Broadband RF Distribution
FIBER OPTIC Receivers
BROADBAND TRANSPORT
VL2240R
There are two versions of systems; 40 channel and 80 channel units. Both systems will receive CATV signals from 20 MHz to 860 MHz in bandwidth. TheVL2200/2300 series broadband systems are designed to be used in small to medium campus links, which can incorporate high split couplers. They will transport up to 80 VSB-AM video channels up to 30 km while maintaining good Carrier to Noise and Carrier to Distortion parameters. Only available in 1310 nm.
VL2280R
There are two versions of systems; 40 channel and 80 channel units. Both systems will receive CATV signals from 20 MHz to 860 MHz in bandwidth. TheVL2200/2300 series broadband systems are designed to be used in small to medium campus links, which can incorporate high split couplers. They will transport up to 80 VSB-AM video channels up to 30 km while maintaining good Carrier to Noise and Carrier to Distortion parameters. Only available in 1310 nm.
Blonder Tongue FRRA
Part # FRRA-S4A-860-43PA
Blonder Tongue FRRA Fiber Receiver & Distribution Amplifier - The Blonder Tongue FRRA is a fiber optic receiver module integrated with a rack mounted broadband distribution amplifier (RMDA). The Blonder Tongue FRRA is used as a launch amplifier in a coaxial distribution sub-system fed from a single mode broadband fiber network. The Blonder Tongue FRRA's optical receiver section provides exceptional CNR performance at low optical input levels. This feature is also a cost saving one, since it permits the use of lower optical power transmitters. The Blonder Tongue FRRA is available in two models with RF bandwidths of 550 MHz and 860 MHz.
Blonder Tongue FRDA
Part # FRDA-SA-860-43PA
Blonder Tongue FRDA Fiber Receiver Distribution Amplifier - The Blonder Tongue FRDA is a fiber optic receiver module integrated with a broadband distribution amplifier (BIDA). The Blonder Tongue FRDA is used as a launch amplifier in a coaxial distribution sub-system fed from a single mode broadband fiber network. The Blonder Tongue FRDA's optical receiver section provides exceptional CNR performance at low optical input levels
OTPN-1000
The OLSON TECHNOLOGY, INC. PremiseNode Model OTPN-1000 is a high-output, high-performance, full-featured CATV optical node designed around the very latest optical receiver technology to reliably deliver a full slate of multiplexed video, high speed data & telephony services in an HFC/PON fiber-to-the-premise (FTTP) environment.
OTOR-870
Olson Technology OTOR-870 Low Level Optical Receiver - The OLSON TECHNOLOGY INC. OTOR-870 Low Level Optical Receiver is optimized for those applications that require the ultimate in performance at low optical input levels. This receiver is designed for those “last mile” applications where optical power is at a premium. The unit operates from a single 5.2V supply and consumes less than 2.5 watts. Its push pull design from the detector to the output insures excellent CSO/CTB performance with full channel loading. External optical power monitor test points are available as is a power monitor connection to the power / interface connector. This feature in conjunction with the shut down feature allows for this unit to be utilized in redundant switching applications
OTPT-300A
OTPN-400
The Olson Technology Inc. OTPN-400 is a high quality, cost effective, bidirectional CATV node designed around the latest optical receiver technology. It is designed to operate with optical input levels ranging from -8dBm to -1dBm. The OTPN-400 operates with external +12 VDC either direct or up the coax with optional power inserter. An AC Power Adapter is also available for supplying +12VDC. Low power consumption, less than 5 Watts.
OTPN-12V Power supply for OTPN-400 fiber optic receiver.
OTOR-300
Model OTOR-300 cost effective CATV Return Path Receiver utilizes a new low-noise, impedance-matched, high-efficiency 1310/1550nm broadband photodiode and advanced RF amplification circuitry to facilitate carriage of critical downstream video, data, telephony and internet traffic in an HFC broadband environment.
Emcore 2808
Part # 2808R-SF-SP
The Force CATV Model 2808 110 Channel Private Network Solution (PNS)/Professional Distribution Solution (PDS) VSB/AM Fiber Optic Receiver, working with Model 2804 PDS or 2805 PNS transmitter, provides CATV distribution headend operators with an extensive array of features that offer a low-cost solution to increase system performance. The unit provides an RF output of +28 dBmV, allowing multiple RF splits without the use of an external RF amplifier.Emcore.
Emcore 2807
Emcore/Force 2807 CATV Receiver - The Emcore/Force CATVLinx Model 2807 Mini-node Optical Receiver, working with either the Emcore/Force Model 2804 PDS or 2805 PNS transmitter, provides CATV distribution headend operators with an extensive array of features that offer a low-cost solution to increase system performance. The unit provides an output of +38 dBmV of RF over the entire optical input range, allowing multiple RF splits without the use of an external RF amplifier. Additionally, the mini-node's ability to operate over a wide optical input range of -8 to +4.5 dBm allows for a variety of system designs without degrading performance
AMCP1315-H-110-42/54-FP
PBN AMCP1315 Broadband Optical Receiver - The PBN AMCP1315 optical receiver has been designed to receive and convert optical signals with wavelengths of either 1200 nm to 1600 nm to radio frequency (RF) signals of 45 MHz to 870 MHz. The plug-in return path laser modules and diplex filters provide an extremely versatile optical node capable of two-way optical communication. Suitable for CATV/MATV and CCTV applications, the PBN AMCP1315's compact size and superior optical and RF performance provides the ideal choice for indoor optical nodes.
See: AC / DC
