery for mobile applications; adding Plug and Play USB compatibility to an older PC or laptop; and connecting USB peripheral devices at an office workstation.

USB14PEXT9 Data Sheet

Industrial USB 1.1 hub for instant USB expansion. 7 Port USB Hub 1.1

Description: AC PS included. Feature-rich design and reliable performance make this ideal for mission-critical environments. Applications include connecting devices to a hub powered by car or truck battery for mobile applications; adding Plug and Play USB compatibility to an older PC or laptop; and connecting USB peripheral devices at an office workstation.

7PUSB11 Data Sheet

AC -  7 Port USB 2.0 Hub

DC -  7 Port USB 2.0 Hub

Description: Feature-rich design and reliable performance make this ideal for mission-critical environments. Applications include connecting devices to a hub powered by car or truck battery for mobile applications; adding Plug and Play USB compatibility to an older PC or laptop; and connecting USB peripheral devices at an office workstation.

AC7PUSB Data Sheet

AC -  4 Port USB 2.0 Hub

DC -  4 Port USB 2.0 Hub

Description: Feature-rich design and reliable performance make this ideal for mission-critical environments. Applications include connecting devices to a hub powered by car or truck battery for mobile applications; adding Plug and Play USB compatibility to an older PC or laptop; and connecting USB peripheral devices at an office workstation.

4PUSBDC Data Sheet

Metal  4 Port USB 2.0 Hub

Description: AC or DC powered hubs that accept power from standard AC wall plugs or a range of 5.5-30VDC power sources, such as vehicle batteries. Plastic chassis and metal chassis models are available, and both are small enough to fit nearly anywhere.

4PUSB200 Data Sheet

Gimbal Motion Controls

Description: Gimbal motion controls consist of the SPS-2722 Servo Digital Controls and SPS-2840 Micro Digital Controls. The SPS-2722 is designed for commercial applications and the SPS-2840 is designed for military applications. Our gimbal motion controls are available in a variety of formats - VME, PC-104 or custom control cards. The gimbal motion controls are common across the entire stabilized gimbal system product line.

SPS-2722 Data Sheet

An Ethernet hub, active hub, network hub, repeater hub, multiport repeater, or simply hub is a network hardware device for connecting multiple Ethernet devices. There are three main devices that work to connect one computer to another computer. A network hub-Wikipedia switch-Wikipedia, and router-Wikipedia. A hub is the most basic networking device that connects multiple computers or other network devices together.