Satellite Switch Home
     About Satellite  |  Government  |  Custom Built  |  RX/TX  |  About Us  |  Contact Us                    
 

Multiswitch - Satellite Multi-Switch. Active Multi-Switches - Rack-Mounted satellite switch

 

The Largest Selection     Active Commercial Multi-Switch

 

 

 

      ANTENNAS

 

 

Wifi - Bluetooth
Cell / Mobile Phone
Special Application
Satellite / Parabolic
- Small Dish
- Medium Dish
- Large Dish
- Portable Dish
Dish Cover / Snow-Ice
Custom Built
UHF / VHF / FM

     AMPLIFIER

  Wifi - Bluetooth
Cell / Mobile Phone
Satellite / Parabolic
Custom Built
UHF/VHF - CATV - RF

      RECEIVERS

 

 

RF / Broadband Fiber
AV / Baseband Fiber
IF / L-Band Fiber
IRD / FTA and STB

      TRANSMITTERS

 

 

RF / Broadband Fiber
AV / Baseband Fiber
IF / L-Band Fiber
Misc.

      FEEDHORN

 

 

Tx/Rx Transmit Receive
Custom Built
Wave Guides
Satellite / Parabolic

       LNB's

 

 

Tx/Rx Transmit Receive
DBS / FTA / TVRO
PLL - Commercial
LNB - Bracket / Adaptor

       NETWORK

  IPTV
MODEMS
Routers / Switches
Hubs / Controllers
USB
Serial - RS232
PCi - COM
Wireless
Ethernet
Other IP Devices
Drivers
      ACCESSORIES
 

 

Enclosures
AC / DC
Engineering
Splitters / Dividers
Mounts & Hardware
Connectors / Fittings
Terminator / Attenuator
Meters & Scopes
Tools
Combiners / Joiners
Cable & Wire
Modulators
Covers & Heaters
Power Inserters
MultiSwitches
Motors & Positioners
IR - Infrared
CCTV / DVR’s
Grounding / Surge
Rack Mount
Channel Filter
Wall Plates
Satellite TELEPHONE
Misc. Products
     Helpful LINKs
 

 

Footprints
What Frequency
Latitude - Longitude
Phone Test Mode
Channels Transponders
Wifi Scanner
Satellite Chart
Dish Pointer
SATcalculator
Goodies
     GENERAL INFO
 

 

About Satellite
Archives
StoreCam
Home

 

 

    Track Fedex  Track UPS


Input: your comments and suggestions are always welcome.


 

Welcome to SatelliteDish.com  >> Catalog >> Accessories >> MultiSwitches

 >> MultiSwitches:-Wikipedia

 

MultiSwitches

A multiswitch system provides the simplest way to connect ALL of your satellite TV receivers if you have more than one. Connect Multiple Satellite Receivers to a Single Dish with our range of Satellite Multiswitches. Shop Our Huge Inventory of Multiswitches. 22KHz tone switch-Wikipedia DiSEqC Switch-Wikipedia IEEE Bands They can be used in every application requiring satellite distribution. 4, 8, 12, 16, 32, 64 and more receiver multiswitch - Satellite Multi-Switch. Multi-Switches - Rack-Mounted satellite switch-Wikipedia We also offer redundancy Switching for RF-Wikipedia IF-Wikipedia, L-Band-Wikipedia LTE-Wikipedia DC to 38GHz. Power 16 Output and 5 input switch. DirecTV - SWM stands for "single-wire multiswitch"

Satellite Multi-Switch - DiSEqC - 5x16 - SWM - Rack Mount - Power supply - 3x4 - 4x8 - Satellite Switch - Multi Satellite


 

 

3x4 Multi-Switch

3x4 Multi-Switch

$59.00

Description: Economical high quality solution for multiple receiver configuration  Combine terrestrial UHF/VHF signals with satellite I.F. For distribution on one cable.

EA3X4S Data Sheet

 

 

4x8 Multi-Switch

4x8 Multi-Switch

$89.99

Description: Economical high quality solution for multiple receiver configuration. 2 satellite in and 8 receiver out.

EA4X8S Data Sheet

 

 

 

 

All You Need

3x4 Multi-Switch

$59.99

Description: Better, high quality solution for multiple receiver configuration • Combine terrestrial UHF/VHF signals with satellite I.F. For distribution on one cable. •  Utilizes state of the art Pin Diode signal switching. •  Manufactured with Surface Mount Technology, this allows for excellent Thru Loss, Return Loss. 3 x 4 multi switch.

SB3X4S Data Sheet

 

 

 

Dish LNB Switch

3x8 Soldered Back 

$59.00

Description: High quality solution for multiple receiver configuration • Combine terrestrial UHF/VHF signals with satellite I.F. For distribution on one cable. •  Utilizes state of the art Pin Diode signal switching. •  Manufactured with Surface Mount Technology, this allows for excellent Thru Loss, Return Loss. 3 x 8 multi switch.

SB3X8S Data Sheet

 

 

 

Dish Switch - Call Today - 5x16 switch and More...

4x8 Switch w/ Power supply

$89.99

Description: DIRECTV Approved This 4x8 multi-switch is specially designed to optimally interface with all DIRECTV & DIRECTV plus. Triples - Comes with power supply. This multi-switch is sealed so it can be used either indoors or outdoors

EAS4X8S Data Sheet.

 

 

 

Slimline and more Dish Switch

6x8 Switch Flexport

$89.99

Description: DIRECTV 6X8 KA/KU Satellite Multi Switch DIRECTV Approved Wide Band Frequency Zinwell. Works with any type of LNB 6x8 multiswitch was designed to interface with 101/110/119W satellites plus additional inputs (2), Flex port 1 and Flexport 2. Flexports are used to interface with new DirecTV satellites such as 95 W and 72.5W.

Z6X8KAKU Data Sheet

 

 

 

 DirecTV Parts

DirecTV-Wikipedia

A DirecTV SWM Switch takes all four outputs from a satellite dish, and produces a single output, which can be divided up with splitters. The benefit of this system is only having to run one line to a DVR, which normally requires two lines. It also allows for a distribution with splitters, similar to how cable TV is setup.


 

 

 

 SWM-8 Single-wire Switch and Power Inserter

 SWM-8 Single-wire Switch and Power Inserter

$89.99

Description: DIRECTV Approved the SWM8 is a single-wire multiswitch that can control up to 8 DIRECTV satellite tuners. That means a single SWM8 can control up to 4 DVRs total (2 tuners per DVR), up to 8 single-tuner receivers total, or a combination (eg. 2 DVRs and 4 single-tuner receivers)

SWM-8 Data Sheet.

 

 

 

 

DIRECTV SWM16 Single-wire Switch and Power Inserter

SWM-16 Single-wire Switch and Power Inserter

$149.00

Description: DIRECTV SWM 16 Single-wire multi-switch and DIRECTV approved power inserter. Contains four legacy ports and two SWM ports. Each SWM port can power up to 8 tuners

SWM-16 Data Sheet.

 

 

 

SWM32 and two required Power Supplies

SWM32 and two required Power Supplies

$599.99

Description: DIRECTV SWM 32 Single-wire multi-switch and two DIRECTV-approved power supplies. Contains 4 outputs, each of which powers up to 8 tuners

SWM-32 Data Sheet.

 

 

 

Winegard SWM-840 Switch Kit

Winegard SWM-840 Switch Kit DirecTV SWM Kit

$199.98

Description: Allows the use of DIRECTV single wire multi-switch only (SWM) receivers with non-SWM Winegard mobile satellite TV antennas, portable and roof mount. Lets you watch programming on up to four TVs at the same time. Kit includes SWM-8 switch, power inserter, 4-way splitter and mounting hardware. tuners

SWM-840 Data Sheet

 

 

COM3000

COM3000 solution

Description: The COM3000 offers up to 138 channels of HD video and integrated Edge QAMs in only 3RU of rack space.This compact design also results in dramatic power savings compared to typical stacked receiver solutions.

COM3000 Data Sheet

 

COM2000

COM2000 Satellite Headend Solution

Description: The COM2000 offers up to 48 channels of HD or SD video reception and two integrated EdgeQAM’s in only 3 units of rack space. This compact design also results in dramatic power savings from typical stacked receiver solutions

COM2000 Data Sheet

 

C3K Blade

COM400

Description: The COM400 includes an integrated 10 Gigabit Ethernet backplane with two 1 Gigabit and two 10 Gigabit Ethernet ports available on the front panel. It contains two slots for up to two QAM20s to be inserted, for a maximum of up to 96 QAM channels; and six receiver slots, for up to a total of 138 DIRECTV HD streams, utilizing the COM51 receiver blades and SWCOM51 tuner licenses.

COM400 Data Sheet

 

 

 

 

 

COM51

Description: Commercial market, COM51 adds a new level of density capable of tuning up to 23 high-definition channels as well as capable of tuning DIRECTV 4K content and outputting this content over IP with either Zenith Pro:Idiom™ or Pro:Idiom Mobile™ content protection for HD and 4K broadcasts. The IP output can either be aggregated and distributed using an existing IP network, or it can be sent to the integrated QAM20. The COM51 can also simultaneously send it’s channel streams to an IP network and QAM without the need for duplicating channels.

COM51 Data Sheet

 

 

DSWM30 Switch

Description: DSWM30 Standard DSWM30SR0-01 OM51 tuner licenses DTV DRE Power Inserter/Polarity Locker DTV6PWRPOL-02 Amp Satellite DTV D2 STA-R0-0 SWM-EXPNDR-P-R0-09 & License for COM51 C3K Blade

CDSWM30SR0-01 Data Sheet

DirecTV commercial system layout and design call today. Commercial Entertainment Systems 

HD 50 channels, 138 channels, 276 Channels and other custom channel layouts QAM and IPTV solutions, Ready to install Plug and Play Designs. Complete turnkey rack modules for easy installation. 

 

COMMERCIAL VIDEO SOLUTIONS - DirecTV commercial system layout and design COM3000, Chassis, COM400, Edge QAM, QAM20, Receiver Blade, COM51, UCW4026MCS, COM2000, COM46, QAM6, COM1000, COM200, COM24, FLX

 

 

 

DSWM30 Expander

Description: DSWM30 Standard DSWM30SR0-01 OM51 tuner licenses DTV DRE Power Inserter/Polarity Locker DTV6PWRPOL-02 Amp Satellite DTV D2 STA-R0-0 SWM-EXPNDR-P-R0-09 & License for COM51 C3K Blade

SWM-EXPNDR-P-R0-09 Data Sheet

DirecTV commercial system layout and design call today. Commercial Entertainment Systems 

HD 50 channels, 138 channels, 276 Channels and other custom channel layouts QAM and IPTV solutions, Ready to install Plug and Play Designs. Complete turnkey rack modules for easy installation. 

 

COMMERCIAL VIDEO SOLUTIONS - DirecTV commercial system layout and design COM3000, Chassis, COM400, Edge QAM, QAM20, Receiver Blade, COM51, UCW4026MCS, COM2000, COM46, QAM6, COM1000, COM200, COM24, FLX

 

 

 

 

 

 

RCP2-1200 Redundant Controller LNB CONTROLLER

RCP2-1200 Redundant Controller LNB CONTROLLER

$1,200.00

Description: Teledyne Paradise Datacom can provide dual 1:1 redundant systems, 1:2 redundant systems, and a wide variety of custom systems. The outdoor equipment consists of the switch plate assembly and the Low Noise Block Down Converters and associated components. The controller provides complete visual indication of switch position, fault detection, and system status.

RCP2-1100 Controller Data Sheet
RCP2-1200 Controller Data Sheet

 

 

General Dynamics LRC-1000 C Band Redundant LNA System

General Dynamics LRC-1000 C Band Redundant LNA System

$3,595.00

Description: The General Dynamics LRC-1000 Series Redundant LNA systems minimize system downtime due to LNA failure by providing a spare LNA and an automatic means of switching to the spare upon failure of a primary LNA. A 1:1 system provides one spare LNA for one primary LNA. A 1:2 system provides a spare LNA for either of two primary LNAs. The systems consist of an outdoor plate assembly which mounts at the antenna hub, an indoor control panel and interconnecting control cable

LCR-1000 Data Sheet

 

 

6 x 16 Wide-band Satellite signal multiswitch

Zinwell Wide Band 6x16 Multiswitch

$259.00

Description: 16 Outputs For The Ka/Ku Dish Antenna / Reads Satellites Ka 99-103 And Ku 101, 110, 119 / Flexport for the New DIRECTV Satellites Such As 95W And 72.5W

Z6X16SWM Data Sheet

 

 

 

Norsat UNIVERSAL LNB CONTROLLER 

Norsat Universal  LNB Controller 

$1,299.00

Description: Universal LNB / LNA Redundancy Controller. Key Features: Monitor the status of two LNB / LNA units. Operate in automatic. Redundant system utilizes the RCP2-1100 redundant controller to provide fault detection and switchover in the event of a LNB / LNA failure.

RCP2BRS Data Sheet.

a

 

 

 

Redundant LNA systems are the field-proven low noise amplifier product lines. Available in all common C-, X- and Ku-Band frequencies, and offering state-of-the-art noise temperature performance, these LNAs can be configured for use in 1:1, 1:2 and custom redundant systems.


 

Teledyne Paradise Datacom Ku-Band 1:2 Redundant LNA System

$CALL

Description: Available in all common Ku-Band frequencies, and offering state-of-the-art noise temperature performance, these LNAs can be configured for use in 1:1, 1:2 and custom redundant systems. System monitoring and control is provided through the microprocessor-based RCP2-1100 and RCP2-1200 redundant system controllers.

1:2 Ku-Band Redundant Data Sheet

 

 

 

Teledyne Paradise Datacom Ku-Band 1:1 Redundant LNA System

$CALL  

Description: Available in all common Ku-Band frequencies, and offering state-of-the-art noise temperature performance, these LNAs can be configured for use in 1:1, 1:2 and custom redundant systems. System monitoring and control is provided through the microprocessor-based RCP2-1100 and RCP2-1200 redundant system controllers.

1:1 Ku-Band Redundant Data Sheet

 

 

 

Teledyne Paradise Datacom C-Band 1:1 Redundant LNA System

$CALL

Description: At the heart of all Teledyne Paradise Datacom redundant LNA systems are the field-proven low noise amplifier product lines. Available in all common C-Band frequencies, and offering state-of-the-art noise temperature performance, these LNAs can be configured for use in 1:1, 1:2 and custom redundant systems. System monitoring and control is provided through the microprocessor-based RCP2-1100 and RCP2-1200 redundant system controllers. LNA plate assemblies are designed for convenient integration into any antenna hub or facility with RF and user interfaces readily accessible. Common feed interfaces are offered as standard and isolation is provided at all RF interfaces. A range of RF hardware options and custom plate configurations are offered to meet specific system requirements.

1:1 C-Band Redundant Data Sheet

 

 

Teledyne Paradise Datacom C-Band 1:2 Redundant LNA System

$CALL

Description: At the heart of all Teledyne Paradise Datacom redundant LNA systems are the field-proven low noise amplifier product lines. Available in all common C-Band frequencies, and offering state-of-the-art noise temperature performance, these LNAs can be configured for use in 1:1, 1:2 and custom redundant systems. System monitoring and control is provided through the microprocessor-based RCP2-1100 and RCP2-1200 redundant system controllers. LNA plate assemblies are designed for convenient integration into any antenna hub or facility with RF and user interfaces readily accessible. Common feed interfaces are offered as standard and isolation is provided at all RF interfaces. A range of RF hardware options and custom plate configurations are offered to meet specific system requirements.

1:2 C-Band Redundant Data Sheet

 

See: Hubs / Controllers See: Feedhorn - Satellite / Parabolic
See: Routers / Switches See: Motors & Positioners

 

 

 

4 x 16 way switch

2x12 Multi-Switch

$169.99

Description: 2 inputs to 12 independent outputs Excellent for SMATV headends, as well as multi-room satellite only distribution. F- ports all face in the same direction for installation versatility and ease of use.

PM2X12 Data Sheet.

 

 

 

16 way DirecTV multiswitch 5x16

5 in 16 out Multi-Switch

$269.99

Description: This is a 22KHz control Multi-Switch which works with Voltage from receivers. This design allows the reception of satellites from 2 or 3 orbital slots using multiple LNB in a residential or small SMATV applications. This model has a F-port power if extra power is needed. 5 inputs consist of: 1 x U/V ANT  2 X 13/18V  2 X 22KHz 13/118V  

ACM5X16 Data Sheet.

 

 

 

 

 

Satellite USA WBS41202

Satellite USA Multi-Switch

$499.98

Description: Satellite USA WBS41202NF 12 Way Multiswitch for a 5 LNB DirecTV System. For use with DirecTV's new 5 LNB satellite dish. Will distribute up to 12 independent satellite receivers Outdoor mountable. Multiswitch will also work on DirecTV's older style satellite dishes and satellite receivers Remote power able via power port.

WBS41202 Data Sheet.

 

 

 

DirecTV 5 LNB TAP WBT410

Satellite USA WBT 410 DC Tap

$99.98

Description: Tap off a system backbone and create multiple distribution options. DirecTV 5 LNB Tap

WTB-410 Data Sheet.

 

 

See: AC / DC See: Splitters / Diplexer
 

 

Rack Mount Satellite Multi Switch 

ack-Mounted satellite switch-Wikipedia We also offer redundancy Switching for RF-Wikipedia IF-Wikipedia, L-Band-Wikipedia LTE-Wikipedia DC to 38GHz. Power 16 Output and 5 input switch. DirecTV - SWM stands for "single-wire multiswitch"

Multi-Switch


 

Rack Mount Satellite LNB Switch

 

 

 

Multi Dish Switch 

2x8 Rack Mountable Multi-switch

$234.00

Description: We Also have Active Splitters for providing power to the LNBs or Rack Mount In-Line Amps / Power Inserters. 

TSMS-2150-4 Data Sheet.
TSMS 2150-4a Data Sheet.
TSMS-2150x-16 Data Sheet.

 

 

2x12 Rack Mountable Multi-switch

2x12 Rack Mountable Multi-switch

$299.98

Description: We Also have Active Splitters for providing power to the LNBs or Rack Mount In-Line Amps / Power Inserters.

2x12 Rack Mount Switch Data Sheet.
3x12 Rack Mount Switch Data Sheet.
4x12 Rack Mount Switch Data Sheet.
5x12 Rack Mount switch Data Sheet.

 

 

 

2x16 Rack Mountable Multi-switc

2x16 Rack Mountable Multi-switch

$349.98

Description: We Also have 5x16 and 3x16 please call. Active Splitters for providing power to the LNBs or Rack Mount In-Line Amps / Power Inserters.

2x16 Rack Mount Switch Data Sheet
3x16 Rack Mount Switch Data Sheet
4x16 Rack Mount Switch Data Sheet
5x16 Rack Mount Switch Data Sheet

 

 

4x8 Rack Mountable Multi-switch

4X8 Rack Mountable Multi-switch

$299.99

Description: We Also have Active Splitters for providing power to the LNBs or Rack Mount In-Line Amps / Power Inserters. 

TSMS-2150-4 Data Sheet 
TSMS 2150-4a
Data Sheet
TSMS-2150x-16
Data Sheet

 

 

 

4x12 Rack Mountable Multi-switch

4x12 Rack Mountable Multi-switch

$349.98

Description: We Also have Active Splitters for providing power to the LNBs or Rack Mount In-Line Amps / Power Inserters. 

TSMS-2150-4 Data Sheet
TSMS 2150-4a
Data Sheet
TSMS-2150x-16
Data Sheet

 

 

 

 

 

4x16 Rack Mountable Multi-switch

4X16 Rack Mountable Multi-switch

$399.98

Description: We Also have 5x16 and 3x16 please call. Active Splitters for providing power to the LNBs or Rack Mount In-Line Amps / Power Inserters. 

2x16 Rack Mount Switch Data Sheet
3x16 Rack Mount Switch Data Sheet
4x16 Rack Mount Switch Data Sheet
5x16 Rack Mount Switch Data Sheet

 

 

DiSEq & DiSEqC Switch 

22KHz tone switch-Wikipedia DiSEqC Switch-Wikipedia IEEE Bands They can be used in every application requiring satellite distribution. 4, 8, 12, 16, 32, 64 and more receiver multiswitch - Satellite Multi-Switch. Multi-Switches - Rack-Mounted satellite switch-Wikipedia  

Multi-Dish Switches


 

Cascading Multiswitch with Power Supply

Cascading Multiswitch with Power Supply

$299.99

Description: 4 Dish inputs (That's four dual LNB in ) plus a input for Cable or local antenna UHF/VHF . Has output for 8 Eight receivers. Cascading 9 outputs for another switch if necessary. Switching commands compatible 13V,18V,13V/22KHz18V/22KHz DiSEqC2.0

CCMSPS Data Sheet

 

 

13in and 12 rec output  Call Today

13 in 12 out Cascading Multiswitch with power supply

$399.00

Description: Compatible with all Dishpro LNBFs and FTA satellite Systems. Perfect for 6 Dish in (that's Six dual LNB in) plus locale UHF/VHF or Cable CATV input with the output good for 12 receivers. It has 13 going over to another switch if necessary. Cascadable DiSEqC Switching commands compatible 13V,18V, 13V/22KHz 18V/22KHz DiSEqC2.0 

13x12SMS Data Sheet

 

 

 

17x17x16 Switch

17x17x16 

$499.00

Description: Compatible with all Dishpro LNBFs and FTA satellite Systems. Perfect for 8 Dish in (that's Eight dual LNB in) plus locale UHF/VHF or Cable CATV input with the output good for 16 receivers. It has 17 going over to another switch if necessary. Cascadable DiSEqC Switching commands compatible 13V, 18V, 13V/22KHz 18V/22KHz DiSEqC2.0  

17X17X16 Data Sheet

 

 

Spaun DiSEqC 1.0 Switch

Spaun DiSEqC 1.0    2x1

$74.00

Description: Spaun DiSEqC 1.0 Switch 2 Satellite / LNB Reception.

DiSEqC2.0 2x1 Data Sheet
DiSEqC2.0 3x1
Data Sheet
DiSEqC2.0 5x1
Data Sheet
DiSEqC2.0 4x4
Data Sheet
DiSEqC2.0 5x4
Data Sheet
DiSEqC2.0 5x6
Data Sheet
DiSEqC2.0 5x8
Data Sheet

 

 

 

DiSEqC 1.0 Switch

DiSEqC 1.0 Switch

$6.99

Description: Economy 2x1 DiSEqC 1.0 Switch
connect up to 2 satellite dishes (LNB's) to your FTA receiver.

DISEQC-S1 Data Sheet

 

 

DiSEqC1.0 switch

DiSEqC 1.0 Switch

$12.99

Description: Pansat 4x1 DiSEqC 1.0 Switch
connect up to 4 satellite dishes (LNB's) to your FTA receiver.

PANDISEQC1 Data Sheet

 

 

 

 

 

Pansat Multi Dish Switch

DiSEqC 1.1 Switch

$14.99

Description: Pansat 4x1 DiSEqC 1.1 Switch
connect up to 4 satellite dishes (LNB's) to your FTA receiver.

PANDISEQC11 Data Sheet

 

 

 

 

 

Pansat USA Multi Dish

DiSEqC 2.0 Switch

$19.99

Description: Pansat 4x1 DiSEqC 2.0 Switch connect up to 4 satellite dishes (LNB's) to your DVB FTA receiver.

PANDISEQC2 Data Sheet

 

 

 

Spaun Switch 5x8

Spaun DiSEqC 2.0    4x1

$134.00

Description: Spaun DiSEqC 2.0 Switch 2 Satellite / LNB Reception.

SPAUN-DISEQC-2 Data Sheet

 

 

 

 

Dish Spaun Multi

Spaun DiSEqC 1.0

$189.00

Description: 5x1 (Two satellite, one receiver, one UHF/CATV) 5x4 (Two satellite, four receiver, one UHF/CATV) 5x6 (Two satellite, six receiver, one UHF/CATV)

SPAUN-DISEQC-1 Data Sheet

 


 

22Khz Tone Switch

2x4 Satellite 22Khz Switch

$34.99

4 x 4 Satellite 22Khz Switch

$39.99

Description: 22KHz Tone-Controlled Auto Switch. DirecTV, DVB, 4DTV Compatible. Switches between two separate LNB feeds on the same or separate dishes. Used in signal routing in DSS, Ku, C, digital and analog environments

EA2X4-22KS Data Sheet

 

 

 

 

 

2x1 22khz Switch Dish Multi

2x1  22Khz Switch

$14.99

Description: 22KHz Tone-Controlled Auto Switch. DirecTV, DVB, 4DTV Compatible.

SPAUN-DISEQC-2X1 Data Sheet

 

 

Dish Network Parts

Dish Network-Wikipedia

Dish Network (often stylized as DISH Network) is an American direct-broadcast satellite service provider. The company provides satellite television, satellite Internet access, audio programming, and interactive television services to commercial and residential customers in the United States. As of November 2016, the company provided services to 13.7 million television and 580,000 broadband subscribers.


 

Dish Network SW-21 Switch


SW21 Multi-Dish Switch

$27.99

Description: Combines signals from any two Dish Network Satellites (61.5°, 110°, 119°).  Also, can be used in conjunction with a "Legacy" Twin LNBF and a "Legacy" dual LNBF to capture signals from ALL THREE SATELLITES.  1/2" Precision Machined F-Connector Threads.  Epoxy-Sealed Back-Cover Anti-Corrosion Chromate Zinc-Alloy Die-Cast Housing. 

SW-21 Data Sheet

 

 

 

 

Dish Network DP-21 Switch

Dishpro DP21     

$34.99

Description: Multiswitch 21 KHz for Dish Network receivers and two dish antennas, any model. Provides satellite signals from multiple Dishes. complete your installation using a second dish antenna

DP-21 Data Sheet

 

 

 

 

 

Dish Network Dishpro SW34 DP34

Dishpro DP34 Switch

$134.99

Description: Dish Network DP34 switch. Please call on latest Flex LNBF's and / or Flex Port Dish Network Switches.

DP-34 Data Sheet

 

 

DPP34 and DPP44 Switch

 Dish Network DishPRO Plus DPP44

$169.99

Description: 4x4 Multiswitch & Power Inserter. DISH Pro Plus 44 Switch features DISH Pro Plus Technology, LNBF inputs supporting four orbital locations, four receiver outputs, expansion ports to connect additional switches, and a power inserter.

DPP-44 Data Sheet

 

 

 

 

Dish Network DP44 switch

DP44 Switch

$199.99

Description: The DISH Pro Plus 44 Switch features DISH Pro Plus Technology, LNBF inputs supporting four orbital locations, four receiver outputs, trunk able ports to connect additional switches, and a power inserter.

DP-44 Data Sheet

 

 

 

 

 

Flex Switch Flex Port Multi

Flex34 

$165.00

Description: Four inputs for use with up to four orbital locations. Four outputs for connection to up to four independent inputs. Passive "trunk" connections, to cascade to another flex34 Switch.  Does not require power insertion. Can be used indoors or outdoors. Off-Air input is HDTV & Flex compatible

FLEX-34 Data Sheet

 

 

 

 

 

SW64 Switch Dish Network

DISH NETWORK SW64 Switch   

$139.99

Description: The SW-64 or 44 is more than a Multi-switch. They are both designed to work with the Dish Network logic built into your receiver.

SW-64 Data Sheet 

 

 

 

 

 

C Ku Switch - HV switch

2 X1 C-Ku Switch

$59.00

Description: Power passing, 0/5v OR 0/12V switch Use it to connect 2 separate LNBs (or 2 dishes) that lead into one receiver unit. Can be used with most MPEG FTA DVB receivers with 0/12V output. FREQUENCY INSERTION: 900-2150mhz LOSS (dB): 3 ISOLATION (dB): 20 RETURN LOSS (dB): 10 OPERATION VOLTAGE: 12VDC

CKU-SWITCH Data Sheet

 

 

 

 

Spaun Spawn Satellite USA

Spaun 5x6 Multiswitch

$599.00

Description: HDTV compatible. SAT-IF with slope. Terrestrial push-pull. DUO-SAT system. IF Polarity selection is controlled by remote voltage, <14.5vV,>16vH & the 22kHz tone provided by the receiver. Synchronous level for SAT 0...-10dB. Return path compatible. Current consumption 40 mA. Power consumption 26 Watts.

SMS 5602NF Data Sheet

 

 

 

 

 

Spaun ka ku sitch - Slimline 5x 8 Multiswitch

Spaun 5x8 Multiswitch

$599.00

Description: HDTV compatible. SAT-IF with slope. Terrestrial push-pull. DUO-SAT system. IF Polarity selection is controlled by remote voltage, <14.5vV,>16vH & the 22kHz tone provided by the receiver. Synchronous level for SAT 0...-10dB. Return path compatible. Current consumption 40 mA. Power consumption 26 Watts.

SMS 5802NF Data Sheet

 

 

 

 

 

spaun satellite USA Dealer

Spaun 5x16 Multiswitch

$1,195.00

Description: HDTV compatible. SAT-IF with slope. Terrestrial push-pull. DUO-SAT system. IF Polarity selection is controlled by remote voltage, <14.5vV,>16vH & the 22kHz tone provided by the receiver. Synchronous level for SAT 0...-10dB. Return path compatible. Current consumption   40 mA. Power consumption 26 Watts. 

SMS 51602NF Data Sheet

 

 

 

 

SAT Multi-Switch

3 In 4 Out Powered w/ VHF/UHF Amplifier

$499.00

Description: Combines a cable carrying VHF/UHF signals (from an antenna or CATV) with both cables from a dual LNB DSS satellite dish. Outputs for up to four runs to satellite receiver boxes.  Powered by internal AC power supply. Powers satellite dish directly. Built-in amplifier for DSS signals. Built-in amplifier for VHF/UHF or CATV signals. Adjustable gain, up to 8db! SEW121 diplexer Requires below at each receiver.

SMS3403NF Data Sheet

 

 

 

 

 

SAT LNB Switch

3 In 6 Out Powered w/ VHF/UHF Amplifier

$599.99

Description: Combines a cable carrying VHF/UHF signals (from an antenna or CATV) with both cables from a dual LNB DSS satellite dish. Outputs for up to four runs to satellite receiver boxes. Powered by internal AC power supply. Powers satellite dish directly. Built-in amplifier for DSS signals. Built-in amplifier for VHF/UHF or CATV signals. Adjustable gain, up to 8db! SEW121 diplexer Requires below at each receiver.

SMS3603NF Data Sheet

 

 

 

 

 

SMS 3403 NF

 3 In 8 Out Powered, w/ VHF/UHF Amplifier

$699.99

Description: Combines a cable carrying VHF/UHF signals (from an antenna or CATV) with both cables from a dual LNB DSS satellite dish. Outputs for up to four runs to satellite receiver boxes.  Powered by internal AC power supply. Powers satellite dish directly. Built-in amplifier for DSS signals. Built-in amplifier for VHF/UHF or CATV signals. Adjustable gain, up to 8dB! SEW121 diplexer Requires below at each receiver.

SMS3803NF Data Sheet

 

 

 

 

 

Spaun 5x 12 Multiswitch

Spaun 5x12 Multiswitch

$799.99

5 In 16 Out Powered w/ VHF/UHF Amplifier

$1,399.00

Description: HDTV compatible. SAT-IF with slope. Terrestrial push-pull. DUO-SAT system. IF Polarity selection is controlled by remote voltage, <14.5vV,>16vH & the 22kHz tone provided by the receiver. Synchronous level for SAT 0...-10dB. Return path compatible. Current consumption 40 mA. Power consumption 26 Watts.

SMS51202NF Data Sheet

 

 

 

Spaun Satellite multi Dish Switch

Spaun SMS 2212F

$499.00

Description: The insulated power supply easily connects up to 4 to 8 receivers to an LNB. It requires a coax cable to each receiver. The 110 V powered versions are: SMS 3404, SMS 3603, and SMS 3805.

SMS3404 Data Sheet
SMS3603
Data Sheet
SMS3805
Data Sheet

 

 

 

spaun dish switch

Spaun SMS 261F

$359.00

Description: Connect up to 6 receivers with this high quality Cascadable multiswitch from SPAUN

SMS241F Data Sheet
SMS261F
Data Sheet
SMS381F
Data Sheet


 

The Largest Selection - Spaun And Satellite USA. please call for latest pricing.

 

See: UHF / VHF Antennas See: AC / DC
See: Splitters / Dividers See: Modulators
 

3x4, 3x8, 2x12, 2x16, Rack Mount 2x16 3x12, 3x16, 4x4, 4x8, 4x12, 4x16, 5x4, 5x8, 5x12, 5x16, 6x8, 6x16, 13x13x12, 17x17x16, SWM 16, SWiM 32, DP44, DP21, SW21, SW34, DP32, S2X6, Hub, DP33, SW64, 22KHz, DiSEqC, Multi, Switch, input, output, Receivers. Switches automatically - Switch between two or more LNBs allowing reception from multiple satellites. Multi Receiver Switch - Satellite Multi Switch-Wikipedia

Active 5x16 Output Powered Multiswitch

 

POWER 4, 8, 12, 16, 32, 64 or more receivers - Redundancy Switching for RF, IF, L-Band, LTE, DC to 38GHz
 HOME About Satellite | Government | Custom Built | RX/TX | About Us | Contact Us                          Call Today:  (954) 941-8883 
Copyright © 1995-2016 SatelliteDish.com All Rights Reserved.