3 dB Attenuator

Part Number - 859935

Attenuates signal by 3 dB  N-Female Connectors
 

10 dB Attenuator

Part Number - 859926

Attenuates signal by 10 dB N-Female Connectors
 

6 dB Attenuator

Part Number - 859936

 
Attenuates signal by 3 dB N-Female Connectors
 

20 dB Attenuator

Part Number - 859927

Attenuates signal by 20 dB N-Female Connectors
 

75 ohm Attenuator F Type

Attenuator Pad value 1 dB

Attenuator Pad value 3 dB

Attenuator Pad value 6 dB

Attenuator Pad value 10 dB

Attenuator Pad value 20 dB

Please specify value. Any value 2.49 Attenuator Pad, RF Attenuators, Screw in-line with coax cable and reduce signal strength by rated amount. Try different combinations until you get the best picture quality. Use to balance signal strength from different sources. RF Attenuator pad

SC Attenuators Singlemode

Part # 720-Vaule 

Utilizing Siecor FDDI Plus Cable for Multimode assemblies and Siecor Premium Quality for Singlemode assemblies. We use Siecor, AT&T, Amp, IBM and JDS Fitel connectors

50 ohm Attenuator

TBNC20DB

TBNC10DB

TBNC6DB

TBNC3DB

Attenuator COAX BNC signals up to 1 GHz. Each attenuator has a male and a female BNC connector. used with a matched 50-ohm source and load. Please specify value

SC Attenuators Multimode

Part # 710-Vaule 

Utilizing Siecor FDDI Plus Cable for Multimode assemblies and Siecor Premium Quality for Singlemode assemblies. We use Siecor, AT&T, Amp, IBM and JDS Fitel connectors

RG59T

F Terminator 75 Ohms

25dB return loss for 5-2300MHz 75Ohm

RGP59T

F Terminator 75 Ohms

AC/DC Blocking type 20dB return loss for 5-2300MHz 75Ohm

50 ohm Feed-through Terminator

feedthrough attenuator is a coaxial terminator with BNC connectors. It is useful for connecting signals from 50-ohm sources into instruments with high-impedance inputs, such as oscilloscopes. DC to 1 GHz

Spaun 75 ohm DC Terminator

Part # ZFR75DC

To terminate the trunklines of multi-switches or the trunkline outputs

TERMINATOR, "F" 75 OHM, 10-2150 MHZ

BTF-BT

Blonder Tongue LTF2150 ZBTF-TP
1964 Terminator Male, Type "F", 75 Ohm LTF-2150 6439 Terminator, "F" 75 Ohm, 10-2150MHz, DC Blocking BTF-TP 4670 0-6 GHz 50 Ohm Type- N-Male Terminator

0-6 GHz 50 Ohm Type- N-Male Terminator wifi

N50T

SC/UPC Terminator

Part # FTSCUPC

Utilizing Siecor FDDI Plus Cable for Multimode assemblies and Siecor Premium Quality for Singlemode assemblies. We use Siecor, AT&T, Amp, IBM and JDS Fitel connectors

SC/APC Terminators

Part # FTSCAPC

Utilizing Siecor FDDI Plus Cable for Multimode assemblies and Siecor Premium Quality for Singlemode assemblies. We use Siecor, AT&T, Amp, IBM and JDS Fitel connectors

FC/APC Terminator

Part # FTFCAPC

Utilizing Siecor FDDI Plus Cable for Multimode assemblies and Siecor Premium Quality for Singlemode assemblies. We use Siecor, AT&T, Amp, IBM and JDS Fitel connectors

SC/APC 8° and SC/UPC Ultra Polish 

FC/APC 8º and FC/UPC Available

See: Connectors / Fittings

See: Amps