Signal Splitters / Signal Combiners

A Signal Splitter/Signal Combiner is defined as a transmission component which divides or sums power between two or more ports.

$CALL$

See Distribution panels

See Custom Built

5-1000 MHz 
1GHz CATV SOLDER BACK SPLITTER - (16-Way)

Part Number - 16W1GF

5-1000 MHz Only.

Not available in  5-2150 MHz See Custom and Rack Mount Please call.

4-Way Power Passive

Part Number - 4WHFS

5-2150MHz Wideband Splitters - All ports Power passive 4way

16way 5-2150 MHz

Part Number - 16RMPPS

Commercial Rack Mount and Custom Built High Frequency Splitters. 16 way All port power passive, 24 port, 32 port Splitter/ Combiner and custom configurations Diode steered. Please Call

Part Number - 2WHFS

5-2150MHz Wideband Splitters - All ports Power passive 2way

Part Number - 3WHFS

5-2150MHz Wideband Splitters - All ports Power passive 3way

Part Number - 4WHFS

5-2150MHz Wideband Splitters - All ports Power passive 4way

Part Number - 8WHFS

5-2150MHz Wideband Splitters - All ports Power passive 8way 

Fiber Optic Splitter

$CALL

We offer a complete family of Splitter/Coupler Modules. Select from 19" Rack Models, Wallmount Models, or Corning, Lucent, and ADC plug compatible models, including Corning Reduced Splice Tray models. Select 1x2 to 1x32 outputs with the wavelengths and insertion loss of your choice and with the optical splits you require.

ADC Compatible Splitter/Coupler Module

Lucent Compatible Splitter/Coupler Module with Rear Input

Wall Mountable Splitter/Coupler Module

Rack Mount Splitter/Coupler

DWDM's, EDFA's and Other Linear Bandwidth Applications Requiring Minimal Broadband dB Loss. singlemode Dual Wavelength 1310/1550 nm,1x5, 19" Rackmount module with input pigtails, output pigtails, standardgrade coupler using Corning SMF-28e fiber, SC connectors on the input, SC connectors on the output, input length 1 meter, and output length 2 meters.

Dual-Band Separator / Combiner 800-1900 MHz

Part Number - 859922

Description: Equal amounts of signal sent to two antennas for similarly sized areas Each output port loses 3 dB 800-900 MHz & 1850-1990 MHz bands (Cellular, iDEN & PCS) N-Female Connectors can connect two outside antennas to one Dual-Band amplifier or two amplifiers to one inside antenna.

5.8 GHz Signal Combiner 4way

Part Number - 584SPL

Description: 5.8 GHz Signal Splitters/Signal Combiners are available in 2-Way and 4-Way models. They feature N-Female connectors 

Hi / Lo UHF VHF separator/joiner

Hi-lo separator/joiner UHF VHF band separator-joiner, separates or joins UHF and VHF separate inputs to a single output. Or splits a single input to UHF/VHF outputs. Power passive to low band/VHF only

UHF VHF Band separator/joiner

Band separator/joiner UHF VHF band separator-joiner, separates or joins UHF and VHF separate inputs to a single output. Or splits a single input to UHF/VHF outputs. Power passive to low band/VHF only

Channel 3 Signal Combiner

CH3CMB

High-quality, 6-stage Bandpass & Bandstop Filters With Balancing Attenuators Combines Locally Originated Channel 4 Into An Existing MATV System Containing Adjacent Channels Low Insertion Loss High Unwanted Signal Attenuation 40 - 1000 MHz. Channel 3 - CH3CMB

Channel 4 Signal Combiner

CH4CMB

CH6CMB

High-quality, 6-stage Bandpass & Bandstop Filters With Balancing Attenuators Combines Locally Originated Channel 4 Into An Existing MATV System Containing Adjacent Channels Low Insertion Loss High Unwanted Signal Attenuation 40 - 1000 MHz. Channel 4 or 6 - CH4CMB

DIPLEXER

It separates or combines off-air TV-Antenna and Satellite signals from or onto a single coaxial cable.

Phone Connecting Block

connecting block enables you to quickly interconnect phone lines and communication cables.

CAT 5E & CAT 6E Patch Panels

CAT5E - 24 ports - 1.75”H x 19”W

CAT5E - 48 ports - 3.5”H x 19”W

CAT5E - 96 ports - 7”H x 19”W

CAT6 - 12 ports w/bracket

CAT6 - 24 ports

CAT6 - 48 ports

CAT 5E 12 Port Vert. Patch Panel

See: Modulators

See: Passives / Separators

See: Rack Mount

See: Enclosures