|
|
|
|
L-Band Optical
Transport - TRANSMITTER
Satellite
L-Band-Wikipedia RF Over Fiber Transmitter. LNB The L-Band fiber optic Transmitter/Receiver pair are used for transporting RF Satellite signals in the L Band over fiber from the antenna to the satellite receiver. By transporting the L-Band RF signal over Fiber. L band, long wavelengths, 1565–1625 nm. U band, ultralong. five telecom optical wavelength bands named O- E- S- C- and L
bands-Wikipedia
IF Fiber Optic
L-Band Transport
|
|
|
|
|
|
FIBER
TRANSMITTER, L-BAND SM SC/APC 12DB
Description:
Fiber
Optic single mode L band transmitter, Radiant Fiber Communications,
VB150S - series, 12 db @1310nm SC/APC card cage version
VB150S-T-RA3
Data
Sheet
|
TX,
"LL" Indoor 48-1000MHz, 13dBm
Description:
Olsen Technology "LL" Indoor TX, 48-1000MHz,
13dBm/20mW DFB, 90-240VAC, SC/APC
OTOT-1000-13
Data
Sheet
|
|
TX,
L-BAND STANDALONE, 500MHz-3GHz
OLRT-D3013-F3-F
Data
Sheet
TX
L-BAND STANDALONE 10MHz-4.0GHz
OLBT-X4013-D5-S
Data
Sheet
RX,
L-BAND MINIATURE STANDALONE
Description:
Olsen Technology "LL" Indoor TX, 48-870MHz, 6dBm/4mW
DFB, 90-240 VAC, SC/APC
OLMR-X2200-HG-S
Data
Sheet
|
TX
LL INDOOR 48-870MHz
OTOT-870-3
Data
Sheet
TX
"LL" Indoor 48-870MHz, 6dBm/4mW DFB
Description:
Olsen Technology "LL" Indoor TX, 48-870MHz, 6dBm/4mW
DFB, 90-240 VAC, SC/APC
OTOT-870-6 Data
Sheet
|
|
|
|
|
LBAND
OPTICAL CARD CHASSE
holds 6 cards
Description:
Card Cage, Radiant Fiber Communications, holds up to 6 L band
cards with internal & redundant power supplies
CR200RPS/VB50 Data
Sheet
|
L-Band
Optical Transmission Equipment
Description:
Chassis carrying up to
16 modules Optical transmitter module with RF bias feeding Optical
receiver module with RF sensing Monitoring output of
incoming/outgoing RF signal Monitoring of laser in transmitter and
receiver module Space requirement only 3 HU Redundancy switching
for transmission lines 1+1 and n+1
DEV7000 Data
Sheet
|
|
Dual
Channel Active Bias Tee L-Band for professional applications
Description:
Dual
channel active bias tee Frequency range 950-2150 MHz Dual
redundant power supplies with status output LNB bias current
monitoring RF outputs or optical outputs RF sensing with
adjustable threshold Space requirement only 1 HU
DEV 8125/OPT
Data
Sheet
|
L-Band
Distribution Amplifiers
1:8, 2x 1:8, 1:16 with optical inputs
Description:
50 and 75 Ohm versions available Optical receiver with RF
sensing Monitoring output of outgoing RF signal Laser light low
detection
DEV2182
Data
Sheet
|
|
|
|
|
RSS-2L
L-Band/LNB Feed Automatic Redundancy Switch
RSS2L Data
Sheet
|
RFS-2150
L-band (950-2150 MHz) Sensing Redundancy Switch
RFS-2150 Data
Sheet
|
|
LS4150P
L-band (950-2150 MHz) Passive Splitters
LS2150P
Data
Sheet
LS4150A
L-band (950-2150 MHz) Active Splitters
LS2150A
Data
Sheet
|
SRR-Series
RF Routing Switches
SRR-Series
Data
Sheet
|
|
See:
Splitters
/ Dividers
|
|
|
L
Band Satellite Fiber Optic Transport Link
EM3005
Data
Sheet
|
Emcore
3000 Series Satellite L-Band teleport transport system
Description:
Teleport environment. Spanning the entire L-Band frequency
range (950-2150 MHz), the link employs a number of feature rich
components to create a highly reliable system. Available in
stand-alone or 3RU rack-mount configurations, the units may be
specified for conventional 1310 nm or 1550 nm operation, CWDM
operation or DWDM operation. CWDM or DWDM optics greatly expand
the potential capacity of installed optical fibers by allowing up
to 16 separate transmitters to be accommodated on one single-mode
fiber.
EM3000
Data
Sheet
|
|
L-Band
Satellite Fiber Optic Transport
Description:
Emcore 2990Pro L-Band Satellite Fiber Optic Transport The
Emcore Model 2990PRO L-Band Satellite Transport System provides an
economical solution for transporting digital signals for numerous
satellite distribution applications, including head end relocation,
and distribution of digital broadcast systems (DBS). The Emcore
2990PRO utilizes a cost-effective coax cabling configuration to
distribute the RF signals from the dish to the transmitter and
from the receiver to the head end.
EM2990PRO
Data
Sheet
|
Multiple
L-Band Distribution Amplifiers (DAs) and/or Distribution Matrix
switches integrated in a 4 HU Chassis
Description:
Up to 12 amplifiers with optical input Up to 12x 1:8 or 8x
1:16 distribution amplifiers in a 4 HU chassis Up to 3 matrix
switches 4:11 or one 4:60 Reduced space requirement for lower
budget 50 W, 75 W and mixed versions Dual redundant power supplies
field replaceable in service Field serviceability without
de-installation Monitoring output @ 0 dB at the front panel for
each input
DEV2180OPT
Data
Sheet
|
|
Rugged
L-Band Link
Description:
The Olson Model OLRT/OLRR Rugged L-Band Link offers a high
performance, versatile transport link in a very compact and rugged
package. The Rugged L-Band Link has been engineered to meet
today’s high performance standards for L-Band transport with an
extreme bandwidth range that will also allow the system to handle
the next generation of satellite signals. The Olson OLRT/OLRR is
ideal for a wide variety of communications applications, including
LBand satellite antenna remoting, trunking radio, telemetry tracking, and time and frequency reference distribution. The
standard frequency range is 500MHz to 3,000MHz. The extended
frequency range option of10MHz to 3.6GHz allows this system to
accommodate additional transponders coinciding with common
European satellite communication applications.
OLRT/OLRR
Data
Sheet
|
Rugged
3.0GHz L-Band Optical Transport
Description:
Rugged 3.0GHz L-Band Optical Transport Link transmits 500MHz
to 3,000MHz RF signals. The link offers high or low gain, and can
be specified for 1310nm, 1550nm, or CWDM wavelengths. The
transmitters offer remote LNB powering, and the link is configured
in a rugged standalone enclosure.
OLRT Data
Sheet
|
Evertz Fiber L-Band
Evertz Microsystems
Ltd., a manufacturer of high quality digital broadcast and film
products distributed
|
|
2408LT
L-Band Outdoor Fiber Transmitter with VistaLINK and SmartMON
Description:
The 2408LT is an
outdoor fiber optic transmitter for RF signals in the satellite
L-Band or wider frequency range. It accepts a single RF input on
coaxial cable and provides a single output for optical
transmission. Packaged in a compact, standalone enclosure, the
2408LT is ideal for mounting on or near the satellite dish antenna
structure. The -WP version features dust and water protection
allowing outdoor mounting without a secondary enclosure. A
full-power RF monitor output provides a convenient means of
obtaining peak satellite signal strength, or additional signal
distribution.
2408LT Data
Sheet
|
|
7706LT
Wideband in extended L-Band
Description:
The 7706LT is a fiber optic
transmitter for RF signals in the extended L-Band or wider
frequency range. It accepts a single RF input on coaxial cable and
provides a single output for optical transmission. An RF monitor
output provides a convenient means of obtaining peak satellite
signal strength, or additional signal distribution. Gain may be
adjusted manually or managed automatically via AGC. 13/17V DC
adjustable LNB power with 22kHz tone is also provided.
7706LT
Data
Sheet
|
|
7807LT-2 Dual L-Band/Wideband RF Fiber Transmitter with VistaLINK and SmartMON
Description:
The 7807LT-2 is a dual
fiber optic transmitter for RF signals in the extended L-Band or
wider frequency range. It accepts two RF inputs from coaxial cable
and provides two outputs for optical transmission. An RF monitor
output is provided for each input, which offers a convenient means
of obtaining peak satellite signal strength, or additional signal
distribution. With two optical transmitters per single-slot card,
the 7807LT-2 provides a high density economical solution.
7807LT-2 Data
Sheet
|
7707IFTA
70/140Mhz IF Fiber Transmitter
Description:
The 7707IFTA accepts
one 70/140MHz coaxial input and provides a fiber optic output
signal at 1310nm, 1550nm, CWDM or DWDM wavelengths. An additional
electrical output is also provided for monitoring or further
signal distribution. Monitoring and control of card status and
parameters is provided locally at the card edge and remotely via
VistaLINK
7707IFTA Data
Sheet
|
|
7708LT Fiber Transmitter
Description:
The 7708LT is a fiber
optic transmitter for RF signals in the extended L-Band or wider
frequency range. It accepts a single RF input on coaxial cable and
provides a single output for optical transmission. An RF monitor
output provides a convenient means of obtaining peak satellite
signal strength, or additional signal distribution.
7708LT Data
Sheet
|
|
Blonder Tongue Fiber L-Band
Blonder Tongue is
a leader in cable television communications, serving the
professional video markets with comprehensive solutions for
content contribution,
products and solutions for 65 years of innovations,
brand recognition, quality, and value play integral parts in each
and every product we make.
|
|
L-Band
Fiber
Optic Transmitter
Description:
Affordable Alternative to Coaxial LNB Cabling. Compact and
Environmentally Protected Housing. 850-3000 MHz Bandwidth For
Enhanced Frequency Stacking Applications.18 dB Optical Loss
Budget.
S3A-3000 Data
Sheet
|
|
Blonder
Tongue L-Band
Multi-Output
L-Band Fiber Optic Transmitter, 8 Outputs
FILT-S3A-2050-8
Data
Sheet
Multi-Output
L-Band Fiber Optic Transmitter, 12 Outputs
FILT-S3A-2050-12
Data
Sheet
|
|
See: IF
/ L-Band Receivers
|
See:
AC
/ DC
|
|
See: Splitters
and Dividers
|
See:
Multi-Switches
|
|
Blonder
Tongue
Multi-Output
L-Band Fiber Optic Transmitter, 16 Outputs
Description:
L-Band Fiber Optic Transmitter The FILT-S3A-2050-8/12/16
series of fiber optic transmitters allow the operator to
distribute DTH/DBS signals from a single satellite dish to
multiple locations via single mode fiber. The transmitter is
available in 8, 12, and 16 output versions to accommodate a
variety of MDU topologies. The unit features automatic gain
control (AGC) on the satellite input to help ensure optimum input
levelswith changes in weather. The transmitter is equipped with
two LED indicators, one for power on (green) and the other for a
low RF input alarm (red). For remote monitoring.
FILT-S3A-2050-16
Data
Sheet
|
Blonder
Tongue Multi-Output
L-Band Fiber Optic Node, 24 Outputs Transmitter
FILN-S3A-2050-24
Data
Sheet
Blonder
Tongue Multi-Output
L-Band Fiber Optic Node, 8 Outputs
Description:
L-Band Fiber Optic Transmitter - Fiber
Optic L-band Transmitters
FILN-S3A-2050-8 Data
Sheet
|
|
|
|
Thor Fiber L-Band
Custom solution engineering, extensive on-site testing, made in the USA, and unparalleled 5-year extensive warranty on all Thor built products help make Thor a leader in global telecom fiber optic engineering. We develop custom solutions for fiber and broadcast applications, including Video Over IP, RF Over Fiber and Video Over Fiber, and focus on helping clients to best determine exactly what they need and which are the most efficient and cost effective solutions to their information technology needs.
|
|
L-BAND Singlemode
Fiber Transmitter for 10km
Description:
L-Band RF satellite signal extender over fiber optic cable
transport system. multiple L-band fiber optic transport up to 80
Km. Can also provide LNB power at various voltages.
L-BAND Singlemode
Fiber Transmitter for 40km
F-LBAND-RX-10
Data
Sheet
|
|
L-BAND Singlemode
Fiber Transmitter for 80km
Description:
L-Band RF satellite signal extender over fiber optic cable
transport system. multiple L-band fiber optic transport up to 80
Km. Can also provide LNB power at various voltages.
L-BAND Singlemode
Fiber Transmitter for 120km
F-LBAND-RX-20
Data
Sheet
|
|
4Ch
L-Band Dish Satellite TV Fiber TX/RX 1- 32 end points
Description:
4 LNB/Satellite TV
Polarities over 1 strand single mode fiber up to 40Km for Remote
Dish locations. The most convenient way to transport any modern
Satellite signal over single mode fiber using an internal
multiplexer to carry up to 4 signals of RF Satellite feeds
FLB41-RX-CWDM-XX
Data
Sheet
|
4LNB's
Satellite Distribution System for MDU over 1 fiber up to 5000
endpoints
Description:
L-Band
signal to almost an unlimited number of end points. In correlation
with using triple play CWDM passives, it is possible to transport
4 L-bands and bi-directional gigabit Ethernet over one single mode
fiber.
Satellite distribution systems specifically designed for MDU / MTU
and Fiber to the home applications. System can supply Satellite TV
up to 5000 houses from one dish
F-LB41-DWTX Data
Sheet
|
|
6
Ch L-Band Dish Satellite TV distribution system for MDU
Description:
The
F-LB61-DWDM system from Thor Broadcast is designed to deliver 6
independent coax feeds from satellite antennas over fiber optic
cable. These systems are similar to the standard LB61
systems from Thor, but with upgraded laser optics compatible with
EDFA optical amplifiers
F-LB61-DWDM
Data
Sheet
|
6 Ch L-Band Dish
Satellite TV Fiber TX/RX 1- 32 end points
Description:
The
F-LB61 system from Thor Fiber is designed for use with satellite
TV systems that have six LNB coax cables coming from the antennas.
These are typically systems that support an additional antenna
used for international content or free to air programming.
The
LB61 solution will work with most standard satellite TV antennas
such as DirecTv and
Dish Network
systems.
F-LB61-RX
Data
Sheet
|
Foxcom L-Band
Since its founding in 1993, Foxcom has been recognized worldwide as a leading manufacturer of advanced RF Optical Solutions for the commercial, government and military & defense markets. The company was acquired in 2014 by the Global Invacom Group.
|
|
AL5T3
Compact Optical Transmitter
Description:
Foxcom's AL5T3 Compact optical transmitter is the latest addition to the BsmarTV suite of products. The BsmarTV platform is a cost effective system to distribute between two and 5 L-Band (SAT-IF) polarities, and one Cable TV and digital terrestrial signals. The BsmarTV compact series of transmitters is designed for deployments in both small and medium buildings.
AL5T3
Data
Sheet
|
|
AL5T3-1-CWDM-5 Compact Fiber Optic Transmitter
Description:
The AL5T3-1-CWDM-5 transmits multiple satellite TV signals to multiple homes over a single optical fiber. This compact solution, which boasts 5 expanded L-band (200-2500MHz) inputs, is capable of supporting a variety of satellite television platforms. This transmitter is equipped with five dedicated DFB lasers to ensure stability and integrity of the signal. The internal multiplexer enables the installer to deliver up to five L-band signals over a single fiber. The AL5T3-1-CWDM is designed to be used with a Foxcom optical splitter in point-to-multi-point applications. Depending on design requirements, the AL5T3-1-CWDM can be used with either the AL5R-55 or the CR-14.
AL5T3-1-CWDM-5
Data
Sheet
AL5T3-1-CWDM-5KIT Data
Sheet
|
Atlantic
Satellite L-Band
Atlantic Satellite
Corporation (ASC) was founded in 2002 by Larry Hayes and Rick
Jones based on one simple idea-provide high quality Satellite
Communication products and services "at an economical
price". Atlantic Satellite Corporation offers over 50 years
of combined expertise in Satellite Communications Equipment and
systems design, manufacturing and services. The company's primary
line of products include Beacon Tracking Receivers, Frequency
Conversion Products, such as Up converters and Down converters, an
assortment of hand-held test equipment, and much more.
|
ASC300-LW L-Band
Description:
L
Band Satellite Beacon Receiver. Input Frequency: 930 MHz to 2300
MHz. Ethernet and Continuous Digital Streaming Options. Designed
to real time track the power density of a satellite beacon and
output a temperature stabilized DC voltage that is linearly
proportional to the beacon power by utilizing a true, RMS-responding
power detector. Applications: Antenna Tracking Controllers /
Uplink Power Controllers.
ASC300-LW
Data
Sheet
|
|
ASC300-LW-HC L-band
Description:
L
Band Satellite Beacon Receiver, High Stability. AFC:
±60 kHz. Input Frequency: 930 MHz to 2150 MHz.
Ethernet and Continuous Digital Streaming Options. Designed to
real time track the power density of a satellite beacon and output
a temperature stabilized DC voltage that is linearly proportional
to the beacon power by utilizing a true, RMS-responding power
detector. Applications: Antenna Tracking Controllers / Uplink
Power Controllers / Telemetry Beacons.
ASC300-LW-HC
Data
Sheet
|
ASC300L-D L-band
Description:
L
Band Satellite Beacon Receiver. Input Frequency. L Band Satellite
Beacon Receiver. Input Frequency: 930 MHz to 2300 MHz.
Ethernet and Continuous Digital Streaming Options. The Model
ASC300L-D Beacon Receiver is a designed for data tracking with
side band rejection. Designed to real time track the power density
of a satellite beacon and output a DC voltage that is linearly
proportional to the beacon power. Applications: Antenna Tracking
Controllers / Uplink Power Controllers: 930 MHz to 2300 MHz.
Ethernet and Continuous Digital Streaming Options. Designed to
real time track the power density of a satellite beacon and output
a temperature stabilized DC voltage that is linearly proportional
to the beacon power by utilizing a true, RMS-responding power
detector. Applications: Antenna Tracking Controllers / Uplink
Power Controllers.
ASC300L-D
Data
Sheet
|
ASC302LE-L L-Band
Description:
Dual
L Band Satellite Beacon Receivers. Two independent units in a
single rack mount space. Input Frequency: 930 MHz to 2150
MHz. Ethernet and Continuous Digital Streaming Options.
Designed to real time track the power density of a satellite
beacon and output a temperature stabilized DC voltage that is
linearly proportional to the beacon power by utilizing a true, RMS-responding
power detector. Applications: Antenna Tracking Controllers /
Uplink Power Controllers. Band Satellite Beacon Receiver. Input
Frequency: 930 MHz to 2300 MHz. Ethernet and Continuous Digital
Streaming Options. Designed to real time track the power density
of a satellite beacon and output a temperature stabilized DC
voltage that is linearly proportional to the beacon power by
utilizing a true, RMS-responding power detector. Applications:
Antenna Tracking Controllers / Uplink Power Controllers.
ASC302LE-L
Data
Sheet
|
Ku-Band Fiber Optic Receiver
Description:
Ku
Band Satellite Beacon Receiver. Tri Band Extended Input Frequency:
10.7 to 12.75 GHz. Ethernet and Continuous Digital Streaming
Options. Designed to real time track the power density of a
satellite beacon and output a DC voltage that is linearly
proportional to the beacon power by utilizing a true, RMS-responding
power detector. Applications: Antenna Tracking Controllers /
Uplink Power Controllers3.4 to 4.2 GHz. Ethernet and Continuous
Digital Streaming Options. Designed to real time track the power
density of a satellite beacon and output a temperature stabilized
DC voltage that is linearly proportional to the beacon power by
utilizing a true, RMS-responding power detector. Applications:
Antenna Tracking Controllers / Uplink Power Controllers.
ASC300KU1-E Data
Sheet
ASC300KU2-E Data
Sheet
|
Ku-Band Fiber Optic Receiver
Description:
Ku
Band Satellite Beacon Receiver Internal BDC. Input Frequency:
10.7 to 11.7 GHz. Ethernet and Continuous Digital Streaming
Options. Designed to real time track the power density of a
satellite beacon and output a temperature stabilized DC voltage
that is linearly proportional to the beacon power by utilizing a
true, RMS-responding power detector. Applications: Antenna
Tracking Controllers / Uplink Power Controllers. L Band Satellite
Beacon Receiver. Input Frequency. L Band Satellite Beacon
Receiver. Input Frequency: 930 MHz to 2300 MHz. Ethernet and
Continuous Digital Streaming Options. The Model ASC300L-D Beacon
Receiver is a designed for data tracking with side band rejection.
Designed to real time track the power density of a satellite
beacon and output a DC voltage that is linearly proportional to
the beacon power. Applications: Antenna Tracking Controllers /
Uplink Power Controllers: 930 MHz to 2300 MHz. Ethernet and
Continuous Digital Streaming Options. Designed to real time track
the power density of a satellite beacon and output a temperature
stabilized DC voltage that is linearly proportional to the beacon
power by utilizing a true, RMS-responding power detector.
Applications: Antenna Tracking Controllers / Uplink Power
Controllers.
ASC300KU1-I Data
Sheet
ASC300KU2-I Data
Sheet
|
|
See: RECEIVERS IF / L-Band Fiber
|
|
C-Band
Fiber Optic Receiver
Description:
C
Band Satellite Beacon Receiver Input Frequency: 3.4 to 4.2 GHz.
Ethernet and Continuous Digital Streaming Options. Designed to
real time track the power density of a satellite beacon and output
a temperature stabilized DC voltage that is linearly proportional
to the beacon power by utilizing a true, RMS-responding power
detector. Applications: Antenna Tracking Controllers / Uplink
Power Controllers.
ASC300C Data
Sheet
|
|
Multiple LNB Transport up to 6 LNB IF Satellite TV Polarities over 1 strand single mode
fiber-Wikipedia up to 40Km for Remote Dish locations. The most convenient way to transport any modern satellite signal over single mode fiber using an internal multiplexer to carry up to 6 signals of RF Satellite feeds. Tri Band Extended Input Frequency: 10.7 to 12.75 GHz. Antenna Tracking Controllers / Uplink Power Controllers. IF and L Band Satellite Beacon Receiver. Compact fiber optic transmitter for RF signals L-Band signals within the extended L-Band range of 700MHz to 2300MHz. Pair with the
L-Band-Wikipedia fiber optic.
|
|
|
About
Satellite | Government
|
Custom
Built |
RX/TX |
About
Us |
Contact Us
Call Today: (954) 941-8883 
