RF CATV optical transmitter
Broadband Transport
Blonder Tongue FIBT
The FIBT transmitters are EIA 19" wide rack mountable with a height of 1.75 Blonder Tongue FIBT/MIBT Fiber Optic VSB/AM Transmitter - The Blonder Tongue FIBT-S3A and MIBT-S3A Series of transmitters provides a robust system for transferring broadband CATV signals over single mode optical fibers. Both series have a a frequency bandwidth of 45- 860 MHz that accommodates a variety of different modulation formats such as AM/VSB, 8VSB, QAM, QPSK, etc. The Blonder Tongue FIBT/MIBT-S3A series transmitters use high-power, low noise 1310 nm distributed feedback (DFB) laser diodes
Blonder Tongue MIBT
The MIBT transmitters utilize the MIRC-12V rack chassis and MIPS-12C power supply for mounting. Each MIBT-S3A cupies 2 slots within the MIRC chassis, therefore up to six (6) MIBT-S3A transmitters can be installed in 2 RU's.Blonder Tongue FIBT/MIBT Fiber Optic VSB/AM Transmitter - The Blonder Tongue FIBT-S3A and MIBT-S3A Series of transmitters provides a robust system for transferring broadband CATV signals over single mode optical fibers. Both series have a a frequency bandwidth of 45- 860 MHz that accommodates a variety of different modulation formats such as AM/VSB, 8VSB, QAM, QPSK, etc. The Blonder Tongue FIBT/MIBT-S3A series transmitters use high-power, low noise 1310 nm distributed feedback (DFB) laser diodes
VL2340-T10
10 milliwatt 40 channel
VL2340-T13
20 milliwatt 40 channel
There are two versions of systems 40 channel and 80 channel units. Both systems will transmit CATV signals from 20 MHz to 860 MHz in bandwidth. The VL2200/2300 broadband systems are designed to be used in small to medium campus links, which can incorporate high split couplers. They will transport up to 80 VSB-AM video channels up to 30 km while maintaining good Carrier to Noise and Carrier to Distortion parameters. Only available in 1310 nm
VL2380-T10
20 milliwatt 80 channel
VL2380-T13
20 milliwatt 80 channel
There are two versions of systems 40 channel and 80 channel units. Both systems will transmit CATV signals from 20 MHz to 860 MHz in bandwidth. The VL2200/2300 broadband systems are designed to be used in small to medium campus links, which can incorporate high split couplers. They will transport up to 80 VSB-AM video channels up to 30 km while maintaining good Carrier to Noise and Carrier to Distortion parameters. Only available in 1310 nm
Emcore Force 2805
Emcore/Force 2805 110 Channel CATV Private Network Solution (pns) Fiber Optic Transmitter - The CATV® Linx Emcore/Force Model 2805 110 Channel CATV Private
Network Solution (PNS) transmitter is part of a robust system for transferring up to 110 channels of VSB/AM modulated signals over a single-mode optical fiber. The system provides 40-870 MHz of usable bandwidth for video signals stacked at 6 MHz intervals. A low loss single-mode optical fiber allows full channel loading to beyond 20 km while maintaining a good carrier-tonoise ratio. The emcore/Force Model 2805 may be used with the Emcore/Force Model 2807 mini-node receiver for use in return path and multiple splitter applications or with the Emcore/Force Model 2808 receiver for basic 110 channel CATV transmission. In all cases, the link provides excellent performance for many demanding applications such as broadband LANs, distance learning, and multiple data services.
Emcore Force Model 2804
Ecore/Force 110 Channel CATV Professional Distribution Solution (pds) Fiber Optic Transmitter - The Emcore/Force CATV® Linx Model 2804 110 Channel CATV Professional Distribution System (PDS) transmitter for transferring up to 110 channels of VSB/AM modulated signals over a single-mode optical fiber. The system is also suitable for transferring 80 CATV channels along with 30 digital QAM channels in the upper frequency range. The Emcore/Force Model 2804 provides 40-870 MHz of usable bandwidth for video signals stacked at 6 MHz intervals. A low loss single-mode fiber allows full channel loading to beyond 20 km while maintaining a good carrier-to-noise ratio. A key power lock ensures the transmitter cannot be accidentally turned off, and a blue 7-segment LED readout allows the user to monitor a number of system parameters.
OTOT-EM55X
Model OTOT-EM55X 1550nm Low-Cost Externally Modulated optical transmitter is a high performance, dual optical output transmitter for analog and digital CATV signals and digital data. A continuous-wave (CW), 1550nm low RIN, high power, DFB source laser is used in conjunction with a Mach-Zendher lithium niobate electro-optic modulator, where the light is intensity modulated by the RF input signal. This external modulation technique produces a very low chirp signal which allows robust, high quality 1550nm transmission over conventional 1310nm non-dispersion shifted fiber such as SMF-28. The OTOT-EM55X offers fixed SBS suppression of +16.5dBm and bandwidth from 48-870 MHz.
OTOT-EM55XL
Model OTOT-EM55XL 1550nm High Performance Externally Modulated optical transmitter is a high performance, dual optical output transmitter for analog and digital CATV signals and digital data. A continuous-wave (CW), 1550nm low RIN, high power, DFB source laser is used in conjunction with a Mach-Zendher lithium niobate electro-optic modulator, where the light is intensity modulated by the RF input signal. This external modulation technique produces a very low chirp signal which allows robust, high quality 1550nm transmission over conventional 1310nm non-dispersion shifted fiber such as SMF-28. The OTOT-EM55XL offers variable SBS suppression to +19dBm, bandwidth from 48-1,000 MHz and a sophisticated SNMP & web software interface. The Model OTOT-EM55XL is available in DWDM ITU wavelengths and has the unique ability to tune the DWDM channel ±100GHz from the front panel
OTOT-870
1310nm 870MHz forward path optical transmitter may be specified in a variety of DFB laser output powers, providing superior performance over a wide range of optical budgets to 21-25dB. This allows for unrepeatered spans of over 60-70km (38-45 miles)
OTOT-870-FQ
The Mode OTOT-870-FQ 1550nm 870MHz QAM broadcast transmitter utilizes a next-generation directly modulated, high-quality, low-chirp, optically isolated DWDM laser with a single +9dBm optical output. The Model OTOT-870-FQ DM QAM transmitter can also achieve a high level of spectral purity, comparable to that of EM sources (but at < 30% of the cost of comparable EM transmitters), making it the ideal choice for today’s FTTH & CATV deployments
OTOT-1000
Model OTOT-1000 1310nm forward path optical transmitters may be specified in a variety of DFB laser output powers, providing superior performance over a wide range of optical budgets to 21-25dB. This allows for unrepeatered spans of over 60-70km (38-45 miles)
OTOT-1000-FQ
Model OTOT-1000-FQ is a very cost effective indoor 1GHz QAM laser transmitter with an RF passband of 550 to 1,002MHz. The transmitter, including a universal AC power supply, has a footprint of 7.5" x 5.5" x 1.6". The optical output power of the OTOT-1000-10-FQ is +10dBm. Each transmitter has a universal power supply and will operate from 90 to 240VAC at 50 or 60Hz and consumes about 10 Watts.
OTOT-1000-FF/FG
Model OTOT-1000-FF/FG transmitter utilizes a next-generation directly modulated, high-quality, low-chirp, optically isolated DWDM Laser with a single +10dBm optical output. The unit is a rugged self-contained device with exterior RF and optical connections and test points. The field-configurable SC/APC (or optional FC/APC) optical output connector can be mounted on the front-panel or rear-panel of the unit. The transmitter features a unique provision which allows the unit to perform as a standalone flange-mount transmitter -OR- as a rack mount transmitter with the addition of the optional Model OTLL-RMKIT-1. Up to three (3) OTOT-1000’s can be mounted in a 1RU (1.75") 19" EIA space with each kit, or the user and mix-and-match various LaserLite components (i.e. transmitters, receivers, couplers, etc.), as required
OTPN-1000, OTPT-300
Olsong Technology OTPN-1000, OTPT-300 Optical Node Receiver with Optional Return Transmitter - The OLSON TECHNOLOGY INC. LaserLite Model OTPN-1000 is a high quality, full featured, cost effective CATV node designed around the latest optical receiver technology to reliably deliver a full slate of multiplexed video, high speed data and telephony services in an HFC broadband environment. The unit is ideally suited for direct fiber transmission of CATV RF signals in FTTC, FTTH, MDU, industrial, corporate, government, educational or other I-Net applications where a high performance, compact indoor node receiver is required.
Olson Technology OTOT-870-x
Olson Technology OTOT-870-x Standalone or Rackmount 1310nm Optical Transmitter - The OLSON TECHNOLOGY INC. LaserLite Model OTOT- 870 is a high quality, full featured, cost effective CATV transmitter designed around the latest optical component technology to reliably deliver a full slate of multiplexed video, high speed data and telephony services in an HFC broadband environment. A comprehensive lineup of DFB laser offerings provides superior performance over a wide range of optical budgets to 21-25dB, allowing unrepeatered spans of over 60-70km (38-45 miles) when used in conjunction with high performance, highsensitivity node receivers like the Olson Technology Models OTPN-1000 or OTMN-II. The unit is ideally suited for direct fiber transmission of CATV RF signals in FTTC, FTTH, MDU, industrial, corporate, government, educational or other I-Net applications where a high performance, compact, standalone transmitter is required for desktop, shelf or wall-mounting.
PBN ODN2P
PBN ODN2P Optical Distribution Node 2 Ports - The PBN Light Link Series 2 optical distribution node with two amplified RF ports (ODN2P) has been designed to deliver interactive CATV and high capacity DOCSIS service. The PBN ODPN2P is IP67 rated and suitable for outdoor and indoor applications. The PBN ODN2P deep fibre node solution suits the last-mile in broadband access networks. The small and rugged design makes this unit an ideal answer for fiber-to-the apartment and fiber-to-the-curb applications. The PBN ODN2P can also be equipped with return path transmitter modules for various optical wavelenths, making CWDM single Fiber operation a viable option.
PBN LT1310
The PBN Light Link® Series 2 optical transmitters employ high performance thermally stabilized distributed feedback (DFB) lasers with integrated optical isolator. The unit transmits AM-VSB, CATV, CCTV, DVB-C and DVB-T signals together with DOCSIS over a 1310 nm single mode optical fiber. The PBN LT1310 optical transmitter incorporates a comprehensive alarm and status monitoring system of all laser operating parameters such as DC laser bias current, laser temperature, cooler current, optical output power, RF levels, and more.
PBN ODN4P
PBN ODN4P Optical Distribution Node - The PBN Light Link Series 2, deep fiber optical distribution Node ODN4P is a prime building block for high performance networks, designed for adaptability, scalability and optional return path segmentation. The configuration options are well suited for Hybrid Fiber Coaxial (HFC) networks with smaller nodes and very high traffic handling capability for internet and telephony. This node employs advanced modular technology to provide a cost effectice and flexible solution for expanding network architectures. the optical distribution node may be configured with up to two optical receivers, two return path optical transmitters and two power supply units, hence providing network reduncdancy. The node incorporates four high RF outputs up to 870 MHz or 1000MHz. The PBN ODN4P utilizes the latest in fiber optic technology to emerge as the final active component in the fiber network. Designed to fiber-to-the-curb (FTTC) deployment. This node is also well suited for the last mile in fiber-to-the-premises (FTTP) applications
PBN RLM
PBN RLM Return Laser Module For AMCP1315 - The PBN RLM return path laser module is a plug-in transmitter designed to fit into the AMCP1315. The PBN RLM provides an economic solution for upstream transmission of DOCSIS return data or other two-way HFC applications. The plug-in module is used together with a diplexer inside AMCP1315 to suite a variety of frequency band-splits. This makes the AMCP1315 optical node a versatile unit for connecting multi-apartment buildings (MDU)
PBN LTM13
LTM13 Light Link Series 3 Optical Communications Mainframe Laser Transmitter Module - The PBN LTM13 Multi Quantum Well (MQW) Distributed Feedback (DFB) laser transmitter module has been designed for cable television and HFC broadband applications. The PBN LTM13 module easily fits into the OCM chassis with plug and play technology to suit a variety of applications. The laser transmitter module is available in optical power levels from 2 dBm to 15 dBm. The unit offers superior frequency response, distortion and noise characteristics. The PBN LTM13 incorporates specialized circuitry to deliver the best possible CTB and CSO performance up to 862 MHz.
PBN LTM15
PBN LTM15 Light Link Series 3 Optical Communications Mainframe Laser Transmitter Module - The PBN Light Link® Series 3, LTM15 optical transmitter module has been designed to complement the OCM system with optical transmission in the 1550 nm wavelength range. This transmitter employs high performance, thermally stabilised DFB low-chirp isolated lasers to transmit AM-VSB CATV or DVB-QAM signals on one ITU frequency grid optical wavelength within the 1550 nm range. The PBN LTM15 suits single mode optical fibers with or without dense wavelength division multiplexing (DWDM).
Motorola GX2
Motorola GX2 Optical Broadband Transmission Platform - The Motorola OmniStar GX2 provides increased module density, while continuing the OmniStar legacy of scalability, performance, and flexibility. The four rack-unit chassis accepts up to 16 Plug-n-Play application modules, minimizing headend space requirements. A two rack-unit mini-chassis is also available that holds three application modules. With superior 1310 nm and 1550 nm products, The Motorola OmniStar GX2 enables you to offer more revenue-generating services.
Motorola SG2000
Motorola SG2000 Telecommunications Optical Node - The Motorola SG 2000 telecommunications optical node is the next generation of Cableoptics® node products. This node is designed to support the evolving technologies and services being introduced in broadband networks, e.g., digital compression, PCS and alternate access. The Motorola SG 2000 meets the latest demands of single and two-way broadband network applications including broadcast video, telephony and data. Fully configured to meet your specific system requirements, the Motorola SG 2000 is the answer in a rapidly expanding global market.
Motorola Starline® SG4000 Scalable Modular Optical Node - The Motorola Starline SG4000 modular optical node provides operators with an unprecedented level of performance and flexibility. With provisions for up to nine optics modules, the Motorola SG4000 scales from its most basic version to full 4x4 capability without any loss of initial investment and with minimal service interruptions. Customers will benefit from its expandable, flexible configurations that allow station growth without any upfront price penalty. Featuring all new module designs, the Motorola SG4000 builds on Motorola's heritage of reliability and performance. As a platform for Motorola's high-speed Time Domain Multiplexed (TDM) digital return, the Motorola SG4000 effectively combines node segmentation with wavelength aggregation, conserving fiber resources. Available with a Hybrid Management Sub-Layer (HMS) compatible status monitor transponder, the SG4000 supports today's evolving HFC networks.
Olson OTMN-II
Olson OTMN-II Micronode II High Performance Optical Node - The Olson Technology OTMN-II is a high performance, four output, two way optical node with performance up to 870MHz. This unit also includes a power factor corrected switching power supply and transient protection on all external ports. The Olson Technology OTMN-II provides the ultimate in performance with +50dBmv output on all ports and a 3mW DFB return laser. Features and capabilities include optional redundant forward/return path operation; optional “Spectrum Multiplier” that doubles the return bandwidth; and optional use of the power port for return output or input signals. This unit is designed to be operated over the operating temperature range of -40°C to +65°C and the design incorporates the latest in GaAs amplifier technology
Olson LASERPLUS
Emcore 2801-2802
See: AC / DC
