Wireless Cellular 50 dB Amplifier 824-894 MHz

Part Number - 801105

The Cellular 50 dB Amplifier improves signals on the Cellular (824-894 MHz)band and works with Verizon, US Cellular, Cellular One, Alltel, Bell Canada, Telus, Cingular and all other 800 MHz Cellular carriers.

Features: Works on all generations of CDMA, TDMA, GSM and high-speed data technologies. Improves data communication rates needed for 3G Automatic gain control up to 50 dB 2 dB gain step 30-50 dB Automatic gain adjusting in the event of oscillation and/or overload. Power control logic ensures maximum output power is within cellular network standards Gain indicator lights Automatic shutdown on overload FCC and IC type accepted

Wireless Dual-Band 50 dB Cellular/PCS Amplifier

800 MHz - 1900 MHz

Part Number - 801245

The Dual-Band SOHO Amplifier improves signals by 50 decibels in the Cellular (824-894 MHz) band and the PCS (1850-1990 MHz) band and works with Verizon, US Cellular, Cellular One, Alltel, Bell Canada, Telus, Cingular, Sprint, T-Mobile and all other Cellular and PCS carriers.

Features: Available Spring 2007 For 800 MHz Cellular and 1900 MHz PCS Bands. Works on all generations of CDMA, TDMA AND GSM. Automatic ain control to revent oscillation. Automatic shutdown on overload. Maximum +30 dBm output power. Receiver sensitivity -110 dBm CDMA 1% FER. AC power supply included. FCC and IC type accepted.

Wireless iDEN 50 dB Amplifier

806-821 MHz / 851-866 MHz

 Part Number - 804005

Features: For iDEN frequencies Automatic gain control up to 50 dB Approximately 2 dB gain step 30-50 dB Power control logic ensures maximum output power is within cellular network standards Automatic shutdown on overload Gain indicator lights Oscillation detection and gain reduction with auto reset intervals AC power supply included FCC and IC type accepted.

Wireless Cellular Single Band 824-849 MHz Amplifier 40 dBi

824-894 MHz

 Part Number - 801101

The Cellular Band Amplifier improves signals on the Cellular (824-894 MHz) band and works with Verizon, US Cellular, Alltel, Bell Canada, Telus and all other Cellular carriers.

Cellular/PCS Dual-Band 824-894MHz / 1850-1990MHz Amplifier 40dB

824-894 MHz / 1850-1990 MHz

Part Number - 801201

The Dual-Band Amplifier improves signals on both Cellular (824-894 MHz) and PCS (1850-1990 MHz) bands and works with Verizon, US Cellular, Cellular One, Alltel, Bell Canada, Telus, Cingular, Sprint, T-Mobile and all other Cellular and PCS carriers. Mobile Wireless Cellular/PCS Dual-Band 824-894MHz / 1850-1990MHz Amplifier

Wireless Mobile Amplifier Kit 40dB

824-894 MHz / 1850-1990 MHz

Part Number - 801212

Allows multiple phones and data cards to be used simultaneously Supports CDMA, TDMA, GSM and AMPS, in addition to 1x and 3x data protocols such as HSDPA, EVDO and EDGE. Requires no physical connection to cell phone or data card Increase your safety while driving and improve your cellular signal!

Wireless Amplifier Cradle Kit

40 dB / 45 dB

824-894 MHz / 1850-1990 MHz

Part Number - 801213

iDEN Single Band 806-821 MHz Amplifier 40dB

806-821 MHz

Part Number - 804002

The iDEN Band Amplifier improves signals on iDEN (806-866 MHz) band and works with Nextel, SouthernLINC or Mike (Canada) and all other iDEN carriers

Cellular/PCS Dual-Band 800/1900MHz Amplifier 40/45dB

824-894 MHz / 1850-1990 MHz

Part Number - 801230

Part Number - 801231

Mini-Mobile kit features the compact 801230 dual-band amplifier, the Cradle Plus interior antenna for hands-free cell phone operation, and our 12” magnet mount exterior antenna (301125). This popular kit installs in your vehicle in minutes, supports multiple users and both the 800MHz and 1900MHz carrier frequency bands

Wireless Dual-Band 50 dB Cellular/PCS Amplifier

800 MHz - 1900 MHz

Part Number - 801247

Plug-and-play kit boosts cellular signal in a single room. Wireless – no physical connection to cell phone or data card Amplifier features built-in inside antenna Outside antenna may be mounted outdoors on a pole or wall, or indoors on a window Supports multiple cell phones and data cards simultaneously Dual-Band: 800 and 1900 MHz

Complete package - everything you need is in the box Wireless operation - no connection to cell phone or data card Works in any inside location where proved cellular signal is needed: homes, offices, buildings Power control logic ensures maximum output power is within cellular standards Works on all generations of CDMA, TDMA and GSM FCC and IC type accepted.

.

SIGNALBOOST Cellular Amplifier Kit

Part Number - 811214

Increase your safety while driving and improve your cellular signal with Wilson's new Cell Phone Cradle Plus!  Works with all cell phones (except iDEN/Nextel) Supports CDMA, TDMA, GSM and AMPS, in addition to 1x and 3x data protocols such as HSDPA, EVDO and EDGE Up to 3 watts maximum output power Power control logic ensures maximum output power is within cellular standards Requires no physical connection to cell phone or data card Provides high signal-to-noise ratio protects cell sites from harmful interference Dual band - Cellular and PCS FCC and IC type accepted.

Single Band High-Power iDEN 806-869 MHz Amplifier 10dB

806-821 MHz Uplink, 851-866 MHz Downlink

Part Number - 814004

CANADA Maximum 5 watts output power on iDEN frequencies For use with Nextel,Southern Linc, Mike, and private iDEN systems Smart Technology ™ amplifies only on data stream to keep power consumption low Mobile, marine and in-building use Improves performance of phone-cradle systems External antenna and cell phone or cellular data card adapter is required (sold separately) FCC and IC type accepted. Puts the improved signal directly into your cell phone or cellular data card through a coaxial cable and adapter and gives you maximum signal performance for rural or remote locations. Each Direct Connection Amplifier System contains an amplifier, a 6-foot coaxial extension cable that connects to an external antenna adapter (not included), and a power cable that plugs into a 12-volt cigarette lighter adapter. You will also need at least one outside antenna and at least one length of coaxial cable to connect the antenna to the amplifier.

Single Band High-Power iDEN 806-869 MHz Amplifier 10dB

806-821 MHz, 851-869 MHz

Part Number - 814021

Maximum 5 watts output power on iDEN frequencies For use with Nextel,Southern Linc, Mike, and private iDEN systems Smart Technology ™ amplifies only on data stream to keep power consumption low Mobile, marine and in-building use Improves performance of phone-cradle systems External antenna and cell phone or cellular data card adapter is required (sold separately) FCC and IC type accepted

Wireless Single-Band 10 dB  Amplifier

824 MHz - 894 MHz

Part Number - 811101

The Single-Band Cellular Amplifier improves signals on the Cellular (824-894MHz) band and works with Verizon, US Cellular, Alltel, Bell Canada, Telus and other cellular carriers.

Wireless Dual-Band 10/14 dB  Amplifier

824 - 894 MHz 1850-1990 MHz

Part Number - 811201

The Dual-Band Cellular/PCS Amplifier improves signal on both Cellular(824-894 MHz) and PCS (1850-1990 MHz) bands and works with Verizon, US Cellular, Cellular One, Alltel, Bell Canada, Telus, Cingular, Sprint, T-Mobile and all other Cellular/PCS carriers. Pre-Amp

GSM Dual-Band 14 dB  Amplifier

824-894 MHz / 1850-1990 MHz

Part Number - 812201

The Dual-Band GSM Amplifier improves signals on both Cellular (824-894 MHz) and PCS (1850-1990 MHz) bands and works with Cingular, T-Mobile and all other GSM carriers. Pre-Amp, In-Line.

iDEN Single-Band 10 dB Amplifier

806 -866 MHz

Part Number - 814001

The iDEN Band Amplifier improves signals on iDEN (806-866 MHz) band and works with Nextel, SouthernLINC or Mike (Canada) and all other iDEN carriers. FME-Male 50 ohms

SIGNALBOOST™ Mobile and Home/Office Cellular/PCS Amplifier cell site controlled

824-894 MHz / 1850-1990 MHz

 Part Number - 811210

SIGNALBOOST™ Cellular/PCS Amplifier improves signals on both Cellular (824-894 MHz) and PCS (1850-1990 MHz) bands and works with Verizon, US Cellular, Cellular One, Alltel, Bell Canada, Telus, Cingular, Sprint, T-Mobile and all other Cellular and PCS carriers. No phone adapter required. Connects to all phones! Up to 10 times more power than your cell phone or laptop data card. In-Line 25db

SIGNALBOOST™ Mobile and Home/Office Cellular/PCS Amplifier Plug-and-Play Kit

824-894 MHz / 1850-1990 MHz

 Part Number - 811211

MiniMag. SIGNALBOOST™ Cellular/PCS Amplifier Plug-and-Play Kit improves signals on both Cellular (824-894 MHz) and PCS (1850-1990 MHz) bands and works with Verizon, US Cellular, Cellular One, Alltel, Bell Canada,Telus, Cingular, Sprint, T-Mobile and all other Cellular and PCS carriers. No phone adapter required. Connects to all phones!

Wireless Cellular 60 dB Amplifier

824-894 MHz

 Part Number - 801106

The Cellular 60 dB amplifier improves signals on the Cellular (824-894 MHz)band and works with Verizon, US Cellular, Cellular One, Alltel, Bell Canada, Telus, Cingular and all other Cellular carriers.

iDEN 60 dB amplifier

 Part Number - 804006

The iDEN 60 dB amplifier improves signals on the iDEN (806-866 MHz) band and works with Nextel, SouthernLINC, Mike (Canada) and all other iDEN carriers.

Wireless PCS 60 dB Amplifier 

1850-1990 MHz

 Part Number - 801306

The PCS 60 dB amplifier improves signals on the PCS (1850-1990 MHz) band and works with Cingular, Sprint, T-Mobile and all other PCS carriers

Part Number - 801240

See: Cell Phone Antennas

See: Connectors / Fittings

See: Cable and Wire