Satellite Parts  Home - Monopulse Comparator and Waveguides
     About Satellite  |  Government  |  Custom Built  |  RX/TX  |  About Us  |  Contact Us                    
 

Flexible RF Waveguides: Flexible Waveguide Rubber Pressure Jackets. WR-62  flexguide, rotary joints custom wg, terminations, couplers

 

The Largest Selection    16094-NF | WR90 to N-Female Waveguide Adapter X-Band WR90 Waveguide Variable Attenuator - Adapters, Attenuators, Balanced Mixers, Bias Tees

 

 

 

      ANTENNAS

 

 

Wifi - Bluetooth
Cell / Mobile Phone
Special Application
Satellite / Parabolic
- Small Dish
- Medium Dish
- Large Dish
- Portable Dish
Dish Cover / Snow-Ice
Custom Built
UHF / VHF / FM

     AMPLIFIER

  Wifi - Bluetooth
Cell / Mobile Phone
Satellite / Parabolic
Custom Built
UHF/VHF - CATV - RF

      RECEIVERS

 

 

RF / Broadband Fiber
AV / Baseband Fiber
IF / L-Band Fiber
IRD / FTA and STB

      TRANSMITTERS

 

 

RF / Broadband Fiber
AV / Baseband Fiber
IF / L-Band Fiber
Misc.

      FEEDHORN

 

 

Tx/Rx Transmit Receive
Custom Built
Wave Guides
Satellite / Parabolic

       LNB's

 

 

Tx/Rx Transmit Receive
DBS / FTA / TVRO
PLL - Commercial
LNB - Bracket / Adaptor

       NETWORK

  IPTV
MODEMS
Routers / Switches
Hubs / Controllers
USB
Serial - RS232
PCi - COM
Wireless
Ethernet
Other IP Devices
Drivers
      ACCESSORIES
 

 

Enclosures
AC / DC
Engineering
Splitters / Dividers
Mounts & Hardware
Connectors / Fittings
Terminator / Attenuator
Meters & Scopes
Tools
Combiners / Joiners
Cable & Wire
Modulators
Covers & Heaters
Power Inserters
MultiSwitches
Motors & Positioners
IR - Infrared
CCTV / DVR’s
Grounding / Surge
Rack Mount
Channel Filter
Wall Plates
Satellite TELEPHONE
Misc. Products
     Helpful LINKs
 

 

Footprints
What Frequency
Latitude - Longitude
Phone Test Mode
Channels Transponders
Wifi Scanner
Satellite Chart
Dish Pointer
SATcalculator
Goodies
     GENERAL INFO
 

 

About Satellite
Archives
StoreCam
Home

 

 

    Track Fedex  Track UPS


Input: your comments and suggestions are always welcome.


 

Welcome to SatelliteDish.com  >> Catalog >> Feedhorn >> Wave Guides

 >> Wave Guides:Wikipedia

 

Wave Guides - Waveguide Components

We supply standard and custom waveguide-Wikipedia components upon request, such as half-height waveguides or lightweight wave guides (with reduced wall thickness). These are available in all the frequency- Bands-Wikipedia e.g. L, S, C, J, X, Ku & R-bands etc. We offer a wide variety of radius and mitered bend waveguides. Copper Aluminum 80,000 thousands Aluminum 90,000 thousands 125,000 thousands wall thickness or thicker Waveguide tube only with or without flange. Sold by each foot WR284 and more. RF WAVEGUIDE COMPONENTS & Microwave components, including complex items as Multipole Filters, Orthomode Transducers, RF Decks, Millimeter wave-Wikipedia and Power Combiner/Dividers, Lumped Element-Wikipedia  Flex guides, miters, Pulsed Products, Gyrotrons, Transitions, Monopulse Comparator, Power Couplers, Flexible, Transducers and most other feedhorn parts all  ISO9001 / AS9100 certified-Wikipedia Full Spectrum Wave guides  - L-Band, S-Band, X-Band, C-Band and Ku-Band, K-Band and Ka-Band and more. Bands-Wikipedia Specialty waveguides - blind mate applications, Coupled Cavity combination rigid/flex assemblies, feeds, terminations and directional couplers are all available to complete your system. BRASS-BRONZE-ALUMINUM-OTHER  GROOVED / No GROOVE

Flange Type Chart - WR75 to WR127,  WR-650 to WR-22 and WRD-Wikipedia


Flange Type waveguide Feed H L Satellite Band Khz x s

Waveguides Materials: Made of brass, copper, silver, aluminum, or any metal that has low bulk resistively. A Complex waveguide sections, in copper, nickel, aluminum (6061), Brass, Bronze or custom  material upon request, with lower insertion losses and close mechanical tolerances.


 

Straights-Wikipedia

Waveguide Straight Section lengths can range from 1" to 144" and have numerous Flange Configurations. Waveguide Straight Section- Double Ridge Straight Sections. Rectangular Waveguide. Waveguide sections of specified length can be supplied with flanges, painted outside and silver or gold plated inside. Also Waveguide Stands.


 

WR-75 Waveguide Straight Section

WR-75 Waveguide Straight Section

$110.00

Description: WR75 5" Straight Section assembly, both flanges are cover flanges with grooves, made of brass material. The overall length is 24 inches from flange face to flange face. WG lengths can range from 1" to 144".

Straight Data Sheet

 

 

WR-137 Waveguide Straight Section

 

WR-137 Waveguide Straight Section

$110.00

Description: WR137 5" Straight Section assembly, both flanges are cover flanges with grooves, made of brass material. The overall length is 24 inches from flange face to flange face. WG lengths can range from 1" to 144".

Straight Data Sheet

 

 

WR-75 Waveguide Straight Section

WR-75 Waveguide Straight Section

$89.00

Description: WR75 2" Straight Section assembly, both flanges are cover flanges with grooves, made of brass material. The overall length is 24 inches from flange face to flange face. WG lengths can range from 1" to 144".

Straight Data Sheet

 

WR-137 Waveguide Straight Section

WR-137 Waveguide Straight Section

$89.00

Description: WR137 2" Straight Section assembly, both flanges are cover flanges with grooves, made of brass material. The overall length is 24 inches from flange face to flange face. WG lengths can range from 1" to 144".

Straight Data Sheet

 

Double-Ridge-Straight 

Double-Ridge-Straight 

$165.00

Description: 5" Inch 3.5 - 40.0 GHz 1.10 Typical Max VSWR (VSWR varies with design) Numerous Flange Configurations available. Aluminum (6061) Waveguide Available. Corrosion protection with a flat black finish

Double-Ridge-Straight Data Sheet

 

 

WR-137 & WR-75 Grooved No Groove Waveguide Flange Straight Section

WR-137 & WR-75 Grooved No Groove Waveguide Flange Straight Section 

$105.00

Description: WR137 6" No Groove flanges. Straight Section assembly, both flanges are cover flanges with no grooves, made of brass material. The overall length is 24 inches from flange face to flange face. WG lengths can range from 1" to 144".

Straight Data Sheet

 

 

Round Flange Rigid Straight Section

Round Flange Rigid Straight Section

$155.00

Description: 10" Inch 3.5 - 40.00 GHz 1.15 Typical Max VSWR (VSWR varies with design) Numerous Flange Configurations available Aluminum (6061) Waveguide Available. Application Sat com, Aerospace, Radar, ISM, SNG & Uplink Other. Technical Specifications Frequency (GHz) up to 110GHz VSWR (Max) 1.1 (Values for through flanges only) Insertion loss 0.1dB Power up to 5KW Mechanical Specifications Material Al/Cu Finish Unplated ,silver tin plate or other Size (mm) W X H X L Environmental Specifications Operating Temperature -55~+85

Double Ridge Twist Data Sheet

 

 

 

Rigid Rectangular Waveguide

Rigid Rectangular Waveguide

$155.00

Description: We offer a standard product line of waveguide covering the entire frequency range for different waveguide sizes from WR975 to WR10. Almost any combination of flanges is offered based on the customer specifications. Low insertion loss ,High corrosion resistance. Low cost, Fast delivery. Application Sat com, Aerospace, Radar, ISM, SNG & Uplink Other. Technical Specifications Frequency (GHz) up to 110GHz VSWR (Max) 1.1 (Values for through flanges only) Insertion loss 0.1dB Power up to 5KW Mechanical Specifications Material Al/Cu Finish Unplated, silver tin plate or other Size (mm) W X H X L Environmental Specifications Operating Temperature -55~+85

Double Ridge Twist Data Sheet

 

Ultra High Frequency Straights -Size (mm) W X H X L

 

CP130 K-band Straight

CP130 K-band Straight

$148.00

Description: 6" Inch These waveguide bends operate across 12 frequency bands from C band to W band. In waveguide systems that require a signal to turn or bend 90 degrees, precision waveguide bends are used as to not degrade the transmission signal. WR187 WR159

CP130-KS Data Sheet

 

 

WR-90 X-band 90 Straigt

WR-90 X-band 90 Straight

$135.00

Description: 5" Inch MILLIMETERWAVE WR112 WR90 COMPONENTS - Electroforming - Electroplating- Reproduced Shape of Mandrel - Tolerance of one Micron. WR51 to WR137

WR90-XS Data Sheet

 

 

 

MILLIMETER WAVE

 

MILLIMETER WAVE

$155.00

Description: 6" Inch Gold MILLIMETERWAVE - Electroforming - Electroplating- Reproduced Shape of Mandrel- Tolerance of one Micron.WR-42 Straight Round Waveguide Straight With a UG-387/ · PE-W10TW1002. WR-10. 75 - 110. Brass - Gold. 0.750. 1.100. Left-hand. 45. UG-387 / U-Mod. E-band / Millimeter-Wave Point-to-Point, Radio Transmission, Lab testing and Military.

GLDWR42STR Data Sheet

 

 

 

 

Ultra High Frequency Rectangular Straight 

Ultra High Frequency Rectangular Straight 

$249.98

Description: 10" Inch GLD 18 GHz to 110 GHz across seven bands; Waveguide sizes from WR-42 to WR-10.Gold. Gold. Compliance Certifications. RF Waveguide Twists: WR-90, WR-28 flanges. Change polarization. Silver- plated and gold waveguide twists E-band / Millimeter-Wave Point-to-Point, Radio Transmission, Lab testing and Military. E-band / Millimeter-Wave Point-to-Point, Radio Transmission, Lab testing and Military.

SGWR10STR Data Sheet

 

 

 

 

X-Band Straight Round Waveguide Section Cooper

X-Band Straight Round Waveguide Section Cooper

$375.98

Description: 6" Inch 3.5 - 40.00 GHz 1.15 Typical Max VSWR (VSWR varies with design) Numerous Flange Configurations available Aluminum (6061) Waveguide Available. Heavy Wall, R32, WR284, 2.84 x 1.34, Copper Heavy Wall .125 or .173, 2.60-3.95. UG choke CPR

Double Ridge Twist Data Sheet

 

 

 

 

WR75 Straight Rectangular Waveguide Section Cooper

WR75 Straight Rectangular Waveguide Section Cooper

$399.00

Description: 3.5 - 40.00 GHz 1.15 Typical Max VSWR (VSWR varies with design) Numerous Flange Configurations available Aluminum (6061) Waveguide Available. Heavy Wall, R32, WR284, 2.84 x 1.34, Copper Heavy Wall .125 or .173, 2.60-3.95.

Double Ridge Twist Data Sheet

 

 

 

 

Bends-Wikipedia

Waveguide Bends are available in E and H plane configurations with an angle of 90°. Bends of 30°, 45° and 60° can be supplied to special order. Waveguide Mitered Bends - Waveguide Formed Bends - RF and microwave waveguide bends for radar, SATCOM and instrumentation. 5Ghz Slotted Waveguide 2320MHz (13cm) Slotted waveguide. E-Plane Bends - H-Plane Bends. Passive High Power RF components in Ku, S, C, X Bands and more.


 

Ku-Band 90 Elbow Bend

    WR-75   H-Bend            E-Bend   

Ku-Band 90 Elbow Bend

$98.00    WR75 H-Bend

$98.00     WR75 E-Bend

Description: 2X2 Ku-Band WR-75 90 Bend H & E plane waveguide Bends 1.70 - 40.00 GHz Precision Tuned Cast bend (Bronze or Aluminum Cast) Standard Material Copper or Aluminum (6061) WR-75 Bend or 90 The terms "E" and "H" plane refers to the electrical and magnetic planes of rectangular waveguide. Available in 30, 45, or 90 degree bends.

WR75-90 Data Sheet

 

 

C-Band 90 Elbow bend

 WR-137   E-Bend        H-Bend    

C-Band 90 Elbow bend

$145.00  WR137 H-Bend

 

$145.00  WR137 E-Bend

Description: 2X2 C-Band WR-137 90 Bend E & H plane waveguide Bends 1.70 - 40.00 GHz Precision Tuned Cast bend (Bronze or Aluminum Cast) Standard Material Copper or Aluminum (6061) WR-137 Bend or 90 The terms "E" and "H" plane refers to the electrical and magnetic planes of rectangular waveguide. Available in 30, 45, or 90 degree bends.

WR137-90 Data Sheet

 

 

X-Band 90 Bend Turn Elbow 

X-Band 90 Bend Turn Elbow 

$120.00

Description: Waveguide Mitered Bends 1.70 - 40.00 GHz Precision Tuned Cast Miters (Bronze or Aluminum Cast) Standard Material Copper or Aluminum (6061) Waveguide All Bends are Custom Built to Customer Specifications. Custom waveguide components.

XBAND90 Data Sheet

 

 

CP130 K-band 90 Bend 

CP130 K-band 90 Bend 

$149.00

Description: Waveguide Mitered Bends 1.70 - 40.00 GHz Precision Tuned Cast Miters (Bronze or Aluminum Cast) Standard Material Copper or Aluminum (6061) Waveguide All Bends are Custom Built to Customer Specifications. Custom waveguide components.

CP130K90 Data Sheet

 

 

 

Mitered Bend

Mitered Bend

$59.00

Description: Waveguide Mitered Bends 1.70 - 40.00 GHz Precision Tuned Cast Miters (Bronze or Aluminum Cast) Standard Material Copper or Aluminum (6061) Waveguide All Bends are Custom Built to Customer Specifications. Custom waveguide components.

Mitered Bends Data Sheet

 

 

 

 

Waveguide Miter Bend 

Waveguide Miter Bend 

$100.00

Description: Waveguide Miter Bend We offer a wide variety of radius and mitered bend waveguides. They can be manufactured with different flange types. The available body materials are copper/brass, aluminum. Multi-degree bends can be specially designed for every customers unique requirements.

Mitered Bends Data Sheet

 

 

 

 

Formed Bend WR75

Formed Bend WR75

$160.00

Description: Waveguide Formed Bends 1.70 - 40.00 GHz Standard Frequencies. Low Insertion Loss. Low VSWR. Material Copper/Bronze or Aluminum (6061) waveguide. All the parts are painted flat black and flanges are polished, unplated and irradiated. We offer additional upgrades on paint.

Formed Bends Data Sheet

 

 

 

Double Ridge Waveguide Bend 580

 

Double Ridge Waveguide Bend 580

$190.00

Description: 3.5 - 40.0 GHz Performance Frequency. 1.15 Typical VSWR (VSWR varies with design) Numerous Flange Configurations available. Aluminum (6061) Waveguide Available. Corrosion protection with flat black finish. Double Ridge Waveguide - Formed Bends.

Double-Ridge-Bend Data Sheet

 

 

 

S-Bend Bend

S-Bend Bend 

$240.00

Description: 3.5 - 40.0 GHz Performance Frequency. 1.15 Typical VSWR (VSWR varies with design) Numerous Flange Configurations available. Aluminum (6061) Waveguide Available. Corrosion protection with flat black finish..

S-Bend Data Sheet

 

 

 

C-band WR-137 E & H Plane

C-band WR-137 E & H Plane

$210.00

Description: 3.5 - 40.0 GHz Performance Frequency. 1.15 Typical VSWR (VSWR varies with design) Numerous Flange Configurations available. Aluminum (6061) Waveguide Available. Corrosion protection with flat black finish..

DEHPANEWR137 Data Sheet

 

 

 

 

CF - FA120 

CF - FA120 

$298.00

Description: Satellite communication antenna with the advantage of miniaturization and portability. Available for a wide range of applications, containing remote areas, island, village, oil filed, mina area, finance, transportation, civil aviation, environment, water power, electric power, geology, salvage, rescue, and emergency. Aluminum material. High gain and excellent sidelobe performance. Simple and robust structure.

CF-FA120 Data Sheett

 

 

 

 

Waveguide Bend

Waveguide Bend 

$199.00

Description: 3.5 - 40.0 GHz Performance Frequency. 1.15 Typical VSWR (VSWR varies with design) Numerous Flange Configurations available. Aluminum (6061) Waveguide Available. Corrosion protection with flat black finish..

Double-Ridge-Bend Data Sheet

 

 

 

Ultra High Frequency Bends K-band 90 Bend

Ultra High Frequency Bends K-band 90 Bend

$199.00

Description: These waveguide bends operate across 12 frequency bands from C band to W band. In waveguide systems that require a signal to turn or bend 90 degrees, precision waveguide bends are used as to not degrade the transmission signal. Mil Spec WR28

CP130-K Data Sheet

 

 

 

Ultra High Frequency Bends X-band 90 Bend

Ultra High Frequency Bends X-band 90 Bend 

$199.98

Description: These waveguide bends operate across 12 frequency bands from C band to W band. In waveguide systems that require a signal to turn or bend 90 degrees, precision waveguide bends are used as to not degrade the transmission signal. Mil Spec UG Choke

WR90-X Data Sheet

 

 

MILLIMETER WAVE Bend

MILLIMETER WAVE Bend

$279.00

Description: WR-Waveguide bends for Radar, SATCOM and instrumentation Flanges at waveguide ends. Common designations in North America and the NATO area include consensus names such as in Table 32.2, the EIA WR numbers, the IEC  Waveguide is still used, however, in radar and satellite transmitters and other applications. MMBand other WR-51 Waveguide bends for Radar, SATCOM and instrumentation UG51/U UG52B/U

K281C Data Sheet

 

 

 

Ultra High Frequency  Bend

Ultra High Frequency  Bend

$263.00

Description: WR51, WR52, S292  waveguide bends have low loss and voltage standing wave ratio (VSWR) as low as 1.08:1 and are available in E-plane and H-plane configurations. These 90 degree waveguide bends are made with gold-plated, oxygen-free hard copper (OFHC) or painted copper alloy. The bends are also offered with either a UG-style flange per the military standard or a CPR-style flange.

WR42G Data Sheet

 

 

Twists-Wikipedia

Twists - Waveguide Twist is used, whenever a 90 Degree change in the plane of polarization in a waveguide system is required. We also offer a wide variety of Double Ridged Waveguide assemblies specially designed for every customers unique requirements. Waveguide.


 

 

WR-75 Twist

WR-75 Twist

$170.00

Description: WR 75 45 degree CW, twist section, both flanges are cover groove flanges, made of brass material. The overall length is 12 inches from flange face to flange face..

Waveguide Twist Data Sheet

 

 

 

 

WR-137 Twist 

WR-137 Twist 

$169.98

Description: WR 137 45 degree CW, twist section, both flanges are cover groove flanges, made of brass material. The overall length is 12 inches from flange face to flange face..

Waveguide Twist Data Sheet

 

 

Double Ridge Twist

Double Ridge Twist

$195.00

Description: 6" Inch 3.5 - 40.00 GHz 1.15 Typical Max VSWR (VSWR varies with design) Numerous Flange Configurations available Aluminum (6061) Waveguide Available.

Double Ridge Twist Data Sheet

 

 

WR-137 Twist

WR-137 Twist 

$179.00

Description: WR 137 45 degree CW, twist section, both flanges are cover groove flanges, made of brass material. The overall length is 2 inches from flange face to flange face..

Waveguide Twist Data Sheet

 

Double Ridge Twist 10" Inch

Double Ridge Twist 10" Inch

$229.00

Description: 10" Inch 3.5 - 40.00 GHz 1.15 Typical Max VSWR (VSWR varies with design) Numerous Flange Configurations available Aluminum (6061) Waveguide Available.

Double Ridge Twist Data Sheet

 

WR-137 Twist 12" Inch

WR-137 Twist 12" Inch

$179.00

Description: WR 137 45 degree CW, twist section, both flanges are cover groove flanges, made of brass material. The overall length is 12 inches from flange face to flange face..

Waveguide Twist Data Sheet

 

 

Ultra High Frequency Waveguide-Twist 

Ultra High Frequency Waveguide-Twist 

$260.00

Description: WR-10 45 Degree Left-hand Waveguide Twist With a UG-387/ · PE-W10TW1002. WR-10. 75 - 110. Brass - Gold. 0.750. 1.100. Left-hand. 45. UG-387/ -Mod. E-band / Millimeter-Wave Point-to-Point, Radio Transmission, Lab testing and Military.

GLDWR42TWS Data Sheet

 

 

 

MILLIMETER WAVE Twist 

MILLIMETER WAVE Twist 

$180.00

Description: 18 GHz to 110 GHz across seven bands; Waveguide sizes from WR-42 to WR-10.Gold. Gold. Compliance Certifications. RF Waveguide Twists: WR-90, WR-28 flanges. Change polarization. Silver- plated and gold waveguide twists

SGWR10TWS Data Sheet

 

Transitions-Wikipedia

Waveguide and Flange transitions are a way of propagating RF energy from one Frequency to another Frequency. We stock standard transition lengths but can manufacture to customer specifications. Flange Transitions - Flange Adapters are used to facilitate connections between different types or formats of flanges used for the same waveguide size. These are produced in various waveguide bands in the 1.13 to 112 GHz. 


 

 

Flange Transition

8" Inch WR137 to WR159 Transition 

$399.00

Description: 8" Inch WR137 to WR159 Transition Assembly, Both flanges are CPRG Style, made of brass material. Waveguide-to-Waveguide Transitions for both standard and non-standard waveguides. Various flange configurations are possible. Sizes from WR-22 to WR-650. Additional sizes, extended range, and custom configurations are also available.

WR137-159 Data Sheet

 

Flange waveguide Transition

Flange waveguide Transition

$320.00

Description: We offer both stepped and tapered waveguide transitions from standard rectangular waveguide adapters in overlapping bands to customized transitions for multiple bands. Stepped transitions are primarily for narrower bands where a compact size is important. Tapered transitions are for wideband applications, and can taper through one or more waveguide sizes. Double-ridge, additional sizes, extended range, and custom configurations are also available. Sizes from WR-22 to WR-650

FTDRW42 Data Sheet

 

 

 

Waveguide Transition

Waveguide Transition 

$299.00

Description: Waveguide Transitions We offer waveguide transitions. They allow very efficient propagation of RF energy from one waveguide size to another. Feature Efficient propagation, Low insertion loss Fast delivery, Low cost Application Sat com, Aerospace, Radar, ISM,SNG & Uplink Other Technical Specifications Frequency (GHz) up to 170GHz VSWR(Max) 1.2dB (Values for through flanges only) Insertion loss 0.2dB Power up to 5KW Technical Specifications Material Al/Cu Finish Unplated, silver tin plate or other. Environmental Specicfications Operating Temperature -55~+85

WR137-75 Data Sheet

 

 

 

Flange Change Transition

Flange Change Transition 

$CALL

Description: Waveguide Transitions We offer waveguide transitions. They allow very efficient propagation of RF energy from one waveguide size to another. Feature Efficient propagation, Low insertion loss Fast delivery, Low cost Application Sat com, Aerospace, Radar, ISM, SNG & Uplink Other Technical Specifications Frequency (GHz) up to 170GHz VSWR (Max) 1.2dB (Values for through flanges only) Insertion loss 0.2dB Power up to 5KW Technical Specifications Material Al/Cu Finish Unplated, silver tin plate or other. Environmental Specifications Operating Temperature -55~+85

WR75159 Data Sheet

 

 

 

 

Flange Waveguide Transition

Flange waveguide Transition

$200.00

Description: We offer both stepped and tapered waveguide transitions from standard rectangular waveguide adapters in overlapping bands to customized transitions for multiple bands. Stepped transitions are primarily for narrower bands where a compact size is important. Tapered transitions are for wideband applications, and can taper through one or more waveguide sizes. Double-ridge, additional sizes, extended range, and custom configurations are also available. Sizes from WR-22 to WR-650 

FWTWR42 Data Sheet

 

 

WR22 to WR650 Transition

WR22 to WR650 Transition

$500.00

Description: Waveguide Transitions We offer waveguide transitions. They allow very efficient propagation of RF energy from one waveguide size to another. Feature Efficient propagation, Low insertion loss Fast delivery, Low cost Application Sat com, Aerospace, Radar, ISM,SNG & Uplink Other Technical Specifications Frequency (GHz) up to 170GHz VSWR (Max) 1.2dB (Values for through flanges only) Insertion loss 0.2dB Power up to 5KW Technical Specifications Material Al/Cu Finish Unplated, silver tin plate or other. Environmental Specifications Operating Temperature -55~+85

CPWRFT Data Sheet

 

 

Divider & Tee-Wikipedia

Our power dividers are assembled and tested with the highest craftsmanship and standards. Useful in applications where smaller sizes are required. For applications where full band width is needed. Various flange and configurations are available. We offer a variety of compact designs and cover the frequency range of 0.32 to 112 GHz. Tee junctions are manufactured with the full range of International flange styles as shown in our Flange Catalogue above . E-H Tee Or Magic Tee. E-Plane Tee - E-Plane Tee are series type T- junction and consists of three section of waveguide joined together in order to divide or compare power levels. Matched Magic Tee - Al the four ports are matched to a max VSWR. These are available in all the frequency- bands e.g. L, S, C, J, X, Ku & R-bands etc.


E-H Tee Or Magic Tee - E-H Tee consists of a section of waveguide with both cseries and shunt waveguide arms, mounted at the exact mid point of main arm, Both ends of the section of waveguide and both arms are flanged on their ends. These Tees are employed in balanced mixers, automatic frequency control circuits and impedance measurement circuit etc. This becomes a four terminal device where one terminal is Isolated from the input terminal. 


 

High Power Variable Waveguide Combiner / Divider

High Power Variable Waveguide Combiner / Divider

$799.00

Description: High-Power Variable Waveguide Combiner / Divider We offer power combiners and dividers that are highly reliable with high performance. Feature-Good Isolation High power capacity Application Phased array radar, missile guidance, high-gain antenna and power synthesis system Other Technical Specifications Isolation (dB) >35 Distribution ratio (dB) 3±0.25 Band with (dB) 10%~20% Mechanical Specifications Material Al/Cu Environmental Specifications Operating Temperature -55~+8. .

HPCD Data Sheet

 

 

Waveguide Magic Tee 

Waveguide Magic Tee

$799.00

Description: Waveguide Tee We offer a broad line of tees to fit a variety of waveguide sizes, and generally superior in performance. Feature Good unbalance Good Isolation Lost cost Application Phased array radar, missile guidance, high-gain antenna and power synthesis system. Other Technical Specifications Unbalance (dB) ±0.25 VSWR (Max) 1.5(Max) Band with <15% Mechanical Specifications Material Al/Cu Finish silver/gold/nickel/ passivation conductive oxide and the like Environmental Specifications: Operating Temperature -55~+85

WR75-Tee Data Sheet

 

 

 

WR112 Waveguide Tee

WR112 Waveguide Tee

$699.00

Description: WR112, WR90, WR75, WR62, WR51, WR42, WR348 Waveguide HT We offer a range of high-performance microwave waveguide ET, HT connector products, covering the frequency range 0.3-110GHz. Feature-Good unbalance Lost cost Application Phased array radar, missile guidance, high-gain antenna and power synthesis system i 2015-6-10 9:32:16 Other Technical Specifications Unbalance (dB) ±0.25 VSWR (Max) 1.5(Max) Band with <15%Mechanical Specifications Material Al/Cu Finish silver/gold/nickel/ passivation conductive oxide Environmental Specification Operating Temperature -55~+85

WR122-Tee Data Sheet

 

 

WR-137 Waveguide Tee

WR-137 Waveguide Tee

$799.00

Description: Waveguide ET We offer a range of high-performance microwave waveguide ET, HT connector products, covering the frequency range 0.3-110GHz.Our manufacturing processes provide maximum symmetry in fabrication and resulting in the following electrical performance over a 10% bandwidth. Feature Compact Lost cost Application Phased array radar, missile guidance, high-gain antenna and power synthesis system Other Technical Specifications Unbalance (dB) ±0.25 VSWR (Max) 1.5(Max) Band with <15% Mechanical Specifications Material Al/Cu Finish silver/gold/nickel/ passivation conductive oxide and the like
Environmental Specification 

WR137-Tee Data Sheet

 

 

Broadband Waveguide Combiner/Divide

 Broadband Waveguide Combiner/Divider

$CALL

Description: Broadband Waveguide Combiner/Divider Waveguide Combiners/Dividers in a choice of configurations. Feature Wideband, high power capacity, low insertion -excellent output isolation Application Phased array radar, missile guidance, high-gain antenna and power synthesis system - Other Technical Specifications Operation frequency 1~40 GHz Relative bandwidth >15% Power ratio 110:1 VSWR: 1.5 Standard, 1.2Available output isolation >20dB Mechanical Specifications Material Al/Cu Size (mm) 36*77*35Enviromental Specifications Operating Temperature -55~+85℃

BWCD Data Sheet

 

 

 

CP130 C-band 90 Bend JOINER

CP130 C-band 90 Bend JOINER

$1,200.00

Description: These waveguide bends operate across 12 frequency bands from C band to W band. In waveguide systems that require a signal to turn or bend 90 degrees, precision waveguide bends are used as to not degrade the transmission signal.

Mitered Bends Data Sheet

 

 

 

Magic Tee - Gold

Magic Tee - Gold

$899.00

Description: Matched Magic Tee - Al the four ports are matched to a max VSWR. These are available in all the frequency- bands e.g. L, S, C, J, X, Ku & R-bands etc.

MTSF Data Sheet

 

Double Ridge GOLD Tee

Double Ridge GOLD Tee

$899.00

Description: A double ridge cross-waveguide bi-directional coupler is 4 ports, 180 degree hybrid. Various flange and configurations are available. We offer a variety of compact designs cover the frequency range of 0.32 to 112 GHz. Tee junctions are manufactured with the full range of International flange styles as shown in our Flange Catalogue . We pride ourselves in offering top-quality product at reasonable prices

MTDRF Data Sheet

 

 

Waveguide to Connector-Wikipedia

We have a comprehensive range of waveguide to coaxial adapters covering all waveguide bands up to 173GHz. Designs are available for most commonly used coaxial adapter types. Additionally we offer optimized narrow band devices, Low PIM versions, High Power versions and adapters designed for WRD double ridge applications. WR90 Waveguide Isolator X-Band 8.2 to 12.4 GHz and more. SC, N, TNC, F, SMA Waveguide to coaxial connector male or female. Customizations such as flange type, base material and finish are available. Please contact us for further information. Waveguide to coaxial connector Male or Female. Coaxial To Wave Guide Adapters.


 

WAVEGUIDE TO COAX ADAPTER

 

WAVEGUIDE TO COAX TYPE SMA ADAPTER

$199.98

Description: Frequency Range: 2.6 - 40GHz( in 12 Freq. Bands) Connector: N, SMA, SC, TNC, 3.5mm, K Waveguide to Coax Adapters are constructed of aluminum or cooper and are covering the waveguide sizes WR-28 thru WR-284. The VSWR over the full waveguide bandwidth is 1.20 max. Additional sizes including reduced height, extended frequency range and custom design configurations can be supplied on request. SMA, Type N or “TNC” connectors. Dual channel or multi channel are also available in both waveguide or coax or a combination. Coaxial Adapter. Double Ridge High Power Waveguide to Coaxial Adapter.

 

 

waveguide  port

 

WAVEGUIDE TO COAX TYPE N ADAPTER

$199.98

Description: Frequency Range: 2.6 - 40GHz( in 12 Freq. Bands) Connector: N, SMA, SC, TNC,3.5mm, K Waveguide to Coax Adapters are constructed of aluminum or cooper and are covering the waveguide sizes WR-28 thru WR-284. The VSWR over the full waveguide bandwidth is 1.20 max. Additional sizes including reduced height, extended frequency range and custom design configurations can be supplied on request all styles “I”, “U” and “L” or “F” both pressurized and unpressurized. Coaxial Converter products, Coax connector options are N-Type, SMA, SC, N, TNC, F, and K-Type.

 

 

 

Waveguide to F-Type Connector

Waveguide to F-Type Connector

$299.99

Description: Test Port Adapters Waveguide Connectors Frequency Range: 1.7 - 40.0 GHz Available in all types of Waveguide Flange and Connectors. Mating compatible with the NMD3.5 connector found on some HP VNA test sets and the special 2.92mm (K) connector on some Anritsu test sets. We recommend that larger waveguide adapters (R, S, E, and G bands) not be connected directly to test sets without support.

BW2CF Data Sheet

 

Waveguide to N-Connector Grooved

Waveguide to N-Connector Grooved

$299.98

Description: Test Port Adapters Waveguide Connectors Frequency Range: 1.7 - 40.0 GHz Available in all types of Waveguide Flange and Connectors. Mating compatible with the NMD3.5 connector found on some HP VNA test sets and the special 2.92mm (K) connector on some Anritsu test sets. We recommend that larger waveguide adapters (R, S, E, and G bands) not be connected directly to test sets without support.

BW2CMN Data Sheet

 

 

 

Waveguide to Coaxial

Test Port Adaptors

$269.98

Description: Waveguide to Coaxial Adapter 1.70 - 18.00 GHz Performance Frequency. 1.25 Typical Max VSWR (VSWR varies with design) Male or Female Connectors available. Numerous Flange Configurations available. Aluminum (6061) or Copper (OFHC) Waveguide Material. SC, N, TNC, F, SMA Waveguide to coaxial connector Male or Female.

BW2CN Data Sheet

 

 

Test Port Adaptors

SMA Type Waveguide to Connector

$269.98

Description: Waveguide to Connector Adapter 1.70 - 40.00 GHz Performance Frequency. 1.25 Typical Max VSWR (VSWR varies with design) Male or Female Connectors available. Numerous Flange Configurations available. Aluminum (6061) or Copper (OFHC) Waveguide Available. FLANGE TYPE CONNECTOR TYPE

BW2CSMA Data Sheet

 

 

.

Launch Adapter

Launch Adapter 

$799.90

Description: Sate-of-the-art End Launch adapters fulfill the need for in-line units with broadband capability. Their unique design achieves low profile with short length, low loss and VSWR.Test Port Adapters Double Ridge Waveguide to Coaxial High power Waveguide Coaxial Adapter Adapter Flange Groove Connector Double Ridge End launch Waveguide to connector. Available in Larger flange (R, S, E, and G bands) 

ELAN Type Data Sheet

 

 

 

 

Launch Adapter

Launch Adapter

$CALL

Description: Transforms waveguide transmission line into coaxial line. Test Port Adapters Double Ridge Waveguide to Coaxial. Power can transmitted in either direction, and each adapter covers the full frequency range of its waveguide band with SWR less than 1.3. low profile with short length, low loss and VSWR. High-power Waveguide Coaxial Adapter Adapter Flange Groove Connector Double Ridge End launch Waveguide to connector. Available in Larger flange (R, S, E, and G bands) 

ELASMA Type Data Sheet

 

 

 

Loads and Termination-Wikipedia

A waveguide load is used to absorb microwave energy from the microwave system. It is often used as a test load for generators and as the terminating load in an isolator. A wide range of loads and terminations from ultra short low power terminations to water cooled loads in the kW CW range. loads suitable for low, medium and high power applications with water or air cooled systems. For high power applications. High Power Loads - Medium Power Load - Low Power Load - Low VSWR Load. Matched Terminations - Movable Shorts - Non-reflective type of Termination. Precision Movable Shorts Waveguide Filters - non-contacting type plunger is driven by the micrometer of least-count 0.01 mm for precise movement and reading of plunger. Precision Sliding Termination - The terminating element is a tapered dissipative dielectric and has a travel greater than one-half wave-length at the lowest operating frequency. Used to absorb any electromagnetic interference which may occur in a RF or microwave application.


 

 

WR137 1kw 1000 watt High Power Load

WR137 1kw 1000 watt High Power Load

$650.00

Description: High Power Load 1.70 - 40.00 GHz High Performance. 1.15 Typical VSWR Forced Air required for cooling. Standard Material Aluminum (6061) 100-4000 Watt Loads. Fin orientation varies per specifications. Contact Us for alternative design options.

HPL Data Sheet

 

 

 

 

 

300 Medium Power Load 

300 Medium Power Load 

$379.00

Description: Medium Power Load 1.70 - 40.0 GHz Performance Frequency1.25 Typical Max VSWR (VSWR Varies with design) Power ratings vary with design. Numerous flange configurations available. Aluminum (6061) or Copper WR Waveguide available. Cooling fin requirements vary with design & power specifications. Contact Us for any potential alternative design options.

MPL Data Sheet

 

 

 

Double Ridge 580 500 watts High Power Load

Double Ridge 580 500 watts High Power Load

$650.00

Description: Double Ridge High Power Load 3.5 - 40.0 GHz 1.15 Typical Max VSWR (VSWR varies with design) Numerous Flange Configurations available. Aluminum (6061) Waveguide Available. Cooling Fin orientation varies with design. Forced Air required for cooling. WRD350

DRHPL Data Sheet

 

 

 

Water-cooled power waveguide load

Water-cooled power waveguide load

$CALL

Description: Water-cooled power waveguide loads - Waveguide loads are ideal for use in high power systems as dummy antennas to permit testing, tuning , and maintenance without radiating RF power. A new family of waveguide loads is available from 0.96GHz to 40 GHz. Feature High peak power Rugged Mechanical Construction Low cost, Fast delivery.

WCHPL Data Sheet

 

 

Short dimension waveguide load

Short dimension waveguide load

$199.98

Description: Our High-performance waveguide loads are a low VSWR (1.03:1 typ.) used to terminate a waveguide run. Feature Full Waveguide Frequency Range Low VSWR Low cost, Fast delivery

SDWL Data Sheet

 

 

Full Band Low Power Load

Full Band Low Power Load

$170.00

Description: Low Power Load 1.70 - 40.0 GHz Performance Frequency. 1.25 Typical Max VSWR (VSWR varies with design) Power ratings can vary with design. Multiple Design lengths available. Numerous Flange Configurations available. Aluminum (6061) or Copper Waveguide Available. Contact Us for available options.

LPL Data Sheet

 

See: Feedhorns See: Custom Built

 

 

Standard waveguide mismatch load

Standard waveguide mismatch load

$198.98

Description: Standard waveguide mismatch load Our High-performance waveguide mismatch loads are used to terminate a waveguide run. All loads flange interface is precisely controlled to offer the optimum performance.

Mismatch Load Data Sheet

 

 

 

Precision waveguide load

Precision waveguide load

$CALL

Description: Precision waveguide load The series low power waveguide fixed terminations are precision, low VSWR terminations suited to a wide variety of precision laboratory applications. They can be used for full band one-port calibration and full two-port, isolation calibration.

Precision Load Data Sheet

 

 

Circular Waveguide Reflection Load

Circular Waveguide Reflection Load

$279.00

Description: Circular Waveguide Reflection Load
For TM01 mode circular waveguide device or precision measuring circular waveguide system, the terminal for a good match. Application
For T&M Other Applications Technical Specifications VSWR (Max) 1.1 Mechanical Specifications Material Al/Cu

TM01 Circular Reflection Data Sheet

 

 

 

Circular Waveguide Reflection Load

Circular Waveguide Reflection Load

$234.00

Description: Flange Circular waveguide reflection load using absorbent material cone structure, by the shape of the design, with TE11 mode, TE21 mode, TM01 mode circular waveguide and other major electromagnetic mode for good absorption properties.

Circular Reflection Load Data Sheet

 

 

 

Low VSWR Load

Low VSWR Load

$190.00

Description: This Low VSWR / LOW Power Termination is precision machined, linear tapered insert that is constructed of high power ceramic. 1.70 - 40.00 GHz Performance Frequency. 1.02 Typical VSWR (VSWR will vary with design) Low power, calibration termination. Numerous Flange Configurations available. Aluminum (6061) or Copper Waveguide Available. We offer special unit design upon customer request.

LVSWRL Data Sheet

 

 

 

 

 

Double Ridge Double-Ridge-Waveguide-Short

Double Ridge Double-Ridge-Waveguide-Short

$234.00

Description: This Double Ridge High Power Load
 also Double Ridge Medium Power Load and Low VSWR / LOW Power Termination is precision machined, linear tapered insert that is constructed of high power ceramic. 1.70 - 40.00 GHz Performance Frequency.

DRWS10 Data Sheet

 

 

Ku-Band Load Compensator

Ku-Band Load Compensator

$599.00

Description: Our loads and attenuators are available in a range of sizes from WG10 to WG22 (WR284 to WR28) with power handling up to 200 watt continuous and a 900 kilowatt peak. Custom requirements can readily be accommodated and combined with a power divider to increase overall capabilities or an unusual space envelope

KULOAD200 Data Sheet

 

 

 

X-Band Load Compensator

X-Band Load Compensator

$699.98

Description: Our loads and attenuators are available in a range of sizes from WG10 to WG22 (WR284 to WR28) with power handling up to 200 watt continuous and a 900 kilowatt peak. Custom requirements can readily be accommodated and combined with a power divider to increase overall capabilities or an unusual space envelope

X-BANDLC Data Sheet

 

 

Limiters - Attenuators-Wikipedia

We offer a series of high quality waveguide attenuators. Standard attenuation values of the models are 3, 6, 10, 20 and 30dB.Other values are available upon request. Fixed Attenuators - Variable Attenuators - Precision Variable Attenuators. limiters contain patented band pass filters which offer complete protection against spurious emanations. Certain limiters also contain externally biased diodes enabling the radar designer to obtain sensitivity timing control. Our limiters offer protection from microwave power levels from 2 kW to 100 kW.


 

 

 

Coupled Waveguide Fixed Attenuator

 Coupled Waveguide Fixed Attenuator

$339.00

Description: Coupled waveguide fixed attenuator. The product is a full bandwidth frequency response and low coupling high directivity coupler based precision broadband fixed attenuator. Commonly used in precision measurements of broadband model control, or fixed attenuator standard. Stable performance. Low VSWR Application Sat  Com/Aerospace/Radar/ISM/SNG & Uplink. Other Technical Specifications Attenuation values (dB) 3~60 VSWR (dB) 1.2 Freq. response (dB) ±0.5~1 Mechanical Specifications Material Al/Cu Environmental Specifications Operating Temperature -55~+85

CWFA Data Sheet

 

 

 

Waveguide Fixed Attenuator

Waveguide Fixed Attenuator

$219.00

Description: Waveguide Fixed Attenuator Waveguide Fixed Attenuators with normal and high power units are also available. For more information feel free to call us and discuss your needs with one of our design engineers.
Feature
Stable performance Low VSWR Application Sat Com/Aerospace/Radar/ISM/SNG & Uplink Other Technical Specifications Attenuation values (dB) 3~30 VSWR (dB) 1.1 Freq. (GHz) up to 112 Mechanical Specifications: Material Al/Cu Environmental Specifications Operating Temperature -55~+85

WFA Data Sheet

 

 

High-Power Coupled Waveguide Fixed Attenuator

High-Power Coupled Waveguide Fixed Attenuator

$CALL

Description: High-power coupled waveguide fixed attenuator High-Power precision attenuators covering the waveguide sizes WR10 through WR770 and attenuation values of 3dB to 60dB. Feature-High Power Low VSWR Application Sat Com/Aerospace/Radar/ISM/SNG & Uplink Other Technical Specifications Average power (w) 10~4000(Max) Attenuation values (dB) 3~60 VSWR (dB) 1.2 Mechanical Specifications Material Al/Cu Environmental Specifications Operating Temperature -55~+85

HPCWFA Data Sheet

 

Precision Waveguide Polarization Attenuator

Precision Waveguide Polarization Attenuator

$CALL

Description: Precision waveguide polarization attenuator Precision waveguide polarization attenuator, the Freq range cover 4 to40GHz. Feature Adjustable Low VSWR Application- Sat Com/Aerospace/Radar/ISM/SNG & Uplink Other Technical Specifications Attenuation values (dB) 0~60 Attenuation accuracy (dB) ±0.2 ±2% VSWR (dB) 1.25 Mechanical Specifications Material Al/Cu Environmental Specifications Operating Temperature -55~+85

PWPA Data Sheet

 

 

Waveguide Variable Attenuator

Waveguide Variable Attenuator

$499.98

Description: High-Power precision attenuators covering the waveguide sizes WR10 through WR770 and attenuation values of 3dB to 60dB. Feature-Adjustable -Low VSWR Application- Sat Com/Aerospace/Radar/ISM/SNG & Uplink Other Technical Specifications Attenuation values (dB) 0~30 VSWR (dB) 1.25 Mechanical Specifications Material Al/Cu Environmental Specifications Operating Temperature -55~+85 Microwave Waveguide WR90 Variable Attenuator X375A 20dB

WVA Data Sheet

 

Waveguide High-Power Variable Attenuator

Waveguide High-Power Variable Attenuator

$699.98

Description: Waveguide High-power variable attenuator High-power continuously variable attenuators covering the waveguide sizes WR10through WR770 with Average power from 10~4000w. Feature-High power -Low VSWR Application:  Sat Com /Aerospace /Radar/ISM/SNG & Uplink Other Technical Specifications Average power (w) 10~4000(Max) Attenuation values (dB) 0~30 VSWR (dB) 1.25 Mechanical Specifications Material Al/Cu Environmental Specifications Operating Temperature -55~+85

WHPVA Data Sheet

 

Shifters-Wikipedia

We offer a wide variety of shifters to meet your products specifications. Each is shifters custom-designed to your exact specification so that you will get the optimum performance at low cost. Phase shifting between transmission lines that feed a patch antenna array. Feed of the phased-array antennae the radiator elements. Waveguide Phase - Shifters - Klystron Based - Gunn Based and more.


 

High-Power Waveguide Variable Phase Shifter

High-Power Waveguide Variable Phase Shifter

$1,200.00

Description: High-Power Waveguide Variable phase shifter A wide variety of high power waveguide phase shifters to meet your design specifications. All our components are produced with the highest quality available. Feature-Stable performance Low VSWR High quality Application Sat Com / Aerospace/ Radar/ ISM / SNG & Uplink. Other Technical Specifications Average power (w) 10~4000(Max) Phase shift (°) 0~360 VSWR (dB) 1.0(Max) Band with 10%-20% Mechanical Specifications Material Al/Cu Environmental Specifications Operating Temperature -55~+85

HPWVPS Data Sheet

 

 

Waveguide Variable Phase Shifter

Waveguide Variable Phase Shifter

$679.98

Description: Waveguide Variable phase shifter We can provide many waveguide variable phase shifter to meet your needs. Our product provide 360ş of phase variation and are precisely adjustable and resetable. Feature Compact -Wide phase tuning range Stable performance Application - Sat Com/ Aerospace / Radar / ISM/ SNG & Uplink Other Technical Specifications Phase shift (°) 0~360VSWR (dB) 1.0(Max) Band with 10%-20% Mechanical Specifications Material Al/Cu Environmental Specifications Operating Temperature -55~+85℃

WVPS Data Sheet

 

 

Waveguide Phase Shifter

Waveguide Phase Shifter

$499.00

Description: Waveguide phase shifter A wide variety of low power waveguide phase shifters and high power waveguide phase shifters to meet your design specifications Feature-Stable performance -Low VSWR Application Sat Com/Aerospace/Radar/ISM/SNG & Uplink Other Technical Specifications Phase shift (°) 0~360 VSWR (dB) 1.5(Max) Band with 10%-20% Mechanical Specifications Material Al/Cu Environmental Speciation Operating Temperature -55~+85

WPIS Data Sheet

 

 

 

 

Waveguide Phase Shifter

Waveguide Phase Shifter

$599.00

Description: Many applications require phase shift to be introduced between two given position in a waveguide system. It consists of a dielectric slab or vane specially shaped to minimize reflection effect. Phase shifter are used to change the effective electrical length of transmission line without changing its physical length. They are particularly useful in microwave bridge circuit where the phase and amplitude must be adjusted independently.

WPS Data Sheet

Ku-Band Phase Shifter

Ku-Band Phase Shifter

$398.00

Description: Waveguide phase shifter A wide variety of low power waveguide phase shifters and high power waveguide phase shifters to meet your design specifications Feature-Stable performance -Low VSWR Application Sat Com/Aerospace/Radar/ISM/SNG & Uplink Other Technical Specifications Phase shift (°) 0~360 VSWR (dB) 1.5(Max) Band with 10%-20% Mechanical Specifications Material Al/Cu Environmental Speculations Operating Temperature -55~+85


114538-01 Phase Shifter 10.70 - 14.50 
114538-04 Phase Shifter 10.70 - 14.50 

 

C-Band Phase Shifter

C-Band Phase Shifter

$296.00

Description: Waveguide phase shifter A wide variety of low power waveguide phase shifters and high power waveguide phase shifters to meet your design specifications Feature-Stable performance -Low VSWR Application Sat Com/Aerospace/Radar/ISM/SNG & Uplink Other Technical Specifications Phase shift (°) 0~360 VSWR (dB) 1.5(Max) Band with 10%-20% Mechanical Specifications Material Al/Cu Environmental Speciation Operating Temperature -55~+85

109892-2 Phase Shifter 3.400 - 4.8000

 

 

Shorts-Wikipedia

We offer a complete line of shorts . They are designed with a hole pattern to match the standard flanges in each waveguide. Other designs and materials are available upon customer request. Waveguide Short Plates - Waveguide short plates are designed to terminate round or rectangular waveguide connectors at the mating plane. They are flat face/flat plane shorts that cover frequencies from 0.75GHz to 110.0GHz


 

Adjustable Waveguide Sliding Short

Adjustable Waveguide Sliding Short

$350.00

Description: Adjustable Waveguide Sliding Short waveguide sliding shorts, also known as adjustable shorts. They are designed using non-contacting type short circuit. They are supplied with a locking knob. These shorts can be supplied with micrometer or digital readout. Feature-DC to 112GHz Low cost, Fast delivery Application For T&M -Other applications Technical Specifications Frequency (GHz) up to 112 Minimum Travel (mm) 300(Max) VSWR (dB) ≥50 Mechanical Specifications Material Al/Cu Environmental Specifications Operating Temperature -55~+85

AWSS Data Sheet

 

 

Waveguide Offset Short

Waveguide Offset Short

$129.00

Description: Waveguide Offset Short A series of waveguide offset shorts which provide high reflection short circuits. Waveguide offset shorts are available with a standard 1/8, 1/4, and 3/8 shorting distance, designed close to the center frequency of each waveguide size. Feature-DC to 112GHz -Low cost, Fast delivery Application- For T&M -Other Applications Technical Specifications Freq. up to 110GHz VSWR (Max) ≥50 Mechanical Specifications Material Al/Cu Environmental Specifications Operating Temperature -20~+70

WOS Data Sheet

 

 

Pressure Window - CPR137G

Pressure Window - CPR137G

$130.00

Description: Waveguide Pressure Window- CPR137G - Pressure Window for WR137, 5.85–8.2 GHz, mates to CPR137. Other CPR112G - CPR187G - PBR100 - WR90 - WR187

See: Feedhorn Parts

 

Pressure Window - WR75

Pressure Window - WR75

$119.00

Description: Waveguide Pressure Window- WR75 - Pressure Window for WR75, 5.85–8.2 GHz, mates to WR75. Other  CPR137. CPR112G - CPR187G - PBR100 - WR90 - WR187

See: Feedhorn Parts

 

Waveguide Shim & Double Ridge Waveguide Short
Waveguide Shim & Double Ridge Waveguide Short

$179.00

Description: Double Ridge Waveguide Short series of waveguide offset shorts which provide high reflection short circuits. Waveguide offset shorts are available with a standard 1/8, 1/4, and 3/8 shorting distance, designed close to the center frequency of each waveguide size. Feature-Low cost, Fast delivery Application- For T&M -Other applications. Technical Specifications Frequency (GHz) up to 40GHz Mechanical Specifications Material l/Cu Environmental Specifications Operating Temperature -20~+70

DRWS Data Sheet

 

 

 

 Includes Gasket and Hardware

Waveguide Shorts & Shorting Plates  WR650 to WR28

$100.00

Description: Waveguide Short Plates - Waveguide short plates are designed to terminate round or rectangular waveguide connectors at the mating plane. They are flat face/flat plane shorts that cover frequencies from 0.75GHz to 110.0GHz.waveguide shorting plates which provide high reflection short circuits for terminating all standard waveguides from WR650 to WR28. They are designed with a hole pattern to match the standard flanges in each waveguide

See: Feedhorn Parts

Transducer (OMT)-Wikipedia

Orthomode Transducer (OMT) The Orthomode transducer component in the RF chain that serves to separate the two orthogonal Rx and Tx signals.  Our transducers, capable of separating horizontal and vertical polarized waves, are readily available in most waveguide sizes. These design feature low VSWR and insertion loss, high isolation and power handling capabilities. OMT's are available for various frequencies both "off-the-shelf" or customized to accommodate a specific requirement. Low insertion losses and VSWR, this component has low cross polarization (CP Models). Also available in Low-PIM and high power models. OMTs can be finished to meet your requirement.


 

Circular Polarizer OMT

Circular Polarizer

$469.98

Description: Phase shifting waveguide circular polarizer with a stable performance of the composite microwave dielectric materials with wide bandwidth, circular polarization axis polarization conversion performance than small. Particularly suitable for use in the millimeter wave band and the microwave band.

PSOMTCP Data Sheet

 

 

 

C130 Waveguide Ortho-Mode Transducer

C130 Waveguide Ortho-Mode Transducer

$599.98

Description: Waveguide Ortho-Mode Transducer- We offer top quality of waveguide t-type ortho-mode transducer, small size and dual polarization coupling arm Feature Low cost, Fast delivery Application: For Feeder system and T&M Other Applications Technical Specifications Freq. Range (GHz) up to 40 VSWR (Max) 1.5(Typ.) Bandwidth (MHZ) 20%(Typ.) Port to Port Isolation (dB) 30(min) Mechanical Specifications: Material Al/Cu Environmental Speciation :Operating Temperature -40~+70 (Typ.)

C130-OMT Data Sheet

 

 

 

 

Waveguide T-type Ortho-Mode Transducer

Waveguide T-type Ortho-Mode Transducer

$3,195.00

Description: Waveguide Ortho-Mode Transducer- Waveguide t-type ortho-mode transducer, small size and dual polarization coupling arm. Feature Low cost, Fast delivery Application: For Feeder system and T&M Other Applications Technical Specifications Freq. Range (GHz) up to 40 VSWR (Max) 1.5(Typ.) Bandwidth (MHZ) 20%(Typ.) Port to Port Isolation (dB) 30(min) Mechanical Specifications: Material Al/Cu Environmental Speciation :Operating Temperature -40~+70 (Typ.)

OMT-KUE-1 Data Sheet
112924-2 OMT 3.400-4.200 
Data Sheet
112924-4 OMT 3.625-4.800 
Data Sheet

 

 

Rx Dual polarized Ku-band OMT

Rx Dual polarized Ku-band OMT

$2,495.00

Description: Rx Dual polarized Ku-band OMT: OMT for Ku terminals with dual orthogonal polarization in the Rx band. Ortho Mode Transducers (OMT) are available for various frequencies both "off-the-shelf" or customized to accommodate a specific requirement. Ku-band OMT: compact OMT for Ku terminals (Rx 10.7-12.95 GHz; Tx 13.75-14.5 GHz), XPD > 35 dB. .Ortho Mode Transducers (OMT) are available for various frequencies both "off-the-shelf" or customized to accommodate a specific requirement.

113527-13 Data Sheet
113527-12
Data Sheet

 

 

Phase Shifting OMT Circular Polarizer

Phase Shifting OMT Circular Polarizer

$CALL

Description: Phase shifting waveguide circular polarizer with a stable performance of the composite microwave dielectric materials with wide bandwidth, circular polarization axis polarization conversion performance than small. Particularly suitable for use in the millimeter wave band and the microwave band.

PSOMTCP Data Sheet

 

 

 

Ultra Hight Freq OMT

Ultra Hight Freq OMT 

$CALL

Description: Phase shifting waveguide circular polarizer with a stable performance of the composite microwave dielectric materials with wide bandwidth, circular polarization axis polarization conversion performance than small. Particularly suitable for use in the millimeter wave band and the microwave band.

PSOMTCP Data Sheet

 

 

 

 

 

Ka-Band Dual polarized OMT

Ka-Band Dual polarized OMT

$CALL

Description: Ka terminals (Rx 19.7-20.2 GHz; Tx 29.5-30.0 GHz). Includes Rx filter. E-band / Millimeter-Wave Dual polarized. Available for various frequencies both E-band OMT: OMT for E terminals with dual orthogonal polarization in the Rx band or customized to accommodate a specific requirement

PSOMTCP Data Sheet

 

 

C-Band Circular Polarizer OMT

C-Band Circular Polarizer OMT

$CALL

Description: Phase shifting waveguide circular polarizer with a stable performance of the composite microwave dielectric materials with wide bandwidth, circular polarization axis polarization conversion performance than small. Particularly suitable for use in the millimeter wave band and the microwave band.

CBCPOMT Data Sheet

 

 

 

 

WR-75 Waveguide Dual Ku OMT

WR-75 Waveguide Dual Ku OMT

$169.98

Description: Waveguide Ortho-Mode Transducer- We offer  top quality of waveguide t-type ortho-mode transducer, small size and dual polarization coupling arm  Feature Low cost, Fast delivery Application: For Feeder system and T&M Other Applications Technical Specifications Freq. Range (GHz) up to 40 VSWR (Max) 1.5(Typ.) Bandwidth (MHZ) 20%(Typ.) Port to Port Isolation (dB) 30(min) Mechanical Specifications: Material Al/Cu Environmental Speciation :Operating Temperature -40~+70 (Typ.)

WR-75-OMT Data Sheet
OMT-KUE-1 
Data Sheet

 

 

 

 

CP130 Waveguide Dual Ku WR75 -  compact OMT

CP130 Waveguide Dual Ku WR75 -  compact OMT

$269.00

Description: Ku-band OMT: compact OMT for Ku terminals (Rx 10.7-12.95 GHz; Tx 13.75-14.5 GHz), XPD > 35 dB. .Ortho Mode Transducers (OMT) are available for various frequencies both "off-the-shelf" or customized to accommodate a specific requirement

113527-16 Data Sheet
113527-17
Data Sheet
112924-7 OMT 3.400-4.200 
Data Sheet
114344-3 OMT 5.725-6.725 
Data Sheet
114616-2 OMT 3.400-4.800 
Data Sheet

 

 

 

Standard Ku OMT

Standard Ku OMT

$169.00

Description: Ortho Mode Transducers (OMT) are available for various frequencies both "off the shelf" or customized to accommodate a specific requirement

111410-01 OMT 10.70 - 12.75 13.75 - 14.50 
111410-02 OMT 10.70 - 12.75 13.75 - 14.50 
111410-03 OMT 10.70 - 12.75 13.75 - 14.50 
111410-08 OMT 10.70 - 12.75 13.75 - 14.50 
111410-16 OMT 10.70 - 12.75 13.75 - 14.50 
111410-17 OMT 10.70 - 12.75 13.75 - 14.50 

 

 

Non Standard Ku OMT

Non Standard Ku OMT

$399.00

Description: Ortho Mode Transducers (OMT) are available for various frequencies both "off-the-shelf" or customized to accommodate a specific requirement

111410-18 OMT 10.70 - 12.75 13.75 - 14.50 
112120-01 OMT 10.70 - 12.75 13.75 - 14.50 
112120-05 OMT 10.70 - 12.75 13.75 - 14.50 
112120-17 OMT 10.70 - 12.75 13.75 - 14.50 
113810-02 OMT 10.70 - 12.75 13.75 - 14.50 

 

 

 

 

Extended Ku Band OMT

Extended Ku Band OMT

$399.98

Description: KU-BAND EXTENDED OMT TRANSMIT REJECT FILTER Ortho Mode Transducers (OMT) are available for various frequencies both "off-the-shelf" or customized to accommodate a specific requirement

OMT-KUE Data Sheet

 

 

 

 

Most Popular Ku-Band Rx/TX OMT

Most Popular Ku-Band Rx/TX OMT

$139.90

Description: KU-BAND Rx/Tx OMT WITH TRANSMIT REJECT FILTER. Ku-band OMT: compact OMT for Ku terminals (Rx 10.7-12.95 GHz; Tx 13.75-14.5 GHz), XPD > 35 dB. .Ortho Mode Transducers (OMT) are available for various frequencies both "off-the-shelf" or customized to accommodate a specific requirement.

PSOMTCP Data Sheet

 

 

 

 

C-Band Transmit and Receive Circular R L Polarity OMT

C-Band Transmit and Receive Circular R L Polarity OMT

$699.98

Description: Ortho Mode Transducers (OMT) are available for various frequencies both "off-the-shelf" or customized to accommodate a specific requirement.

110079-1  3.625 - 4.200 5.850 - 6.425 CP 
114479-1  4.400 - 4.925 6.600 - 7.100 CP

 

C-Band Transmit and Receive Linear Polarity OMT

C-Band Transmit and Receive Linear Polarity OMT 

$549.98

Description: Ortho Mode Transducers (OMT) are available for various frequencies both "off the shelf" or customized to accommodate a specific requirement.

113824-5 OMT 17.70 - 22.20 LP 
114405-3 OMT 21.45 - 21.95 24.70 - 25.20 LP 

 

 

 

 

 

Ka-band OMT

Ka-band OMT

$369.98

Description: Ka-band OMT: compact OMT for Ka terminals (Rx 19.7-20.2 GHz; Tx 29.5-30.0 GHz). Includes Rx filter.

113527-12 Septum OMT 17.20 - 20.20 CP 
113527-13 Septum OMT 17.20 - 21.20 CP 
113527-16 Septum OMT 17.20 - 21.20 CP 
113527-17 Septum OMT 21.40 - 25.30 

 

 

 

Ka band Rx/Tx Waveguide

Ka band Rx/Tx Waveguide

$499.98

Description: Ka terminals (Rx 19.7-20.2 GHz; Tx 29.5-30.0 GHz). Includes Rx filter.

PSOMTCP Data Sheet

 

 

 

 

 

 

 

 

High Frequency OMT

High Frequency OMT

$1,200.00

Description: Phase shifting waveguide circular polarizer with a stable performance of the composite microwave dielectric materials with wide bandwidth, circular polarization axis polarization conversion performance than small. Particularly suitable for use in the millimeter wave band and the microwave band.

HFOMT Data Sheet

 

 

 

Ultra High Frequency OMT

Ultra High Frequency OMT

$3,195.00

Description: Phase shifting waveguide circular polarizer with a stable performance of the composite microwave dielectric materials with wide bandwidth, circular polarization axis polarization conversion performance than small. Particularly suitable for use in the millimeter wave band and the microwave band.

UHFOMT Data Sheet

 

 

 

 

 

 

 

X-Band WR112  Rx/Tx OMT

X-Band WR112  Rx/Tx OMT

$3,395.98

Description: X-Band WR112 Rx/Tx OM. Phase shifting waveguide circular polarizer with a stable performance of the composite microwave dielectric materials with wide bandwidth, circular polarization axis polarization conversion performance than small. Particularly suitable for use in the millimeter wave band and the microwave band.

PSOMTCP Data Sheet

 
 

K Band WR-42, 0.420" X 0.420" Antenna Port OMT

K Band WR-42, 0.420" X 0.420" Antenna Port OMT

$599.98

Description: K-Band WR42 OMT. Phase shifting waveguide circular polarizer with a stable performance of the composite microwave dielectric materials with wide bandwidth, circular polarization axis polarization conversion performance than small. Particularly suitable for use in the millimeter wave band and the microwave band.

PSOMTCP Data Sheet

 

 

 

 

Rotary Joint-Wikipedia

We offer an array of high quality waveguide rotary joints. The Joints can have both waveguide ports at a right angle to the rotational axis, "U-style", one waveguide port at a right angle and one in line, "L-style" or both waveguide ports in line. "I-style". Our Rotary Joints are ideal for use in weather radar systems & other applications. Our Rotating Joints can be single or multi-channel. Wave Guides - Interference Filters - Feedhorn Parts. ... U Style, Coaxial Rotary Joints, Dual Channel, Dual Channel Rotary Joints, F Style, I Style, L Style. Waveguide Rotary Joints - Waveguide Rotary Joints are meant to transmit energy from a stationary RF line to a rotating RF line. Composition of the channel can be divided into single, dual and multi-way rotary joint, the frequency range of products covering 2.6-40GH systems connected, according to the composition of the channel can be divided into single, dual and multi-way rotary.  Waveguide Rotary Joints - U, L and IL


 

 

 

Multiple waveguide rotary joint

Multiple waveguide rotary joint

$5,100.00

Description: Multiple waveguide rotary joint Low Insertion Phase stability Application Radar system, missile guidance, high-gain antenna and power synthesis system Other Technical Specifications Channel Isolation (dB) 50 Insertion (dB) 0.3(Min) VSWR (dB) 1.5(Max) Average Power (W) 600 Peak Power (KW) 600 Mechanical Specifications Material Al/Cu Finish silver/gold/nickel/ passification conductive oxide

MWRJ Data Sheet

 

Dual waveguide rotary joint

Dual waveguide rotary joint

$4,995.00

Description: Dual waveguide rotary joint We offer high-performance dual microwave waveguide rotary joint product, dimensions, flange, material, surface treatment and electrical index requirements can be customized according to user requirements. Feature Low Insertion Phase stability Application Radar system, missile guidance, high-gain antenna and power synthesis system Other Technical Specifications Channel Isolation (dB) 50 Insertion (dB) 0.3(Min) VSWR (dB) 1.3(Max) Average Power (W) 600 Peak Power (KW) 600 Mechanical Specifications Material Al/Cu Finish Silver//nickel/other Environmental Specifications Operating Temperature -55~+85

DWRJ360 Data Sheet

 

 

 

TM01 mode waveguide rotary joint

TM01 mode waveguide rotary joint

$1,600.00

Description: TM01 mode waveguide rotary joint has a "vertical rotational symmetry, phase stability," the characteristics.TM01 mode waveguide rotary joint has a "vertical rotational symmetry, phase stability," the characteristics. Feature Low Insertion Phase stability Application Radar system, missile guidance, high-gain Antenna and power synthesis system Other Technical Specifications Insertion (dB) 0.2 (Min) VSWR 1.3(Max) Freq. range (GHz) up to 40 Mechanical Specifications Material Al/Cu Finish Unplated, silver tin plate or other

TM01 Data Sheet

 

 

 

 

 

Single Channel Waveguide Rotary Joint - I Type

Single Channel Waveguide Rotary Joint - I Type

$1,400.00

Description: Single Channel Waveguide Rotary Joint --- I Type We odder a range of high-performance waveguide rotary joint products, mainly used in radar systems connected, according to the composition of the channel can be divided into single, dual and multi-way rotary joint, the frequency range of products covering 2.6-40GH Feature Low Insertion, High peak power Low cost Application Radar system, missile guidance, high-gain antenna and power synthesis system Other Technical Specifications Isolation (dB) 0.3(Min) VSWR 1.4(Max) Avg. Power(W) 600 (Max) Peak Power(KW) 600(Max) Mechanical Specifications Material Al/Cu Finish Unplated, silver tin plate or other. Environmental Specifications Operating Temperature -55~+85

3SCRJT1 Data Sheet

 

 

 

Single Channel Waveguide Rotary Joint - L Type

Single Channel Waveguide Rotary Joint - L Type

$1,200.00

Description: Single Channel Waveguide Rotary Joint --- L Type We odder a range of high-performance waveguide rotary joint products, mainly used in radar systems connected, according to the composition of the channel can be divided into single, dual and multi-way rotary joint, the frequency range of products covering 2.6-40GH Feature Low Insertion, High peak power Low cost Application Radar system, missile guidance, high-gain antenna and power synthesis system Other Technical Specifications Isolation (dB) 0.3(Min) VSWR 1.4(Max) Avg. Power (W) 600 (Max) Peak Power (KW) 600(Max) Mechanical Specifications Material Al/Cu Finish Unplated, silver tin plate or other. Environmental Specifications Operating Temperature -55~+85 WR137 and other flanges prices very please call

3SCRJLT Data Sheet

 

 

 

 

 

Single Channel Waveguide Rotary Joint - U Type

Single Channel Waveguide Rotary Joint - U Type

$799.98

Description: Single Channel Waveguide Rotary Joint --- U Type. We odder a range of high-performance waveguide rotary joint products, mainly used in radar systems connected, according to the composition of the channel can be divided into single, dual and multi-way rotary joint, the frequency range of products covering 2.6-40GH Feature Low Insertion, High peak power Low cost Application Radar system, missile guidance, high-gain antenna and power synthesis system Other Technical Specifications Isolation (dB) 0.3(Min) VSWR 1.4(Max) Avg. Power W) 600 (Max) Peak Power (KW) 600(Max) Mechanical Specifications Material Al/Cu Finish Unplated, silver tin plate or other. Environmental Specifications Operating Temperature -55~+85

SCRJUT Data Sheet

 

 

 

 

WR-75 ROTARY JOINT

WR-75 ROTARY JOINT

$1,500.00

Description: Waveguide Rotary Joint 1.70 - 18.00 GHz Performance Frequency. 1.20 Typical Max VSWR (VSWR varies with design) Multiple single channel designs available. Numerous Flange Configurations available. Aluminum (6061) or Copper WR Waveguide Available.

AMCRJ Data Sheet

 

 

 

 

WR-137 ROTARY JOINT

WR-137 ROTARY JOINT

$1,600.00

Description: Waveguide Rotary Joint Rotary Joint Designs 1.70 - 18.00 GHz Performance Frequency. 1.20 Typical Max VSWR (VSWR varies with design) Multiple single channel designs available. Numerous Flange Configurations available. Aluminum (6061) or Copper WR Waveguide Available.

CF-FA120 Data Sheet

 

 

 

 

 

U Style,Coaxial Rotary Joints, Dual Channel, Dual Channel Rotary Joints, F Style, I Style, L Style, Mounting Flange Configurations, rotary joints, rotary switches, couplers, comparators, terminations, mixers, windows, phase shift

Rotary Joints

$1,198.99

Description: U Style, Coaxial Rotary Joints, Dual Channel, Dual Channel Rotary Joints, F Style, I Style, L Style, Mounting Flange Configurations, rotary joints, rotary switches, couplers, comparators, terminations, mixers, windows, phase shifters and attenuators Call.

3SWGRJUT Data Sheet

 

 

 

WR75 Waveguide Rotary Joint

 

WR75 Waveguide Rotary Joint

$1,400.00

Description: Norsat WR75 WAVEGUIDE ROTARY JOINT U Style, Coaxial Rotary Joints, Dual Channel, Dual Channel Rotary Joints, F Style, I Style, L Style, Mounting Flange Configurations, rotary joints and more. Rotary switches, couplers, comparators, terminations, mixers, windows, phase shifters and attenuators. Waveguide Rotary Joints - U, L  and IL SHAPE

RJ-WR75-90 Data Sheet

 

 

 

 

 

Polarizers / Hybrids-Wikipedia

Polarizers / Hybrid - Linear-Circular Polarizers convert a linearly-polarized signal to a circularly-polarized signal (or vice versa) in a circular waveguide. They operate over a maximum bandwidth of 10% of the center frequency with a typical axial ratio of 1 dB. The polarizers can be connected to an orthomode transducer or circular-to-rectangular transition as applicable. They are available for various frequencies both "off-the-shelf" or customized to accommodate a specific requirement. Low insertion losses and VSWR, this component can be finished to meet your requirement. Phase shifting between transmission lines that feed a patch antenna array. Feed of the phased-array antennae the radiator element


 

 

 

Millimeterwave Circular Polarization Polarizer 

Millimeter wave Circular Polarization Polarizer 

$CALL

Description: Millimeter wave circular polarization Polarizer Dua-lband circular polarizations. Good isolation. Application Mobil satellite communications, etc. Technical Specifications Tx channel (vertical polartion) 20.4~22GHZRx Channel (horizontal polartion) 30.2~31.8GHZVSWR(dB) <1.5 Passband isolations >85dB Axial ratio for circular polarization <2dBMechanical Specifications Size (mm) 130*70

MMCPP Data Sheet

 

Linear Polarization Polarizer

Linear Polarization Polarizer

$1,200.00

Description: Linear Polarization Polarizer We offer a k-band satellite communications microwave network, the product has an excellent characteristics. Application Orthogonal polarizations Low insertion loss excellent polarization isolation Technical Specifications Tx channel (vertical polartion) 12.5~13GHZ Rx Channel (horizontal polartion) 14.25~14.75GHZ VSWR(dB) <1.3 Passband isolations >85dB Passband insertion loss <0.6dB Mechanical Specifications Size(mm) 130*170*8.

LPP Data Sheet

 

 

 

Circular Polarization Polarizer

Circular Polarization Polarizer

$799.00

Description: Circular Polarizer. We provide ku and ka-band circular polarizer, the product features a compact and has excellent indicators. Compact Excellent isolation Application Mobile satellite communications, etc Technical Specifications Operation frequency K and Ka Band Polarization Dual circular polarization switchable VSWR (dB) <1.5 Axial ratio for circular polarization <2dB Total insertion loss <0.7dB

CPP Data Sheet

 


 

L-Band Septum Polarizer 

L-Band Septum Polarizer 

$CALL

Description: L-Band orthomode junction (OMJ) and septum polarizer (SP) waveguide components for testing a deliverable L-Band device. This effort was undertaken due to the unavailability of these components in L-Band

LBSP Data Sheet

 
Millimeter Wave HPAs
With the broadest spectrum of millimeter wave uplink amplifiers available in the industry.
Advanced millimeter wave klystrons covering the 30-700 GHz range have made the transition into shorter wavelengths a viable option for radar and communications systems. 

 

Ka-Band
Q-Band
V-Band

 

Ka-band waveguide polarizer
Ka-band waveguide
polarizer

 

FERRITE DEVICE - ferrite waveguide devices such as Circulators, Switches or Isolators that range from WR284 up to WR28 standards. These devices are suited for applications where stability with temperature variations, pressurization and high power capability are requested.

Switches-Wikipedia

Waveguide RF switches are electromagnetic switches with hollow circular or rectangular cross-sections and are used for routing RF energy in microwave communications, broadcasting, and in radar applications. Waveguide switches can be used to transfer both power and communication signals, and the bandwidth of a waveguide is in relation to its size, and thus always referred to by its size (e.g. WR112, WR90, WR75 etc.). Compared to coaxial RF switches, waveguides can route extremely high power signals over a narrow bandwidth at low to high frequencies. Our Waveguide switches manufactured have proven to be reliable and to have long life. All switches covers the full recommended waveguide frequency range. Waveguide Detector Mounts (Tunable) - Waveguide Matched Detector Mount (Fixed)


 

Manual Waveguide Switch

Manual Waveguide Switch

$699.98

Description: Manual Waveguide Switch A series of rectangular waveguide switches, frequency range covers 2.6GHz-112GHz. Product Dimensions, flange form, materials, surface treatment and electrical parameters can be customized according to user requirements. Feature-Good Isolation -Lost cost Application- Radar system, missile guidance, high-gain antenna and power synthesis system -Other Technical Specifications Isolation (dB) 60(Typ.) Insertion (dB) 0.3(Min) VSWR (dB) 1.15(Typ.) Mechanical Specifications Material Al/Cu Finish Silver/gold/nickel/or custom Environmental Specifications Operating Temperature -55~+85

MWS Data Sheet

 

 

Electric Waveguide Switch

Electric Waveguide Switch

$1,999.00

Description: Electric Waveguide Switch D.C. Operated Double Ridge Waveguide Switches based on successful range of others switches. Feature Good Isolation Lost cost Application Radar, missile guidance, high-gain antenna and power synthesis system Other Technical Specifications Isolation (dB) 50 VSWR 1.2 Insertion (dB) 15% Switch Speed (ms) 60Mechanical Specifications Material Al/Cu Environmental Specifications Operating Temperature -55~+85

EWS Data Sheet

 

 

 

See: Hubs / Controllers

 

 

Electric High-Performance Waveguide Switch

Electric High-Performance Waveguide Switch

$CALL

Description: Electric high-performance Waveguide Switch series high-performance microwave waveguide switches, commonly used in the waveguide transmission system to change the signal path. Feature Good Isolation Lost cost Application Radar system, missile guidance, high-gain antenna and power synthesis system Other Technical Specifications Isolation (dB) 40(Typ.) Insertion (dB) 0.3(Min) VSWR (dB) 1.15(Typ.) Switch Speed (ms) ≤300 Mechanical Specifications Material Al/Cu Finish silver/gold/nickel/ passification conductive oxide and the like Environmental Specifications Operating Temperature -55~+85

EHPWS Data Sheet

 

 

 

33D-Series WR-62 (12.4-18.0 GHz)

33D-Series WR-62 (12.4-18.0 GHz)

$CALL

Description: Product Series 33D-Series Product Status Available Upon Request Switch Type SPDT Input 1 Output 2 Size WR-62 (12.4-18.0 GHz) Frequency 12.4-18.0 GHz Rf Direction Bidirectional Actuator Type Latching Self Cutoff Coil Voltage 28 Vdc Indicator Yes Switching Time 100 ms Mechanical Life (Cold-Switch) 200,000 Nominal Weight 1.3 lbs Operating Temperature 54c-to-84

33D-Series Data Sheet

 

 

 

Isolator-Wikipedia

We offer quality waveguide isolators in a flash! Our waveguide isolators are manufactured to our customer's specifications. Isolators are three-port circulators which transmit microwave energy between ports, while directing reflected energy to a port with an attached load. In many industrial heating applications, the isolator is used to protect the magnetron from moding or over-heating caused by the reflected energy.


 

 

High Power Waveguide Isolator

High Power Waveguide Isolator

$199.98

Description: High Power Waveguide Isolator We offer a line of Waveguide Isolators in various sizes and frequency bands. Reliability, cost and manufacturability are optimized at the design stage. Feature Low cost, Fast delivery
Application
For Feeder system and T&M Other Applications Technical Specifications Isolation (dB) 20(Typ.) Insertion Loss 0.3(Typ.) Bandwidth (MHZ) 800 Forward Power (w) 1000(Max) Mechanical Specifications Material Al/Cu Environmental Specifications Operating Temperature -40~+70(Typ.)

HPWI02 Data Sheet

 

 

Waveguide Isolator

Waveguide Isolator

$379.00

Description: Waveguide Isolator We offer a line of Waveguide Isolators in various sizes and frequency bands. Reliability, cost and manufacturability are optimized at the design stage. Feature Low cost, Fast delivery Application For T&M Other Applications Technical Specifications Freq. (GHZ) up to 27 Isolation (dB) 300(Max) Insertion Loss 0.4(Typ.) Bandwidth FULL Average Power (w) 200(Max) Mechanical specifications Material Al/Cu Environmental Specifications Operating Temperature -40~+70(Typ.)

WISO2 Data Sheet

 

Circulator-Wikipedia

Circulators are three or four-port waveguide components utilizing ferrite technology to selectively direct energy to a specific port based upon the direction of wave propagation. By placing a load on the port where reflected energy is directed, a three-port circulator can be made into an isolator. Support power levels up to 100kW for L-band and 30kW for S-band. Our circulators feature excellent insertion loss, high isolation and reliability, low VSWR, and a wide dynamic temperature range. These components are used in amplifier systems, radar systems, antenna transmitting/receiving, and in anything else that may require the prevention of any signal reflection.


 

Waveguide Circulator

Waveguide Circulator

$CALL

Description: Waveguide Circulator Microwave waveguide circulator system is mainly used for unidirectional transmission of energy, this one-way transmission capability to be able to make them work independently between stages microwave devices and systems level, isolated from each other. Feature Low cost, Fast delivery Application For T&M Other Applications Technical Specifications Isolation (dB) 20(Max) Insertion Loss 0.3(Min) Bandwidth (MHZ) FULL Average Power (w) 600(Max) Mechanical Specifications Material Al/Cu Environmental Specifications Operating Temperature -40~+55(Typ.)

WC716 Data Sheet

 

 

High-Power Waveguide Circulator

High-Power Waveguide Circulator

$499.98

Description: High-Power Waveguide Circulator We offer a range of high-performance standard rectangular waveguide ring products. Frequency range of products covering 2.1-16GHz Feature Low cost, Fast delivery Application For Feeder system and T&M Other applications Technical Specifications Isolation (dB) 20 (Typ.) Insertion Loss 0.3 (Typ.) Bandwidth (MHZ) 1500(Max) Average Power (W) 1000(Max) Mechanical Specifications Material Al/Cu Environmental Specifications Operating Temperature -40~+70℃(Typ.)

HPWC Data Sheet

 

 

Waveguide Feed Assembly- Wikipedia

Waveguide Assembly - We provide a wide array of custom waveguide assemblies that are designed, manufactured, and tested to customer specifications. We design and build various rectangular and circular waveguide assemblies, including couplers, feed, directional couplers, horns, adapters and straight-sections covering many RF frequency range.

Specialized in supplying complex waveguide networks that fit specific mechanical constraints set by the customer, in addition to RF and environmental requirements.


 

Waveguide Assembly CUSTOM

Waveguide Assembly

$CALL

Description: Waveguide Assembly - We provide a wide array of custom waveguide assemblies that are designed, manufactured, and tested to customer specifications. We design and build various rectangular and circular waveguide assemblies, including couplers, feed, directional couplers, horns, adapters and straight-sections covering many RF frequency range.

HPWIS1 Data Sheet

 

 

Waveguide Assembly

Waveguide Assembly

$3,100.00

Description: Waveguide Assembly - We provide a wide array of custom waveguide assemblies that are designed, manufactured, and tested to customer specifications. We design and build various rectangular and circular waveguide assemblies, including couplers, feed, directional couplers, horns, adapters and straight-sections covering many RF frequency range.

HPWI Data Sheet

 

 

 

 

Monopulse Comparators

Waveguide Feed Assembly

$7,800.00

Description: Waveguide Assembly - We provide a wide array of custom waveguide assemblies that are designed, manufactured, and tested to customer specifications. We design and build various rectangular and circular waveguide assemblies, including couplers, feed, directional couplers, horns, adapters and straight-sections covering many RF frequency range.

HPWSLV Data Sheet

 

 

 

Monopulse Comparators

Monopulse Comparators

$CALL

Description: Excellent phase and amplitude control to ensure deep nulls and minimal boresight shift with frequency. Dual polarization monopulses employing orthogonal transducers horizontal and vertical polarization in any antenna feed system. Matching polarizers to generate circular polarization are also available. AN/FPQ-6 All styles “I”, “U” and “L” or “F” both pressurized and unpressurized. MONOPULSE COMPARATORS - Monopulse Comparators for radar applications. We can offer custom solutions for peculiar electrical and mechanical requirements.

HPWSLV Data Sheet

 

 

 

Couplers- Wikipedia

Feed systems for high performance antenna systems at L/S/C/ X/Ka/Ku-band Frequency range across eight frequency bands. Available from 2.6 to 33GHz. Feed Systems Coupler, Monopulse Coupler. Waveguides that can be located directly behind the feedhorn. Multihole Directional Couplers - Multihole Directional couplers these are useful for sampling a part of microwave energy for monitoring purpose and for measuring reflections and impedance. Cross Directional Couplers - Power dividers and directional couplers - Instrument Grade  Systems Grade  Metrology Grade. We offer a wide range of couplers that cover may applications and price points. Multihole, Cross Guide, Branch Guide and custom designs are available for 2.6 to 33GHz Performance to 33 GHz for RF and microwave applications in radar, satellite communications (SATCOM), telecommunications, and wireless transmit-and-receive systems. . The couplers come in two physical configurations including "Crossguide" and "Broadwall" versions and come with either UG-style or CPR-style flanges. Crossguide Couplers
Dual Crossguide Couplers Loop Style Couplers


 

 

137 Crossguide Coupler

137 Crossguide Coupler

$300.00

Description: Crossguide Coupler Frequency 1.7 - 18 GHz 1.15 Typical VSWR SMA & Type N (Male or Female) Connectors Available. Mid-Band Nominal Coupling Values of 20-50 are standard. Standard Material Copper (OFHC) or Aluminum (6061) Waveguide 10-20DB of Directivity is Typical.

CGC Data Sheet

 

 

 

 

Dual Crossguide Coupler

Dual Crossguide Coupler

$600.00

Description: Crossguide Coupler Frequency 1.7 - 18 GHz 1.15 Typical VSWR SMA & Type N (Male or Female) Connectors Available. Mid-Band Nominal Coupling Values of 20-50 are standard. Standard Material Copper (OFHC) or Aluminum (6061) Waveguide 10-20DB of Directivity is Typical.

DCGC Data Sheet


 

 

 

 

Waveguide Cross Coupler

Waveguide Cross Coupler

$300.00

Description: Waveguide Cross Coupler --- W+C These waveguide couplers are very similar to coax couplers and are a basic microwave device used in most microwave systems, test sets and applications for monitoring RF power. Feature High coupling accuracy High Directivity High Reliability Application SatCom / Aerospace / Radar / ISM / SNG & Uplink Other Technical Specifications Freq. Range (GHz) up to 40G Directivity (dB) 18 (Typ) Coupling (dB) 30/40/50/60 Coupling Accuracy (dB) ±0.7 Freq. sensitivity (dB) ±1.0 Mechanical Specifications Material Al/Cu Environmental Specifications Operating Temperature -55~+85

WGCC Data Sheet

 

 

Waveguide Cross Coupler

Waveguide Cross Coupler

$190.00

Description: Waveguide Cross Coupler --- WL+C These waveguide couplers are very similar to coax couplers and are a basic microwave device used in most microwave systems, test sets and applications for monitoring RF power. Feature High coupling accuracy Freq. sensitivity Low VSWR Application SatCom / Aerospace / Radar / ISM / SNG & Uplink Other Technical Specifications Freq. Range (GHz) up to 40GHz Directivity (dB) 18( Typ) Coupling (dB) 30/40/50/60 Coupling Accuracy (dB) ±0.7 Freq. sensitivity (dB) ±1.0 Mechanical specifications Material Al/Cu Environmental Specifications Operating Temperature -55~+85

GCC Data Sheet

 

 

 

 

WR75 Multiple Crossguide Coupler

WR75 Multiple Crossguide Coupler

$1,000.00

Description: Multiple Crossguide Coupler - Multiple flange and coaxial connector types and configurations are available. Our loop Cross guide Directional Couplers Broadwall Multi-Hole Dual Arm Crossguide Couplers are offered for the frequency range of 2 to 110GHz

113059-07 Data Sheet

 

 

 

 

High Frqency Couplers

High Frequency Couplers

$349.00

Description: Crossguide Coupler Frequency 1 - 330 GHz 1.15 Typical VSWR SMA & Type N (Male or Female) Connectors Available. Mid-Band Nominal Coupling Values of 20-50 are standard. Standard Material Copper (OFHC) or Aluminum (6061) Waveguide 10-20DB of Directivity is Typical.

103831-01 Data Sheet

 

 

 

 

Ultra High Frequency Directional Coupler

Ultra High Frequency Directional Coupler

$379.98

Description: Waveguide Cross Coupler --- W+C These waveguide couplers are very similar to coax couplers and are a basic microwave device used in most microwave systems, test sets and applications for monitoring RF power. Feature High coupling accuracy High Directivity High Reliability Application SatCom / Aerospace / Radar / ISM / SNG & Uplink Other Technical Specifications Freq. Range (GHz) up to 40G Directivity (dB) 18 (Typ) Coupling (dB) 30/40/50/60 Coupling Accuracy (dB) ±0.7 Freq. sensitivity (dB) ±1.0 Mechanical Specifications Material Al/Cu Environmental Specifications Operating Temperature -55~+85

UHFDC2P Data Sheet

 

 

 

 

Ultra High Frequency Cross Coupler

Ultra High Frequency Cross Coupler

$CALL

Description: Waveguide Cross Coupler --- W+C These waveguide couplers are very similar to coax couplers and are a basic microwave device used in most microwave systems, test sets and applications for monitoring RF power. Feature High coupling accuracy High Directivity High Reliability Application SatCom / Aerospace / Radar / ISM / SNG & Uplink Other Technical Specifications Freq. Range (GHz) up to 40G Directivity (dB) 18 (Typ) Coupling (dB) 30/40/50/60 Coupling Accuracy (dB) ±0.7 Freq. sensitivity (dB) ±1.0 Mechanical Specifications Material Al/Cu Environmental Specifications Operating Temperature -55~+85

UHFCC10 Data Sheet

 

 

 

Ka-Band Directional Coupler

Ka-Band Directional Coupler

$450.00

Description: Waveguide Cross Coupler --- W+C These waveguide couplers are very similar to coax couplers and are a basic microwave device used in most microwave systems, test sets and applications for monitoring RF power. Feature High coupling accuracy High Directivity High Reliability Application SatCom / Aerospace / Radar / ISM / SNG & Uplink Other Technical Specifications Freq. Range (GHz) up to 40G Directivity (dB) 18 (Typ) Coupling (dB) 30/40/50/60 Coupling Accuracy (dB) ±0.7 Freq. sensitivity (dB) ±1.0 Mechanical Specifications Material Al/Cu Environmental Specifications Operating Temperature -55~+85 WR28

3KADC10 Data Sheet

 

X-Band Directional Coupler

X-Band Directional Coupler

$300.00

Description: Waveguide Cross Coupler --- W+C These waveguide couplers are very similar to coax couplers and are a basic microwave device used in most microwave systems, test sets and applications for monitoring RF power. Feature High coupling accuracy High Directivity High Reliability Application SatCom / Aerospace / Radar / ISM / SNG & Uplink Other Technical Specifications Freq. Range (GHz) up to 40G Directivity (dB) 18 (Typ) Coupling (dB) 30/40/50/60 Coupling Accuracy (dB) ±0.7 Freq. sensitivity (dB) ±1.0 Mechanical Specifications Material Al/Cu Environmental Specifications Operating Temperature -55~+85 UG52B/U

XBDC10 Data Sheet

 

 

 

 

Waveguide Cross Coupler WDCX

Waveguide Cross Coupler WDCX

$375.00

Description: Waveguide Cross Coupler --- WDCX These waveguide couplers are very similar to coax couplers and are a basic microwave device used in most microwave systems, test sets and applications for monitoring RF power. Feature High coupling accuracy Freq. sensitivity Low VSWR Application SatCom / Aerospace / Radar / ISM / SNG & Uplink Other Technical Specifications Freq. Range (GHz) up to 40GHz Directivity (dB) 18( Typ) Coupling (dB) 3/6/10/20/30/40/50/60 Coupling Accuracy (dB) ±0.9 Freq. sensitivity (dB) ±.9 Mechanical specificationsMaterial Al/Cu Environmental SpecificationsOperating Temperature -55~+85

WWGCC Data Sheet

 

 

 

 

Waveguide Cross Coupler WXC

Waveguide Cross Coupler WXC

$399.00

Description: Waveguide Cross Coupler --- WXC These waveguide couplers are very similar to coax couplers and are a basic microwave device used in most microwave systems, test sets and applications for monitoring RF power. Feature High coupling accuracy Freq. sensitivity Low VSWR Application SatCom / Aerospace / Radar / ISM / SNG & Uplink Other Technical Specifications Freq. Range (GHz) up to 40GHz Directivity (dB) 18( Typ) Coupling (dB) 3/6/10/20/30/40/50/60 Coupling Accuracy (dB) ±0.7 Freq. sensitivity (dB) ±.9 Mechanical specificationsMaterial Al/Cu Environmental SpecificationsOperating Temperature -55~+85

W1GCC Data Sheet

 

 

 

 

Waveguide Cross Coupler WUCX

Waveguide Cross Coupler WUCX

$349.98

Description: Waveguide Waveguide Cross Coupler --- WUCX These waveguide couplers are very similar to coax couplers and are a basic microwave device used in most microwave systems, test sets and applications for monitoring RF power. Feature High coupling accuracy Freq. sensitivity Low VSWR Application SatCom / Aerospace / Radar / ISM / SNG & Uplink Other Technical Specifications Freq. Range (GHz) up to 15GHz Directivity (dB) 18( Typ) Coupling (dB) 30/40/50/60 Coupling Accuracy (dB) ±0.9 Freq. sensitivity (dB) ±.7 Mechanical specifications Material Al/Cu Environmental Specifications Operating Temperature -55~+85

W2GCC Data Sheet

 

 

 

Waveguide High Directional Coupler WCX

Waveguide High Directional Coupler WCX

$599.99

Description: Waveguide High Directional Coupler --- WCX We offer Waveguide directional couplers in a variety of configurations, covering a full frequency range with multiple flange and coaxial connector types. Feature Flat Frequency Response High coupling accuracy Freq. sensitivity Low VSWR Application SatCom / Aerospace / Radar / ISM / SNG & Uplink Other Technical Specifications Freq. Range (GHz) up to 40GHz Directivity (dB) 30( Typ) Coupling (dB) 3/6/10/20/30/40/50/60 Coupling Accuracy (dB) ±0.9 Freq. sensitivity (dB) ±.7 Mechanical specifications Material Al/Cu Environmental Specifications Operating Temperature -55~+85

WG3CC Data Sheet

 

 

 

 

 

 

Waveguide High Directional Coupler WC

Waveguide High Directional Coupler WC

$399.98

Description: Waveguide High Directional Coupler --- WC We offer Waveguide directional couplers in a variety of configurations, covering a full frequency range with multiple flange and coaxial connector types. Feature High coupling accuracy Good Freq. sensitivity Low VSWR Application SatCom / Aerospace / Radar / ISM / SNG & Uplink Other Technical Specifications Freq. Range (GHz) up to 110GHz Directivity (dB) 30(Typ) Coupling (dB) 3/6/10/20/30/40/50/60 Coupling Accuracy (dB) ±0.9 Freq. sensitivity (dB) ±.7/±.9 Mechanical specifications Material Al/Cu Environmental Specifications Operating Temperature -55~+85

WG4CC Data Sheet

 

 

 

 

Waveguide Coupler Probe

Waveguide Coupler Probe

$299.98

Description: Waveguide Coupler Probe We provide series high-performance waveguide probe coupler waveguide systems commonly used in power testing. These couplers are perfect to use with our complete line of RF amplifiers and are compatible with any test applications you may have. Feature High Performance Good Directivity Low VSWR Application SatCom / Aerospace / Radar / ISM / SNG & Uplink Other Technical Specifications Freq. Range up to 112G Directivity (dB) 15~30Typ. Coupling (dB) 3~60Typ Mainline VSWR(dB) 1.1 Mechanical Specifications Material Al/Cu Environmental Specifications Operating Temperature -55~+85

W6GCC Data Sheet

 

 

 

Waveguide Loop Coupler WDH

Waveguide Loop Coupler WDH

$600.00

Description: WR187 Waveguide Loop Coupler --- WDH We offer Waveguide looped couplers in a variety of configurations, covering a full frequency range with multiple flange and coaxial connector types. Feature High coupling accuracy Good Freq. sensitivity Low VSWR Application SatCom / Aerospace / Radar / ISM / SNG & Uplink Other Technical Specifications Freq. Range (GHz) up to 40GHz Directivity (dB) 15( Typ) Coupling (dB) 30/40/50/60 Coupling Accuracy (dB) ±0.9 Freq. sensitivity (dB) ±.7 Mechanical specifications Material Al/Cu Environmental Specifations Operating Temperature -55~+85

WG66CC Data Sheet

 

 

 

Waveguide Loop Coupler - WHC

Waveguide Loop Coupler - WHC

$499.00

Description: Waveguide Loop Coupler --- WHC We offer Waveguide directional couplers in a variety of configurations, covering a full frequency range with multiple flange and coaxial connector types. Feature High coupling accuracy Good Freq. sensitivity Low VSWR Application SatCom / Aerospace / Radar / ISM / SNG & Uplink Other Technical Specifications Freq. Range (GHz) up to 40GHz Directivity (dB) 15(Typ) Coupling (dB) 30/40/50/60 Coupling Accuracy (dB) ±0.9 Freq. sensitivity (dB) ±.7/±.9 Mechanical specifications Material Al/Cu Environmental Specifations Operating Temperature -55~+85

WGCC Data Sheet

 

 

 

 

 

Cross Guide Directional Coupler

Cross Guide Directional Coupler

$348.99

Description: Coax port options 2.6 to 330GHz 3 or 4 Ports Low Power Load 1.70 - 40.0 GHz Performance Frequency. 1.25 Typical Max VSWR (VSWR varies with design) Power ratings can vary with design. Multiple Design lengths available. Numerous Flange Configurations available. Aluminum (6061) or Copper Waveguide Available. Contact Us for available options.

LP2L Data Sheet

 

 

 

 

 

 

Branch Guide Directional Couplers

Branch Guide Directional Couplers

$298.00

Description: Compact Design Full and Narrow Band options 2.6 to 40GHz Flexible Only Seamless Waveguide 1.70 - 40.00 GHz Performance Frequencies Seamless Corrugated Brass High Power Application Numerous Flange Configurations available. Flange material can be Brass or Aluminum (6061) Standard Finish is Flat Black Paint on Seamless Flex Additional Finish available upon request.

LPL Data Sheet

 

 

 

Custom Directional Coupler

 

Custom Directional Coupler

$399.98

Description: Branch Guide Double and Triple Cross Guide Dual Multihole

L4PL Data Sheet

 

 

 

Multihole Directional Coupler

 

Multi-hole Directional Coupler

$350.00

Description: Metrology Grade 2.6 to 40GHz Branch Guide 46 to 50dB directivity Double and Triple Cross Guide Dual Multihole

L6PL Data Sheet

 

 

 

 

 

 

 

Loop Style Coupler

Loop Style Coupler

$700.00

Description: Loop Style Coupler 1.70 - 15.00 GHz Frequency Standard VSWR 1.10 20% Operational Band Width Standard Material Copper or Aluminum Waveguide (6061) Double Ridge Couplers - Flat Coupling Response

L5C Data Sheet

 

 

 

Loop Style Coupler

Loop Style Coupler 

$599.98

Description: Loop Style Coupler 1.70 - 15.00 GHz Frequency Standard VSWR 1.10 20% Operational Band Width Standard Material Copper or Aluminum Waveguide (6061) 2 to 40GHz - 40dB directivity

L4C Data Sheet

 

 

 

 

 

 

 

Ultra High Frequency Directional Couplers

Ultra High Frequency Directional Couplers

$400.00

Description: Ortho Mode Transducers (OMT) are available for various frequencies both "off-the-shelf" or customized to accommodate a specific requirement

 

Ku - Tracking Coupler 

$CALL

Description: wide range of couplers that cover may applications and price points. Multihole, Cross Guide, Branch Guide, Loop Style Couplers and custom designs are available for 2.6 to 330GHz

111935-02 10.70 - 18.40 Data Sheet
111935-03 13.395 - 15.225
Data Sheet

 

 

 

Ultra High Frequency Directional Couplers

Ultra High Frequency Directional Couplers

$579.00

Description: Ortho Mode Transducers (OMT) are available for various frequencies both "off-the-shelf" or customized to accommodate a specific requirement

 

WR62 Coupler

$799.98

Description: wide range of couplers that cover may applications and price points. Multi-hole, Cross Guide, Branch Guide, Loop Style Couplers and custom designs are available for 2.6 to 330GHz

103830-1 Coupler WR62 Data Sheet

 

 

 

Ka-Band Tracking Coupler

Ka-Band Tracking Coupler

$CALL

Description: Our tracking feeds and coupler are designed with low T11 Coupling and high in T21 Coupling. Available with high power handling and low PIM compliance, this components have, as standard, low VSWR and isolation losses.

110335-02 Data Sheet

 

Directional Coupler

Directional Couplers

$CALL

Description: Use in commercial, this directional coupler utilizes branch guide coupling techniques to simultaneously provide small package size and tight coupling values. Constructions is in WR75 waveguide. Other frequencies and coupling values are available. Please contact our engineering staff with your requirements

DCWR752 Data Sheet

 

Power Couplers - Power couplers provide the vacuum and thermal interface between the evacuated super conducting cavity, which is typically kept at 4 K, and the room temperature waveguide components. Power couplers transmit microwaves generated by the high-power microwave source, typically a klystron. Power couplers must be extraordinarily clean and reliable to ensure that they meet the stringent requirements of superconducting accelerators. 

 

 

Power Combiners-Wikipedia

Available for various frequencies both "off-the-shelf" or customized to accommodate a specific requirement.. High-efficiency, bi-directional spatial power combiner amplifier. In this combiner, a two-dimensional array of amplifiers is illuminated from a feed.

RF Decks 
Standalone TWT RF amplifier decks (i.e., without a power supply) can be provided
The RF chain is completely configured to your requirements. 

Frequency Coverage:
•2.0 to 8.0 GHz for output power up to 500 watts
•6.5 to 18.0 GHz for output power up to 400 watts

Features:
•Power combining two to four TWTs for higher power output 
•Customized to your requirements
•Power output levels in excess of 500 watts typical
•Rapid switching between two to four RF output ports (option)
•CW, pulsed or dual-mode operation
•Cooling options: air-cooled or liquid-cooled
•115V 3 phase 400 Hz input power
•Fully qualified to MIL-E-5400 environment


 

 

Ku-Band Power Combiner

Ku-Band Power Combiner

$4,800.00

Description: The signals must be coherent, that is, they must be at the exact same frequency, and close in phase and amplitude. Being at the same frequency is not an issue when you are combining power amplifiers, because the signals started out from the same source before you split it.

111975-08 Power Combiner 13.75 - 14.50 
111975-15 Power Combiner 10.95 - 12.75 
112769-01 Power Combiner 10.95 - 12.75 

 

 

 

Ka-Band Power Combiner

Ka-Band Power Combiner

$5,700.00

Description: Waveguide power combiners offers custom power combining configurations, including, but not limited to, 2-way, 3-way, 4-way, 6-way and 8-way combiners. Integral phase matching structures enable optimum power combining efficiency when combining multiple power amplifiers or signal sources.

112769-02 Power Combiner 10.70 - 12.75 
112769-11 Power Combiner 10.70 - 12.75 

 

Diplexer Frequency Combiner

Diplexer Frequency Combiner

$7,200.00

Description: Diplexer Frequency Combiner - Provide a low loss way to combine two channels into a single antenna. They have two input ports and a single output port. These diplexers are the building block of multiplexers. By cascading “n” diplexers, “n+1” channels can be combined into a single output. Units can be designed to meet specific power, frequency and configuration requirements. Features Extensive range of bands: C, extended C, X, Ku, extended Ku, DBS, extended DBS, Ka, and Q. 
Power levels up to 10 kW

DFCNT Data Sheet

 

 

WAVEGUIDE POWER LIMITER

WAVEGUIDE POWER LIMITER

$CALL

Description: Diplexer Frequency Combiner - Provide a low loss way to combine two channels into a single antenna. They have two input ports and a single output port. These diplexers are the building block of multiplexer. By cascading “n” diplexers, “n+1” channels can be combined into a single output. Units can be designed to meet specific power, frequency and configuration requirements. Features Extensive range of bands: C, extended C, X, Ku, extended Ku, DBS, extended DBS, Ka, and Q. 
Power levels up to 10 kW

WGPL-15 Data Sheet


Filters-Wikipedia-Wikipedia-Wikipedia

Our bandpass filters are available in ten waveguide bands covering a wide frequency. High out-of-band rejection can suit customer-specific attenuation characteristics. Available "off-the-shelf" or customized, our filters are designed for various frequencies with high isolation, low VSWR and low insertion losses. Also available in Low-PIM and high power models, these components can be finished in accordance with MIL and FED standards. C-Band Ka-Band K-Band Ku-Band X-Band X-Ku-Band.


C-Band Bandpass Waveguide Filter

C-Band Bandpass Waveguide Filter

$299.98

Description: Bandpass Waveguide Filter Our series of High Pass filters provides high rejection levels and steep skirt selectivity for frequencies above the band edge or corner frequency. Feature-low insertion loss 2015-6-10 9:32:16 -wide rejection band Application Phased array radar, missile guidance, high-gain antenna and power synthesis system 2015-6-10 9:32:16 Other Technical Specifications Isolation (dB) 60 Insertion (dB) 0.3 VSWR (dB) 1.2(Max) Mechanical Specifications Material Al/Cu Environmental Specifications Operating Temperature -55~+85

BPWF Data Sheet

 

Ku-Band Waveguide Harmonic Filter

Ku-Band Waveguide Harmonic Filter

$279.00

Description: Waveguide harmonic filter Our filters provide high rejection levels and steep skirt selectivity for frequencies above the band edge or corner frequency. Feature-Low insertion loss Wide rejection band Application Missile guidance, high-gain antenna and power synthesis system. Other Technical Specifications Isolation (dB) 60 Insertion loss 0.3 VSWR (dB) 1.2(Max) Mechanical Specifications Material Al/Cu Environmental Specifications Operating Temperature -55~+85

WGHF Data Sheet

 

C-Band Terrestrial interference Filter

TI - Interference Filter

$398.00

Description: Waveguide bandpass filter is installed between a TVRO feedhorn and the LNA or LNB to suppress strong out-of-Band interference. Radar Elimination Filter These highly-selective receive filters eliminate potential interference from WiMAX. 7894D / 7893D / 11383 Series – Copper MFC16709 Terrestrial Interference Filter,  Ku Band Bandpass Filter (
10.95 - 12.75GHz)

7894D Data Sheet

 

 

Terrestrial Interference Filter

C-Band Terrestrial interference Filter

$399.98

Description: Model 7893D (7894D) C-band bandpass filter. In-Stock. C-Band Interference Elimination Filters. C Band Terrestrial Interference Filter Passband: 11.7 - 12.2 GHz. Insertion Loss: 0.5dB Max. Reject Bands: 14.0 - 14.5 GHz and 10.55 - 10.68 GHz. Ku Band Terrestrial Interference Filter WaveGuide Filter - In-Line Filter - WR75.WR137,Custom

7893D Data Sheet

 

 

 

High Pass Waveguide Filter

High Pass Waveguide Filter

$699.98

Description: High Pass Waveguide Filter We offer HP series High Pass filters provides high rejection levels and steep skirt selectivity for frequencies above the band edge or corner frequency. Feature-low insertion loss -wide rejection band Application- Phased array radar, missile guidance, high-gain antenna and power synthesis system - Other Technical Specifications Isolation (dB) 60 Insertion (dB) 0.3 VSWR (dB) 1.2(Max) Mechanical Specifications Material Al/Cu Environmental Specifications Operating Temperature -55~+85

HPWF Data Sheet

 

 

Low Pass Waveguide Filter

Low Pass Waveguide Filter

$549.97

Description: Low Pass Waveguide Filter Our series of Low Pass filters provides high rejection levels and steep skirt selectivity for frequencies above the band edge or corner frequency. Feature low insertion loss 2015-6-10 9:32:16 wide rejection band Application Phased array radar, missile guidance, high-gain antenna and power synthesis system 2015-6-10 9:32:16 Other Technical Specifications Isolation (dB) 60 Insertion loss 0.3 VSWR (dB) 1.2(Max) Mechanical Specifications Material Al/Cu Environmental Specifications Operating Temperature -55~+

LPWF Data Sheet

 

 

 

Ti-Filter Satellite Communications Waveguide Filter

Ti-Filter Satellite Communications Waveguide Filter

$300.00

Description: Satellite communications waveguide filter Applicable band have C, X, Ku and Ka-band, is widely used in satellite communication systems, radar systems and microwave measurement systems, customized according to customer special requirements. Feature- Low VSWR, low insertion loss, high rejection low cost, High reliability Application- Satellite communications Other Technical Specifications Waveband Ka/Ku/X/C Isolation (dB) 30 Insertion (dB) 0.3 VSWR (dB) 1.2 Mechanical Specifications Material Al/Cu Environmental Specifations: Operating Temperature -55

HPWF Data Sheet

 

 

 

Waveguide Filters

 Waveguide Filters

$1,200.00

Description: Mode Filter, Cavity Filter, Harmonic Rejection Filter and Interference Suppression Filter. TI Filter Feedhorn wave filters and more, please call for custom filters fast turnaround time. Model 7893D (7894D) C-band bandpass filter. In-Stock. C-Band Interference Elimination Filters. C Band Terrestrial Interference Filter Passband: 11.7 - 12.2 GHz. Insertion Loss: 0.5dB Max. Reject Bands: 14.0 - 14.5 GHz and 10.55 - 10.68 GHz. Ku Band Terrestrial Interference Filter WaveGuide Filter - In-Line Filter - WR75.WR137,Custom 

7893HF Data Sheet

 

MFC 13961 C-Band Interference Elimination Filter

MFC 13961 C-Band Interference Elimination Filter

$349.00

Description: Ideal for eliminating interference from WiMAX, RADAR and virtually any other potential source of out-of-band interference. The model 13961W combines innovative design techniques with the solid performance of its renowned predecessor (model 13961) Utilizing a durable and true one piece body/flange construction, the 13961W is shipped with hardware & gasketing and is ready to install between the feedhorn and the LNB/LNA.

MFC-13961 Data Sheet

 

 

 

Interference Elimination Filter Extended C Band

Interference Elimination Filter Extended C Band

$599.98

Description: Interference Elimination Filter Extended C-Band. Model 13962. Passband Frequency range: 3.625~4.8 GHz. Waveguide bandpass filter is installed between a TVRO feedhorn and the LNA or LNB to suppress strong out-of-Band interference. Radar Elimination Filter These highly-selective receive filters eliminate potential interference from WiMAX. 7894D / 7893D / 11383 Series

MFC-13962 Data Sheet

 

 

Terrestrial Interference Filter

MFC 13961 C-Band Interference Elimination Filter

$399.99

Description: Available "off-the-shelf" or customized, our filters are designed for various frequencies with high isolation, low VSWR and low insertion losses.

Also available in Low-PIM and high power models, these components can be finished in accordance with MIL and FED standards.

110798-1 Filter, Tx Reject 3.625 - 4.200 
111517-1 Filter, Tx Reject 4.500 - 4.800 
114079-1 Filter, Low Pass 5.850 - 6.425 
114195-10 Filter, Tx Reject 3.500 - 4.400 
114195-11 Filter, Tx Reject 3.400 - 4.800 
114353-4 Filter, Bandpass 4.425 - 4.525 
114353-5 Filter, Bandpass 4.7250 - 4.825 
114703-1 Filter, Bandstop 3.400 - 4.200 

 

 

 

Terrestrial Interference Filter

MFC 13961 C-Band Interference Elimination Filter 

$399.99

Description: Available "off-the-shelf" or customized, our filters are designed for various frequencies with high isolation, low VSWR and low insertion losses.

Also available in Low-PIM and high power models, these components can be finished in accordance with MIL and FED standards.

114195-11 Filter, Tx Reject 3.400 - 4.800 
114353-4 Filter, Bandpass 4.425 - 4.525 
114353-5 Filter, Bandpass 4.7250 - 4.825 
114703-1 Filter, Bandstop 3.400 - 4.200 

 

 

High Performance C-band Interference Elimination Filter

High Performance C-band Interference Elimination Filter

$400.00

Description: High Performance C-band Interference Elimination Filter. Model 7894D. Passband 3.7~4.2 GHz. Eliminates marine navigational radar frequencies (2.9~3.65 GHz) and airport altimeters band (4.25~4.40 GHz, that affect receiving channels on satellite dishes..

7894D Data Sheet

 

 

 

Extended Terrestrial interference Filter C Band

Extended Terrestrial interference Filter C Band

$549.00

Description: Extended C Band Radar Elimination Filter Model 11383.  Waveguide bandpass filter is installed between a TVRO feedhorn and the LNA or LNB to suppress strong out-of-Band interference. Radar Elimination Filter These highly-selective receive filters eliminate potential interference from WiMAX. 7894D / 7893D / 11383 Series

11383 Data Sheet

 

 

 

 

 

 

Terrestrial Interference Filter

Radar Elimination Filter C Band

$395.00

Description: MFC Radar Elimination Filter C Band. Series 13961

MFC-13961 Data Sheet

 

 

Terrestrial Interference Filter

Radar Elimination Filter C Band 

$395.00

Description: Radar Elimination Filter C Band WiFi Series 7893D Compatible with digital LNB's. Less than 6 inches

7893D Data Sheet

 

 

 

 

Ku-Band Interference Elimination Filter

Ku-Band Interference Elimination Filter

$649.00

Description: Available "off-the-shelf" or customized, our filters are designed for various frequencies with high isolation, low VSWR and low insertion losses. Also available in Low-PIM and high power models, these components can be finished in accordance with MIL and FED standards.

111196-1 Data Sheet

 

 

KU-BandTerrestrial interference Ti - Filter 

KU-Band Terrestrial interference Ti - Filter 

$279.99

Description: Model 7893D (7894D) C-band bandpass filter. In-Stock. C-Band Interference Elimination Filters. C Band Terrestrial Interference Filter Passband: 11.7 - 12.2 GHz. Insertion Loss: 0.5dB Max. Reject Bands: 14.0 - 14.5 GHz and 10.55 - 10.68 GHz. Ku Band Terrestrial Interference Filter WaveGuide Filter - In-Line Filter - WR75.WR137,Custom.

111196-2 Data Sheet

 

 

 

 

 

LOW KU-Band Filter

LOW KU-Band Filter

$499.98

Description: Available "off-the-shelf" or customized, our filters are designed for various frequencies with high isolation, low VSWR and low insertion losses.

101423-01 Filter, Lowpass 12.40 - 18.00 
109058-01 Filter, Lowpass 10.70 - 12.75 
109058-04 Filter, Lowpass 10.70 - 12.75 
109058-08 Filter, Lowpass 10.70 - 12.75 
109058-09 Filter, Lowpass 10.70 - 12.75 
109058-15 Filter, Lowpass 10.70 - 12.75 
109058-17 Filter, Lowpass 10.70 - 12.75 
110120-04 Filter, Bandpass 13.75 - 14.50 
110120-07 Filter, Bandpass 13.75 - 14.50 
110120-14 Filter, Bandpass 13.75 - 14.60

 

 

 

FULL KU-Band Filter

FULL KU-Band Filter

$600.00

Description: Also available in Low-PIM and high power models, these components can be finished in accordance with MIL and FED standards.

110344-01 Filter, Bandpass 13.75 - 14.50 
110344-03 Filter, Bandpass 13.75 - 14.50 
111960-01 Filter, Lowpass 10.70 - 12.75 
111960-07 Filter, Lowpass 10.70 - 12.75 
111960-17 Filter, Lowpass 10.70 - 12.75 
111960-18 Filter, Lowpass 10.70 - 12.75 
113093-01 Filter, Bandpass 10.70 - 11.75 
113282-01 Filter, Bandpass 13.75 - 14.50 
113590-01 Filter, Bandpass 15.28 - 15.38 
113906-01 Filter, Lowpass 10.70 - 12.80 
114080-01 Filter, Lowpass 

 

 

 

Ka-Band Filter

Ka-Band Filter

$399.98

Description:  Waveguide bandpass filter is installed between a TVRO feedhorn and the LNA or LNB to suppress strong out-of-Band interference. Radar Elimination Filter These highly-selective receive filters eliminate potential interference from WiMAX. 7894D / 7893D / 11383 Series

111196-1 Filter, Bandpass 31.60 - 32.20 
112844-2 Filter, Highpower 34.20 - 34.70 

 

 

 

K-Band Filter

K-Band Filter

$479.00

Description: Available "off-the-shelf" or customized, our filters are designed for various frequencies with high isolation, low VSWR and low insertion losses.

114803-1 Filter, Highpass 24.70 - 25.30 
114804-1 Filter, Lowpass 21.40 - 22.00

 

 

 

 

X-Band Filter

X-Band Filter

$599.00

Description: Available "off-the-shelf" or customized, our filters are designed for various frequencies with high isolation, low VSWR and low insertion losses.

11009-01 OMT 7.25 - 7.75 7.90 - 8.40 LP 

 

 

 

 

 

Septum

Septum

$649.00

Description: Septum available "off-the-shelf" or customized, our filters are designed for various frequencies with high isolation, low VSWR and low insertion losses.

112841-01 OMT 7.25 - 7.75 7.90 - 8.40 CP 
112841-15 OMT 7.25 - 7.75 7.90 - 8.40 CP 
112841-28 OMT 7.25 - 7.75 7.90 - 8.40 CP 
114509-02 OMT 7.25 - 7.75 7.90 - 8.40 CP 
114509-04 OMT 7.25 - 7.75 7.90 - 8.40 CP 

 

 

 

Norsat Pass Filter C Band

Norsat Pass Filter C Band

$469.00

Description: Norsat Pass Filter C Band Series: BPF-C-1 and BPF-C-2

BPF-C-1 Data Sheet

 

Terrestrial Interference Filter

Isolators & Circulators

$279.98

Description: RF SMA to WR90 Pole Filter - Cavity Filters - Pre-selector Filters - Lumped Element Filter

BPF-C-2 Data Sheet

 

 

 

 

 

Flexible Waveguide-Wikipedia

Flexible Twistable Waveguide- Used in requirements where both bending and twisting of the Waveguide is needed. They cover the entire frequency range, over ten waveguide bands - made in Brass and Beryllium alloys. Rigid waveguide and Flange configurations - dual band, tri-band, Custom Flange and Lengths Available. We offer The largest selection of Flexible and Twistable waveguide in Flexible Twistable Waveguides - Water-Cooled Flexible Waveguide - Armored Flexible Waveguide - Flexible Only Seamless Wave guides - Armored Seamless Flexible - Elliptical Flexible Waveguide-  Elliptical flexible waveguide  Gold Plated Rectangular - Corrosion Resistant and more. Used in applications such as Uplink and Down link - Mobile Satellite Systems - Satellite Imagery (Remote Sensing) Systems - Portable, High Gain Systems - Remote Monitoring Stations - Calibration Equipment - Satellite News Gathering (SNG) Systems.


 

WR-137 Flexible 12" Inch Length

 

WR-137 Flexible 12" Inch Length

$239.98

WR-137 Flexible 24" Inch Length

$269.99

Description: WR137 Flexible Waveguide Twistable Length: 12-24 inches Neoprene Jacket Flange Material: Brass Flange Type: F1: CPR Grooved (CPRG), F2: CPR Grooved (CPRG) Flange Finish: Unplated Irridited

Flexible Waveguide Data Sheet

 

 

WR-75 Flexible 12" Inch Length

 

WR-75 Flexible 12" Inch Length

$239.99

WR-75 Flexible 24" Inch Length

$269.99

Description: WR75 Flexible Waveguide Twistable Length: 12-24 inches Neoprene Jacket Flange Material: Brass Flange Type: F1: Cover, F2: Cover with O-Ring Groove. Includes hardware kit. Flange Finish: Unplated Irridited

WR-75 Flexible Data Sheet

 

 

 

 

WR-137 Flexible 36" Inch Length

 

WR-137 Flexible 36" Inch Length

$399.98

WR-137 Flexible 48" Inch Length

$499.98

Description: WR137 Flexible Waveguide Twistable Length: 36-48 inches Neoprene Jacket Flange Material: Brass Flange Type: F1: CPR Grooved (CPRG), F2: CPR Grooved (CPRG) Flange Finish: Unplated Irridited.

Flexible Waveguide Data Sheet

 

 

 

WR-75 Flexible 36" Inch Length

 

WR-75 Flexible 36" Inch Length

$299.98

WR-75 Flexible 48" Inch Length

$439.98

Description: WR75 Flexible Waveguide Twistable Length: 36-48  inches Neoprene Jacket Flange Material: Brass Flange Type: F1: CPR Grooved (CPRG), F2: CPR Grooved (CPRG) Flange Finish: Unplated Irridited.

WR-75 Flexible Data Sheet

 

 

 

 

C-Band Flexible 72" Inch

 

C-Band Flexible 72" Inch

$679.99

C-Band Flexible 120" Inch 

$1,249.00

Description: WR137 Flexible Waveguide Twistable Length: 72-148  inches Call on 12 foot and longer. Neoprene Jacket Flange Material: Brass Flange Type: F1: CPR Grooved (CPRG), F2: CPR Grooved (CPRG) Flange Finish: Unplated Irridited.

Flexible Waveguide Data Sheet

 

 

 

Ku-Band Flexible 72" Inch

 

Ku-Band Flexible 72" Inch

$599.98

Ku-Band Flexible 120" Inch

$1,200.00

Description: WR75 Flexible Waveguide Twistable Length: 72-148  inches Call on 12' foot and longer. Neoprene Jacket Flange Material: Brass Flange Type: F1: CPR Grooved (CPRG), F2: CPR Grooved (CPRG) Flange Finish: Unplated Irridited.

Flexible Waveguide Data Sheet

 

Flex Bend and Custom Flexible Waveguide

Flex Bend and Custom Flexible Waveguide

$579.00

Description: All Bands and All Sizes C-Band Flexible Waveguide, 3 Feet WR-137 One Flange Grooved - One Flange Flat.

Flexible Waveguide Data Sheet

 

 

 

Custom long Length and Flange Flexible Waveguide

Custom long Length and Flange Flexible Waveguide

$CALL

Description: All Bands and All Sizes C-Band Flexible Waveguide, 3 Feet WR-137 One Flange Grooved - One Flange Flat.

Flexible Waveguide Data Sheet

 

 

 

 

36" X-Band Flexible Waveguide

36" X-Band Flexible Waveguide

$399.98

Description: All Flange types.X-Band K-Band Ku-Band Ka-Band X-Band WR75 C130  Flexible Waveguide, 6 Inch 1 foot 3 foot feet WR-137 One Flange Grooved - One Flange Flat or grooved

Flexible Waveguide Data Sheet


 

36" Ka-Band Flexible Waveguide

36" Ka-Band Flexible Waveguide

$369.98

Description: All Bands and All Sizes C-Band Flexible Waveguide, 3 Feet WR-75 One Flange Grooved - One Flange Flat.

Flexible Waveguide Data Sheet

 

 

 

See: Custom Built

 

See: Feedhorns

 

 

Elliptical Flexible Waveguide

Elliptical Flexible Waveguide

$399.98

Description: Elliptical Flexible Waveguide - elliptical flexible waveguide cover the frequency range of 2.2 to 20 GHz. Good air tightness. Lower overall mass and lower profile. Gas tight joints. Low insertion loss. High corrosion resistance Application Radar, SATCOM, Aviation, Communications, ISM and other. 

Elliptical-WG Data Sheet

 

Seamless No Twist Flexible Waveguide

Seamless No Twist Flexible Waveguide

$250.00

Description: Seamless Flexible Waveguide - efficient low cost means of making measurements Elliptical Flexible Waveguide- elliptical flexible waveguide cover the frequency range of 2.2 to 20 GHz. 

Flexible Seamless Data Sheet

 

 

 

 

Water-Cooled Flexible Waveguide

Water-Cooled Flexible Waveguide

$CALL

Description: Water-Cooled Flexible Waveguide - water-cooled flexible waveguide are built with high precision and then gold plated for low insertion loss and high corrosion resistance

Flexible Waveguide Data Sheet

 

 

Armored Flexible Rectangular Waveguide

Armored Flexible Rectangular Waveguide

$389.90

Description: Millimeter 6 Inch WR34 Armored Flexible Rectangular Waveguide - armored flexible rectangular waveguide encased in armored jacket. It keep contaminants out and provide an efficient seal at pressures.

 

 

 

Flexible Only Seamless Waveguide 

Flexible Only Seamless Waveguide 

$250.00

Description: Flexible Only Seamless Waveguide 1.70 - 40.00 GHz Performance Frequencies Seamless Corrugated Brass High Power Application Numerous Flange Configurations available. Flange material can be Brass or Aluminum (6061) Standard Finish is Flat Black Paint on Seamless Flex Additional Finish available upon request.

Flexible Seamless Data Sheet

 

 

 Inch Flexible Waveguide

 Ku-Band by the Inch Flexible Waveguide

$26.95 per inch

 C-Band by the Inch Flexible Waveguide

$26.95 per inch

Description: By the Inch Flexible Waveguide - flexible waveguide are built with high precision and then gold plated for low insertion loss and high corrosion resistance

WR75 Flexible Data Sheet

 

 

 

C-Band Flexible Waveguide

C-Band Flexible Waveguide

$CALL

Description: C-Band CPR-137G Twisted Flexible Waveguide C-Band CPR-137G Twisted Flexible Waveguide WR137 Twistable/ Flexible Waveguide Flange Type: F1: CPR 137 Grooved (CPRG), F2: CPR137 Grooved (CPRG), with Thru Holes. Neoprene Jacket, Flange Material: Brass, Unplated, Irridited & Polished Mounting Hardware .5ft long to 12ft WR137 Flexible Waveguide Twistable Length: 36 inches Neoprene Jacket Flange Material: Brass Flange Type: F1: CPR Grooved (CPRG), F2: CPR Grooved (CPRG) Flange Finish: Unplated Irridited. The WR 137 measures 1.372x.622 

WR75 Flexible Data Sheet

 

 

Ku-Band Flexible Waveguide

Ku-Band Flexible Waveguide

$CALL

Description: Ku-Band WR-75 Twisted Flexible Waveguide 3feet WR75 M1640-08-36-N-06-18-U WR75 Flexible Waveguide, Twistable, Length: 36 IN, Neoprene Jacket, Flange Material: Brass, Flange Type: F1: Cover, F2: Cover with O-ring groove, Flange Finish: Unplated Irridited & Polished .5-12 feet WR75 M1640-08-48-N-06-18-U WR75 Flexible Waveguide

WR75 Flexible Data Sheet

 

 

 

Diplexer - Triplexer - Quadriplexer-Wikipedia

One of our most popular product is our Diplexers, Triplexers and Quadriplexers fixed or tunable they are known to have high isolation and low insertion losses. Low VSWR and group delay, these components are available for various frequencies and polarization- linear or CP; X-Pol or Co-Pol (2-Port Models). Off-the-shelf and customized models are available and can be supplied with standard feed horns. Diplexers can be designed with higher power handling using adequate heat dissipation and can be finished to meet your needs. Coax Fixed Diplexers - Tunable Diplexer


 

Insat C Band 2 ports Diplexer (Circular POL) INSAT C BAND

Intelsat C Band 2 ports Diplexer (Circular POL) INSAT C BAND

$3,700.00

Description: C band 2-Port Diplexer Technical Specifics Operating Frequency, GHz TX RX Standard 5.85-6.425GHz 3.625-4.2GHz Extend 5.85-6.725GHz 3.4-4.2GHz Polarization Linear/Circular Linear/Circular Axial Ratio (Circular-Polarized) 1.06:11.06:1Insertion Loss, dB =0.25dB =0.25dB Interface CPR137F CPR229F VSWR 1.25:1 1.25:1 Tx Power Capability, KW 5KW Isolation, Tx to Rx, dB =85dB Tx/Tx Rx/Rx Linear,dB =30dB Tx/Tx Rx/Rx Circular,dB =85dB

INTC2P Data Sheet

 

 

 

Intelsat C Band 4 ports Diplexer (Circular POL)

Intelsat C Band 4 ports Diplexer (Circular POL)

$5,400.00

Description: C band 4-Port Diplexer Technical Specifics Operating Frequency, GHz TX RX Standard 5.85-6.425GHz 3.625-4.2GHz Extend 5.85-6.725GHz 3.4-4.2GHz Polarization Linear/Circular Linear/Circular Axial Ratio (Circular-Polarized) 1.06:11.06:1Insertion Loss, dB =0.25dB =0.25dB Interface CPR137F CPR229F VSWR 1.25:1 1.25:1 Tx Power Capability, KW 5KW Isolation, Tx to Rx, dB =85dB Tx/Tx Rx/Rx Linear,dB =30dB Tx/Tx Rx/Rx Circular,dB =85dB

INTC4P Data Sheet

 

 

 

Standard C Band 2 port Diplexer (Circular POL)

Standard C Band 2 port Diplexer (Circular POL)

$3,250.00

Description: C band 2-Port Diplexer Technical Specifics Operating Frequency, GHz TX RX Standard 5.85-6.425GHz 3.625-4.2GHz  Polarization Circular/Circular Circular/Circular Axial Ratio (Circular-Polarized) 1.06:11.06:1Insertion Loss, dB =0.25dB =0.25dB Interface CPR137F CPR229F VSWR 1.25:1 1.25:1 Tx Power Capability, KW 5KW Isolation, Tx to Rx, dB =85dB Tx/Tx Rx/Rx - Tx/Tx Rx/Rx Circular,dB =85dB

SCB2P Data Sheet

 

Standard C Band 4 port Diplexer (Circular POL)

Standard C Band 4 port Diplexer (Circular POL)

$5,495.00

Description: C band 4-Port Diplexer Technical Specifics Operating Frequency, GHz TX RX Standard 5.85-6.425GHz 3.625-4.2GHz  Polarization Circular/Circular Circular/Circular Axial Ratio (Circular-Polarized) 1.06:11.06:1Insertion Loss, dB =0.25dB =0.25dB Interface CPR137F CPR229F VSWR 1.25:1 1.25:1 Tx Power Capability, KW 5KW Isolation, Tx to Rx, dB =85dB Tx/Tx Rx/Rx - Tx/Tx Rx/Rx Circular,dB =85dB

SCB4P Data Sheet

 

 

 

Standard C Band 2 port Diplexer (Linear POL)

Standard C Band 2 port Diplexer (Linear POL)

$3,099.00

Standard C Band 2 port Diplexer (RX Only Circular POL)

$3,395.00

Description: C band 2-Port Diplexer Technical Specifics Operating Frequency, GHz TX RX Standard 5.85-6.425GHz 3.625-4.2GHz Polarization Linear/Linear Axial Ratio  1.06:11.06:1Insertion Loss, dB =0.25dB =0.25dB Interface CPR137F CPR229F VSWR 1.25:1 1.25:1 Tx Power Capability, KW 5KW Isolation, Tx to Rx, dB =85dB Tx/Tx Rx/Rx Linear,dB =30dB Tx/Tx Rx/Rx 

SLB2P Data Sheet

 

 

C Band 4 port Diplexer (Linear POL)

Standard C Band 4 port Diplexer (Linear POL)

$6,495.00

Standard C Band Diplexer (RX Only Linear POL)

$2,800.00

Description: C band 2-Port Diplexer Technical Specifics Operating Frequency, GHz TX RX Standard 5.85-6.425GHz 3.625-4.2GHz Polarization Linear/Linear Axial Ratio  1.06:11.06:1Insertion Loss, dB =0.25dB =0.25dB Interface CPR137F CPR229F VSWR 1.25:1 1.25:1 Tx Power Capability, KW 5KW Isolation, Tx to Rx, dB =85dB Tx/Tx Rx/Rx Linear,dB =30dB Tx/Tx Rx/Rx 

SLB4P Data Sheet

 

 

 

Extended C Band 2 port Diplexer (Circular POL)

Extended C Band 2 port Diplexer (Circular POL)

Extended C Band 2 port Diplexer (Linear POL)

Extended C Band 2 port Diplexer (RX Only Linear POL)

$CALL  

Description: C band 2-Port Diplexer Technical Specifics Operating Frequency, GHz TX RX Standard 5.85-6.425GHz 3.625-4.2GHz Extend 5.85-6.725GHz 3.4-4.2GHz Polarization Linear/Circular Linear/Circular Axial Ratio (Circular-Polarized) 1.06:11.06:1Insertion Loss, dB =0.25dB =0.25dB Interface CPR137F CPR229F VSWR 1.25:1 1.25:1 Tx Power Capability, KW 5KW Isolation, Tx to Rx, dB =85dB Tx/Tx Rx/Rx Linear,dB =30dB Tx/Tx Rx/Rx Circular,dB =85dB

ECB2PD Data Sheet

 

 

Extended C Band 4 port Diplexer

Extended C Band 4 port Diplexer (Circular POL)

Extended C Band 4 port Diplexer (Linear POL) EXTENDED C BAND

Extended C Band 4 port Diplexer (RX Only Circular POL)

$CALL  

Description: C band 4-Port Diplexer Technical Specifics Operating Frequency, GHz TX RX Standard 5.85-6.425GHz 3.625-4.2GHz Extend 5.85-6.725GHz 3.4-4.2GHz Polarization Linear/Circular Linear/Circular Axial Ratio (Circular-Polarized) 1.06:11.06:1Insertion Loss, dB =0.25dB =0.25dB Interface CPR137F CPR229F VSWR 1.25:1 1.25:1 Tx Power Capability, KW 5KW Isolation, Tx to Rx, dB =85dB Tx/Tx Rx/Rx Linear,dB =30dB Tx/Tx Rx/Rx Circular,dB =85dB

ECB4PBD Data Sheet

 

 

 

Standard Ku Band 2 port Diplexer (Linear POL)

Standard Ku Band 2 port Diplexer (Linear POL)

$2,795.00

Standard Ku-Band Diplexer     (Circular POL)

$3,195.00  

Description: Ku band 2-Port Diplexer Technical Specifics Operating Frequency, GHz TX RX Standard 14.0-14.5GHz 12.25-12.75GHz Extend 13.75-14.5GHz 10.75-12.75Ghz Polarization Linear Linear Insertion Loss, dB =0.25dB =0.25dB Interface WR75 WR75 VSWR 1.25:1 1.25:1 Tx Power Capability, KW 1KW Isolation, Tx to Rx, dB =85dBu. Circular Polarity options.

KUD2P Data Sheet
KUD2PC
Data Sheet

 

 

Ku-band Waveguide Diplexer

Ku-band Waveguide Diplexer

$CALL

Description: Rx Passband 10.95 to 12.75 GHz Tx Passband 13.75 to 14.5 GHz Rx Passband Insertion Loss at Bandedge 0.35 dB max Tx Passband Insertion Loss at Bandedge 0.25 dB max Passband Return Loss (all ports) 1.25 : 1 max Rejection from 10.95 to 12.75 GHz 35 dB min Rejection from 13.75 to 14.5 GHz 70 dB min Flanges WR 75 MICROWAVE COMPONENT KU-BAND WAVEGUIDE DIPLEXER TYPICAL SPECIFICATIONS WGD-001

WGD-001 Data Sheet

 

 

Ku Band 3-Port Diplexer, 112788-1 Series

Ku Band Diplexer, 17104 Series

$634.94

Description: Utilizing high "Q" bandpass filter components to isolate the transmit and receive feeds, this diplexer is compatible with most standard, extended and super-extended Ku-band applications. Ku Band Diplexer Highband (Tx Port): 13.75 - 14.50 GHz (Uplink) Insertion Loss: 0.25 dB Typ from 13.75 - 14.50 GHz Return Loss: 23 dB Typ from 13.75 - 14.5 Ghz Rejection: 65 dB Typ / 55 dB Min from 10.7 - 12.75 GHz Power Rating (CW): 500 Watts Max Lowband (Rx Port): 10.70 - 12.75 GHz (Downlink) ◦Insertion Loss: 0.20 dB Typ from 10.70 - 12.75 GHz Return Loss: 23 dB Typ from 10.70 - 12.75 GHz Rejection: 90 dB Typ / 80 dB Min from 13.75 - 14.5 GHz Flanges: WR75 Cover

17104 Data Sheet

 

 

 

 

Ku Band Diplexer, 19418

Ku Band Diplexer, 19418 Series

$669.98

Ku Band 3-Port Diplexer, 112788-1 Series

$2,390.00

Description: Rx/Rx diplexer incorporated highly selective bandpass filter components to achieve outstanding isolation between uplink & downlink feeds in the wider, super-extended Ku-band. Ku Band Diplexer Highband (Tx Port): 13.75 - 14.50 GHz (Uplink) ?Insertion Loss: 0.25 dB Typ from 13.75 - 14.50 GHz ?Return Loss: 23 dB Typ from 13.75 - 14.5 Ghz ?Rejection: 80 dB Typ @ 12.75 GHz / 85 dB Min @ 11.70 GHz Lowband (Rx Port): 10.70 - 12.75 GHz (Downlink) ?Insertion Loss: 0.2 dB Typ from 10.70 - 12.75 GHz ?Return Loss: 21 dB Typ from 10.70 - 12.75 GHz ?Rejection: 75 dB Typ @ 13.75 GHz / 80 dB Min @ 14.10 GHz Flanges ?UBR120 (Tx Port) UBR120 (Rx Port) PBR120 (Antenna Port)

19418 Data Sheet
10.95 - 11.70 GHz 112788-1
Data Sheet
11.45 - 12.20 GHz (112788-2 Model)
12.00 - 12.50 GHz (112788-3 Model)
12.20 - 12.75 GHz (112788-4 Model)

 

 

Extended Ku Band 4 Port Diplexer, 112132-1 Series

Extended Ku Band 4 Port Diplexer, 112132-1 Series

$CALL

Description: DIP-GF-112132-1 Ku Band 4 Port Diplexer Linear Polarization Tx Ports: 13.75 - 14.50 GHz (Uplink) Insertion Loss: 0.35 dB VSWR: 1.25:1 Max Rx Ports: 10.70 - 12.75 GHz (Downlink) Insertion Loss: 0.50 dB VSWR: 1.25:1 Max Cross Pol: 35 dB Min Power Handling: 2 kW CW (1 kW Per Tx Port) Low High

112132-1 Data Sheet

 

Standard Ku Band 4 port Diplexer (Linear POL)

Standard Ku Band 4 port Diplexer (Linear POL)

$4,100.00

Description: Ku band 4-Port Diplexer Technical Specifics Operating Frequency, GHz TX RX Standard 14.0-14.5GHz 12.25-12.75GHz Extend 13.75-14.5GHz 10.75-12.75Ghz Polarization Linear Linear Insertion Loss, dB =0.25dB =0.25dB Interface WR75 WR75 VSWR 1.25:1 1.25:1 Tx Power Capability, KW 1KW Isolation, Tx to Rx, dB =85dB Tx/Tx Rx/Rx Linear,dB =30dB

KUD4P Data Sheet

 

 

Lower Ku Band 2 ports Diplexer (Linear CO-POL)TX:12.905-13.250, RX:10.75-10.76

Extended Ku Band 2 port Diplexer (Linear POL)

Lower Ku Band 2 ports Diplexer (Linear CO-POL)TX:12.905-13.250, RX:10.75-10.76

$CALL  

Description: Ku band 4-Port Diplexer Technical Specifics Operating Frequency, GHz TX RX Standard 14.0-14.5GHz 12.25-12.75GHz Extend 13.75-14.5GHz 10.75-12.75Ghz Polarization Linear Linear Insertion Loss, dB =0.25dB =0.25dB Interface WR75 WR75 VSWR 1.25:1 1.25:1 Tx Power Capability, KW 1KW Isolation, Tx to Rx, dB =85dB Tx/Tx Rx/Rx Linear,dB =30dB

EKUD2P Data Sheet
ELKUD2P
Data Sheet

 

 

 

Extended Ku-Band Diplexer (RX Only Linear POL)

Extended Ku Band 4 port Diplexer (Linear POL)

Extended Ku-Band Diplexer (RX Only Linear POL)

$CALL  

Description: Diplexers from 1-40 Ghz for the commercial, military. A full array of standard filters and diplexers is available for the various commercial and military frequency bands. Many are "off the shelf products". Custom designed filters and diplexers for specific customer applications are available.

EKUD4P Data Sheet
EKUD4PR
Data Sheet

 

 

X/Ka-Band Diplexer (X/Ka)

 X/Ka-Band Diplexer (X/Ka)
Multi, Mixed and Dual Band Diplexer

$7,800.00

Description: X/Ka-Band Diplexer 2, 3 and 4-Port Multi-Band waveguide filters and diplexers from 1-40 Ghz for the commercial, military. A full array of standard filters and diplexers is available for the various commercial and military frequency bands. Many are "off the shelf products". Custom designed filters and diplexers for specific customer applications are available.

XCASPD Data Sheet

 

 

DBS Band Diplexer (Linear POL)

DBS Band Diplexer (Linear POL)

$6,595.00

Description: DBS band 2-Port Diplexer CO-POL and cross-POL Technical Specifics Operating Frequency, GHz RX TX 10.75-12.75GHz 17.3-18.4GHz Polarization Linear Linear Insertion Loss, dB =0.25dB =0.25dB Interface WR75 WR62 VSWR 1.25:1 1.25:1 Tx Power Capability, KW 1KW Isolation, Tx to Rx, dB =85dB DBS band 4-Port Diplexer Technical Specifics Operating Frequency, GHz RX TX 10.75-12.75GHz 17.3-18.4GHz Polarization Linear Linear Insertion Loss, dB =0.25dB =0.25dB Interface WR75 WR62 VSWR 1.25:1 1.25:1 Tx Power Capability, KW 1KW Isolation, Tx to Rx, dB =85dB Tx/Tx Rx/Rx, dB =35dB

DBSD2P Data Sheet

 

 

Custom Mixed, Multi and Dual Band Diplexer (X/Ka/DBS)

Custom Mixed, Multi and Dual Band Diplexer (X/Ka/DBS)

$CALL  

Custom Mixed Band Diplexer (C/Ku)C/Ku  Dual Band

Description: Waveguide filters and diplexers from 1-40 Ghz for the commercial, military. A full array of standard filters and diplexers is available for the various commercial and military frequency bands. Many are "off the shelf products". Custom designed filters and diplexers for specific customer applications are available.

KUKAD2P Data Sheet

 

 

Mixed Band 4 port Diplexer (Circular Pol Mixed-Band)

Mixed Band 4 port Diplexer (Circular Pol Mixed-Band)

$CALL  

Mixed Band 2 port Diplexer (Cicular POL) Mixed Band

Description: Feeds covering C, X, Ku, S, L, DBS, V, W, Q, Ka and Multi Band / Tri-Band Transmit Receive Feedhorns. Filters and diplexers from 1-40 Ghz for the commercial, military. A full array of standard filters and diplexers is available for the various commercial and military frequency bands. Many are "off the shelf products". Custom designed filters and diplexers for specific customer applications are available.

CKUDB4P Data Sheet

 

 

 

Multi-Band and Complex Custom Feed and OMT Assemblies

Multi-Band and Complex Custom Feed and OMT Assemblies

$CALL  

Description: Rx Passband 10.95 to 12.75 GHz Tx Passband 13.75 to 14.5 GHz Rx Passband Insertion Loss at Bandedge 0.35 dB max Tx Passband Insertion Loss at Bandedge 0.25 dB max Passband Return Loss (all ports) 1.25 : 1 max Rejection from 10.95 to 12.75 GHz 35 dB min Rejection from 13.75 to 14.5 GHz 70 dB min Flanges WR 75 MICROWAVE COMPONENT KU-BAND WAVEGUIDE DIPLEXER TYPICAL SPECIFICATIONS OMTCF

DPXMTCF Data Sheet

 

 

Custom Feed and OMT Assemblies

Custom Feed and OMT Assemblies

$CALL  

Description: Custom antenna feeds covering C, X, Ku, S, V, W, Q and Ka bands. The devices in these assemblies are precision machined from aluminum or copper and offer very high performance at a very competitive price. Each device is tuned to meet exacting electrical specifications. Additionally, entire feeds are assembled and tuned as a whole to provide superior performance compared to individually assembled components that are not tuned as a unit. We can provide either complete feeds or standalone devices.

OMTCF Data Sheet

 

 

C-Band - Diplexer

C-Band - Diplexer

$CALL

Description: One of our most popular product, our diplexers are known to have high isolation and low insertion losses. Low VSWR and group delay, these components are available for various frequencies and polarization- linear or CP; X-Pol or Co-Pol (2-Port Models).

Off-the-shelf and customized models are available and can be supplied with standard feed horns. Diplexers can be designed with higher power handling using adequate heat dissipation and can be finished to meet your needs.

112244-1   2-Port Diplexer   
112244-11 2-Port Diplexer  
112500-04 2-Port Diplexer
112500-05 2-Port Diplexer  
112900-39 2-Port Diplexer

 

 

 

C-Band Low Insertion Loss - Diplexer

C-Band Low Insertion Loss - Diplexer

$CALL

Description: One of our most popular product, our diplexers are known to have high isolation and low insertion losses. Low VSWR and group delay, these components are available for various frequencies and polarization- linear or CP; X-Pol or Co-Pol (2-Port Models).

Off-the-shelf and customized models are available and can be supplied with standard feed horns. Diplexers can be designed with higher power handling using adequate heat dissipation and can be finished to meet your needs.


114130-6   2-Port Diplexer
114130-7   2-Port Diplexer
114130-8   2-Port Diplexer
114130-9   2-Port Diplexer 
114480-13 2-Port Diplexer

 

 

 

C-Band High isolation - Diplexer

C-Band High isolation - Diplexer

$CALL

Description: One of our most popular product, our diplexers are known to have high isolation and low insertion losses. Low VSWR and group delay, these components are available for various frequencies and polarization- linear or CP; X-Pol or Co-Pol (2-Port Models).

112900-4   4-Port Diplexers
112900-13 4-Port Diplexers
112900-26 4-Port Diplexers
112900-31 4-Port Diplexers
112900-33 4-Port Diplexers
112900-41 4-Port Diplexers
112900-45 4-Port Diplexers

 

C-Band - Diplexer

C-Band - Diplexer

$CALL

Description: One of our most popular product, our diplexers are known to have high isolation and low insertion losses. Low VSWR and group delay, these components are available for various frequencies and polarization- linear or CP; X-Pol or Co-Pol (2-Port Models).


113700-12 4-Port Diplexers
114480-1   4-Port Diplexers
114480-4   4-Port Diplexers
114480-7   4-Port Diplexers
114480-14 4-Port Diplexers
114480-18 4-Port Diplexers
114480-19 4-Port Diplexers

 

 

Ku-Band - Diplexer

Ku-Band - Diplexer

$CALL

Description: One of our most popular product, our diplexers are known to have high isolation and low insertion losses. Low VSWR and group delay, these components are available for various frequencies and polarization- linear or CP; X-Pol or Co-Pol (2-Port Models).

Off-the-shelf and customized models are available and can be supplied with standard feed horns. Diplexers can be designed with higher power handling using adequate heat dissipation and can be finished to meet your needs.


110190-02 11.45 - 12.20 13.75 - 14.50 
110960-03 12.20 - 12.75 13.75 - 14.50 
111422-01 2-port 10.70 - 12.75 17.30 - 18.40 LP 
112080-01 2-port 10.70 - 12.75 13.75 - 14.50 LP 
112080-02 2-port 10.70 - 12.75 13.75 - 14.50 LP 
112080-03 2-port 10.70 - 12.75 13.75 - 14.50 LP 
112080-14 2-port 10.70 - 12.75 13.75 - 14.50 LP 
112080-24 2-port 10.95 - 12.75 13.75 - 14.50 LP 
112125-09 2-portr 10.70 - 12.75 13.75 - 14.50 LP 
112125-17 2-port 10.95 - 12.75 13.75 - 14.50 LP 
112125-27 2-port 10.95 - 12.75 13.75 - 14.50 LP 
112129-01 70 - 12.75 13.75 - 14.50 
112129-03 10.70 - 12.75 13.75 - 14.50 
112129-06 10.70 - 12.75 13.75 - 14.50 
112358-01 2-port 10.70 - 12.75 17.30 - 18.40 LP 
112433-01 2-port 10.70 - 12.75 13.75 - 14.50 copol 

 

 

 

 

Ku-Band High isolation - Diplexer

Ku-Band High isolation - Diplexer

$CALL

Description: One of our most popular product, our diplexers are known to have high isolation and low insertion losses. Low VSWR and group delay, these components are available for various frequencies and polarization- linear or CP; X-Pol or Co-Pol (2-Port Models).

Off-the-shelf and customized models are available and can be supplied with standard feed horns. Diplexers can be designed with higher power handling using adequate heat dissipation and can be finished to meet your needs.


112652-05 2-port 11.70 - 12.75 13.75 - 14.80 CP 
112846-01 2-port 10.70 - 12.75 13.75 - 14.50 LP 
112846-19 2-port 0.70 - 12.75 13.00 - 14.50 LP 
113223-05 13.39 13.74 14.66 - 14.79 
113448-04 2-port 13.39 - 13.74 14.66 - 14.79 CP 
113947-6   2-port 10.70 - 12.75 17.30 - 18.40 CP 
112788-00 3-Portr 0.95 - 12.75 13.75 - 14.50 LP 
110045-01 4-Port 10.70 - 11.70 12.75 - 14.5 LP 
110045-23 4-Port 10.70 - 11.75 12.75 - 14.5 LP 
110230-19 4-Port 11.70 - 12.70 17.30 - 18.10 LP 
110230-26 4-Port 10.70 - 12.75 17.30 - 18.40 LP 
111185-01 4-Portr 10.70 - 12.75 17.30 - 18.40 LP 
111185-03 4-Portr 10.70 - 12.75 17.30 - 18.40 LP 
112132-01 4-Port 10.70 - 12.75 13.75 - 14.50 LP 
112132-02 4-Port 10.70 - 12.75 13.75 - 14.50 LP 


 

 

 

Ku-Band  Low Insertion Loss - Diplexer

Ku-Band  Low Insertion Loss - Diplexer

$CALL

Description: One of our most popular product, our diplexers are known to have high isolation and low insertion losses. Low VSWR and group delay, these components are available for various frequencies and polarization- linear or CP; X-Pol or Co-Pol (2-Port Models)


112132-21 4-Port 10.70 - 12.75 13.75 - 14.50 LP 
112215-01 4-Port 10.70 - 12.20 12.75 - 14.50 LP 
112215-02 4-Port 10.70 - 12.20 12.75 - 14.50 LP 
112215-05 4-Port 10.70 - 12.20 12.75 - 14.50 LP 
112275-02 4-Port 10.70 - 12.75 13.00 - 14.50 LP 
112275-08 4-Port 10.70 - 12.75 13.00 - 14.50 LP 
112314-01 4-Portr 10.70 - 12.50 12.75 - 14.50 LP 
112314-02 4-Port 10.70 - 12.50 12.75 - 14.50 LP 

   

 

Ku-Band High isolation - Diplexer

Ku-Band High isolation - Diplexer

$CALL

Description: One of our most popular product, our diplexers are known to have high isolation and low insertion losses. Low VSWR and group delay, these components are available for various frequencies and polarization- linear or CP; X-Pol or Co-Pol (2-Port Models)

112314-06 4-Port 10.70 - 12.50 12.75 - 14.80 LP 
112314-18 4-Port 10.70 - 12.50 12.75 - 14.50 LP 
112780-00 4-Port 10.95 - 11.70 13.75 - 14.50 LP 
114023-02 4-Port 10.70 - 12.75 14.50 - 14.70 CP 
114023-05 4-Port 10.70 - 12.75 13.75 - 14.50 CP 
114023-09 4-Port 10.70 - 12.75 13.75 - 14.80 CP 
114227-16 6-Port 10.70 - 12.50 12.75 - 18.40 LP 
114227-21 6-Port 10.70 - 12.75 13.00 - 18.40 LP

 

 

 

 

 

Ka-Band Diplexer

Ka-Band Diplexer

$CALL

Description: One of our most popular product, our diplexers are known to have high isolation and low insertion losses. Low VSWR and group delay, these components are available for various frequencies and polarization- linear or CP; X-Pol or Co-Pol (2-Port Models).

112244-1  2-Port 18.40 - 20.10 28.30 - 30.40 CP 
112244-11 2-Port 17.70 - 20.20 27.50 - 31.00 CP 
112500-04 2-Port 19.70 - 21.20 29.50 -31.00 CP 
112500-05 2-Port 19.70 - 21.20 29.50 -31.00 CP 
112900-39 2-Port 19.20 - 20.40 28.90 - 30.10 CP 
 

 

 

 

Ka-Band Low Insertion Loss - Diplexer

Ka-Band Low Insertion Loss - Diplexer

$CALL

Description: One of our most popular product, our diplexers are known to have high isolation and low insertion losses. Low VSWR and group delay, these components are available for various frequencies and polarization- linear or CP; X-Pol or Co-Pol (2-Port Models).

114130-6 2-Port  19.70 - 21.20 29.50 - 31.00 CP 
114130-7  2-Port  19.70 - 21.20 29.50 - 31.00 CP 
114130-8  2-Port  19.70 - 21.20 29.50 - 31.00 CP 
114130-9  2-Port  19.70 - 21.20 29.50 - 31.00 CP 
114480-13 2-Port 19.20 - 21.20 29.00 - 31.00 CP

 

 

 

 

Ka-Band High isolation - Diplexer

Ka-Band High isolation - Diplexer

$CALL

Description: One of our most popular product, our diplexers are known to have high isolation and low insertion losses. Low VSWR and group delay, these components are available for various frequencies and polarization- linear or CP; X-Pol or Co-Pol (2-Port Models).

112900-4 4-Port  19.70 - 21.20 29.50 - 31.00 CP 
112900-13 4-Port 19.70 - 21.20 29.50 - 31.00 CP 
112900-26 4-Port 19.70 - 21.20 29.50 - 31.00 CP 
112900-31 4-Port 17.80 - 19.30 27.60 - 29.10 CP 
112900-33 4-Port 17.70 - 20.20 27.50 - 31.00 CP 
112900-41 4-Port 18.30 - 21.20 28.40 - 31.00 CP 
112900-45 4-Port 18.15 - 20.20 29.25 - 30.00 CP 
113700-12 4-Port 17.70 - 22.00 27.00 - 31.00 CP

 

 

Ka-Band - Diplexer

Ka-Band - Diplexer

$CALL

Description: One of our most popular product, our diplexers are known to have high isolation and low insertion losses. Low VSWR and group delay, these components are available for various frequencies and polarization- linear or CP; X-Pol or Co-Pol (2-Port Models).

114480-1 4-Port  19.20 - 21.20 29.00 - 31.00 CP 
114480-4 4-Port  19.20 - 21.20 29.00 - 31.00 CP 
114480-7 4-Port  17.75 - 19.35 27.55 - 29.15 CP 
114480-14 4-Port 19.20 - 21.20 29.00 - 31.00 CP 
114480-18 4-Port 19.20 - 21.20 29.00 - 31.00 CP 
114480-19 4-Port 19.20 - 21.20 29.00 - 31.00 CP 

 

 

See: Feedhorns See: Custom Built
 

K-Band - Diplexer

K-Band - Diplexer

$CALL

Description: One of our most popular product, our diplexers are known to have high isolation and low insertion losses. Low VSWR and group delay, these components are available for various frequencies and polarization- linear or CP; X-Pol or Co-Pol (2-Port Models).

113089-9 2-Port 23.00 - 23.55 25.25 - 27.50 LP 
113292-2 2-Port 22.55 - 23.55 25.25 - 27.50 Copol 
113824-9 2-Port 17.90 - 22.20 LP 
113953-6 2-Port 19.20 - 22.20 CP 
113953-7 2-Port 17.70 - 22.20 CP\LP 
113953-9 2-Port 17.60 - 22.20 CP 
113089-8 4-Port 21.45 - 21.95 24.70 - 25.20 LP


 

X/Ku-Band - Diplexer

X/Ku-Band - Diplexer

$CALL

Description: One of our most popular product, our diplexers are known to have high isolation and low insertion losses. Low VSWR and group delay, these components are available for various frequencies and polarization- linear or CP; X-Pol or Co-Pol (2-Port Models).

112766-05 4-Port 7.25 - 7.75 10.70 - 12.75

 

 

X-Band - Diplexer

X-Band - Diplexer

$CALL

Description: One of our most popular product, our diplexers are known to have high isolation and low insertion losses. Low VSWR and group delay, these components are available for various frequencies and polarization- linear or CP; X-Pol or Co-Pol (2-Port Models).

Off-the-shelf and customized models are available and can be supplied with standard feed horns. Diplexers can be designed with higher power handling using adequate heat dissipation and can be finished to meet your needs.


114450-07 2-Port 7.25 - 7.75 7.90 - 8.40 
114495-01 7.208 - 7.225 8.100 - 8.350

 

 

 

X-Band High isolation - Diplexer

X-Band High isolation - Diplexer

$CALL

Description: One of our most popular product, our diplexers are known to have high isolation and low insertion losses. Low VSWR and group delay, these components are available for various frequencies and polarization- linear or CP; X-Pol or Co-Pol (2-Port Models).

Off-the-shelf and customized models are available and can be supplied with standard feed horns. Diplexers can be designed with higher power handling using adequate heat dissipation and can be finished to meet your needs.

113735-09 4-Port 7.25 - 7.75 7.90 - 8.40 CP 
113735-10 4-Port 7.25 - 7.75 7.90 - 8.40 CP

 

 

Tunable Diplexer

Tunable Diplexer

$CALL

Description: Tunable Diplexers consist of two tunable Band pass Filters sharing a common port. Signals applied to the common port are separated in accordance with the pass band frequency of each filter network Signals applied to either channel are isolated from the adjacent channel, but are combined at the common port. Circulator designs, to enhance isolation, and non-circulator designs for non-directional applications and to minimize loss.

TNDPPKW Data Sheet

 

 

 

 

Fixed Diplexers

Fixed Diplexers

$CALL

Description: We offer a wide array of passive High Power RF components in S, C, and X Bands. All can be tailored to you precise performance specifications. The components are available individually, or can be provided as an integrated, optimized assembly to connect you transmitter, receiver and antenna.

FDPL6KW Data Sheet

 

 

 

Triplexer

 

Triplexer

$CALL

Description: Triplexers are available in both coax and waveguide types. As they are non-directional, they can serve to combine or split signals for transmit or receive applications or a combination of both. Bandwidths, Channel to Channel Isolation, Loss, Power Handling, and Mechanical Configuration are all designed to your specific application. combines the output of three transmitters (X-Band, Ku Low and Ku High) to a common antenna. Each channel is 500 MHz wide. Isolation between channels exceeds 90 dB. Insertion Loss ranges from 0.8 to 1.2 dB per channel. Power Handling is 30 Megawatts, peak; 18 Kilowatts average. Connections are CPR 650 Waveguide Flanges The unit requires pressurization with SF6.

FTRIPLEX2P Data Sheet

 

 

 

Quadriplexer

Quadriplexer

$CALL

Description: Quadriplexer combines the output of four transmitters (2 in X-Band and 2 in Ku Band) to a common antenna. Channel bandwidths range from 200 MHz to 530 MHz. Isolation between channels exceeds 90 dB. Insertion Loss ranges from 0.8 to 1.2 dB per channel. Integral harmonic suppression filters and power monitoring couplers are included. Interface connections to coax and/or waveguide are available. The package is extremely compact, low profile, light weight and rugged.

QUADRIPLEXER Data Sheet

 

Flange-Wikipedia

Flanges for waveguide are readily available and precisely fabricated from Brass, Copper or Aluminum material in a range of plain, choke and double-ridged - plane cover type or choke - type, and Pressurizable or unpressurizable as per the customer's requirement. Flange sizes are available from WG10 to to WG22 (WR284 to WR28) WR10 through WR650 including UBR, CAR, PBR, UAR, CBR, and PAR, and Special Flanges. American styles are also available, such as UG, CMR, CPR Flat, CPR Grooved, Cover, Choke, PDR, UDR.while couplings are available from WG8 (WR430) and custom designs. General Machining - CPR, O-Ring and Flat Style Gaskets - Quick Disconnect Assembly.


 

Double Ridged Flange WR75

Double Ridged Flange WR75

$69.00

Description: Fabricated from Brass, Copper or Aluminum material in a range of plain, choke and double-ridged - plane cover type or choke - type, and pressurizable or unpressurizable as per the customer's requirement. Flange sizes are available from WG10 to to WG22  (WR284 to WR28)  while couplings are available from WG8 (WR430) and custom designs.

DRFWR75 Data Sheet

 

 


 

 

Plane Flange WR137

Plane Flange WR137

$45.00

Description: Flange sizes are available from WG10 to to WG22 (WR284 to WR28) while couplings are available from WG8 (WR430) and custom designs. Fabricated from Brass, Copper or Aluminum material in a range of plain, choke and double-ridged - plane cover type or choke - type, and Pressurizable or unpressurizable as per the customer's requirement. 

FWR137 Data Sheet

 

 

 

Quick-Disconnect Waveguide Flange

Quick-Disconnect Waveguide Flange

$459.00

Description: Quick Disconnect Assembly All quick disconnect assemblies come standard with male/female connections. 1.70 - 40.00.00 GHz Performance Frequency. 1.05 Typical Max VSWR (VSWR varies with design) All QD assemblies include dust caps, clamps, and lanyards. Aluminum (6061) or copper (OFHC) material available. Numerous Flange Configurations available. Standard finish is corrosion treatment & painted flat black.

Quick Disconnect Data Sheet

 

 

 

potentiometer

Parts & Accessories

$CALL

Description: High reflection short circuits. Waveguide offset shorts are available with a standard 1/8, 1/4, and 3/8 shorting distance, designed close to the center frequency of each waveguide size.

 

 

See: Feedhorn Parts

 

 

 

Pressure Window - Diclad

Pressure Window - Diclad

$149.00

Description: PRESSURE WINDOWS - Pressure windows capable to withstand the requested pressurization level without degradation of RF performance. Standard windows are made with Kapton, or Diclad. Alternative solutions can be analyzed in order to be suitable to customer’s application.

DI-PW-WR137 Data Sheet

 

 

 

Pressure Window - Kapton

Pressure Window - Kapton

$199.00

Description: Waveguide Pressure Window- WR75 - Pressure Window for WR75, 5.85–8.2 GHz, mates to WR75. Other  CPR137. CPR112G - CPR187G - PBR100 - WR90 - WR187 Pressure windows capable to withstand the requested pressurization level without degradation of RF performance.

PWKAPTON Data Sheet

C-band waveguide feed

Flange WR-75

$45.00

Description: 3.5 - 40.00 GHz 1.15 Typical Max VSWR (VSWR varies with design) Numerous Flange Configurations available Aluminum (6061) Waveguide Available.

See: Feedhorn Parts

 

 

Flange WR-159

Flange WR-159

$105.00

Description: 3.5 - 40.00 GHz 1.15 Typical Max VSWR (VSWR varies with design) Numerous Flange Configurations available Aluminum (6061) Waveguide Available.

See: Feedhorn's

 

 

 

 

X-band, S-band, Ka-band, L-band, Ku-band, C-Band. N type F type

Parts & Accessories

$CALL

Description: C-Band - C-Pol Ka-Band K-Band Ku-Band X-Band - X-Pol X-Ku-Band Transmit Frequency  5.700 - 6.725 GHz 5.700 - 6.750 GHz 5.700 - 7.025 GHz 5.725 - 7.100 GHz 5.725 - 6.725 GHz 5.850 - 6.425 GHz 5.850 - 6.500 GHz 5.850 - 6.555 GHz 5.850 - 6.725 GHz 5.850 - 7.025 GHz 5.925 - 7.025 GHz6.300 - 6.800 GHz 6.700 - 7.025 GHz 6.725 - 7.025 GHz 13.75 - 14.50 GHz Multi flange configurations available.

 

 

Ku-band waveguide feed

Parts & Accessories

$CALL

Description: Polarization - L-Pol, Co-Pol, C-Pol and CR / CL-Pol - Single Port, 2-Port, 3-Port, 4-Port. Input Frequency 3.390 - 4.210 GHz 3.400 - 4.200 GHz 3.400 - 4.800 GHz 3.625 - 4.220 GHz 3.625 - 4.200 GHz 4.450 - 4.800 GHz 4.500 - 4.825 GHz4.500 - 4.800 GHz 10.95 - 12.75 GHz Waveguides available. Potentiometer

See: Tx/Rx Transmit Receive See: Satellite / Parabolic

See: Custom Built

See: LNB's

See: Medium Dish See: Mounts & Hardware

 

Antenna Feed Requirements Checklist Form

 

WR28 (R-Band) 26.5 to 40.0 GHz - WR42 (K-Band) 18.0 to 26.5 GHz - WR51 (N-Band) 15.0 to 22.0 GHz - WR62 (P-Band) 12.0 to 18.0 GHz - WR75 (Ku-Band) 10.0 to 15.0 GHz - WR90 (X-Band) 8.2 to 12.4 GHz - WR112 (H-Band) 7.05 to 10.0 GHz - WR137 (J-Band) 5.85 to 8.20 GHz - WR187 (G-Band) 3.95 to 5.85 GHz - WR284 (S-Band) 2.60 to 3.95 GHz - standard components, and customized solutions for a variety of industrial applications utilizing continuous-wave (CW and pulsed) microwave technology. Waveguide Antennas-Wikipedia There are several types of microwave antennas like standard Gain, Pyramidial horn, Pick up horn, Dielectric antenna, Parabolic dish antenna etc. these are used to radiate microwave energy in the air and to receive the energy from air-Wikipedia

Frequency Meters - Micrometer Type - Absorption type (except in SBand) cavity Wave-meter called Frequency Meter. These are made of tunable resonant cavity (having high Q) of particular size. Slotted-Section-Wikipedia With Probe-Carriage - Monitor wave-patterns inside the waveguide system-Wikipedia Tunable Probe - Meant for exploring the energy of the electric field in a suitably fabricated section of waveguide. Broad-Band Tuned Probe (Fixed). Klystron Mounts - Waveguide flanged on one end and terminated with a movable short on the other end. Orthogonality-Wikipedia  An octal base with cable is provided for connecting these mounts to klystron power supply. Ferrite-Wikipedia  isolators - Isolators consist of Three port Circulator with one port terminated by Matched Load (Termination), thus making it a two port device. Also offer Three Port Ferrite Circulator. Slide Screw Tuners and Precision Slide Screw Tuners - Slide Screw Tuners are used for matching purpose by penetration and position of a screw in the slot, provided in the center of the waveguide- section. Gunn Oscillators-Wikipedia Liquid Dielectric Cells - Solid Dielectric Cell - Pin Modulators - These consists of a Pin-diode mounted inside a section of waveguide flanged on it's both end. A fixed attenuation vane is mounted inside at the input port to protect the oscillator-Wikipedia The RF chain is completely configured to your requirements. S-Band - C-Band - X-Band - Ku-Band - Ka-Band - W-Band - Q-Band - V-Band - DBS-Band - Tri-Band - S-Band - UHF-Band - L-Band. WE CROSS REFERENCE / ALTERNATES - We can also assist by cross referencing when you are looking for products by the following companies: AEP - AEROFLEX – AMPHENOL RF - ASTROLAB – BIRD Electronic, CARLISLE Interconnect – CDI Connecting Devices - CINCH Connectivity – COAXICOM – CONCORD - CONNEX – CORNING/GILBERT - DELTA Electronics - EF JOHNSON Components – EMERSON - FAIRVIEW Microwave – HUBER SUHNER – INMET - ITT/SEALECTRO – KINGS Electronics – M/A-COM – MICROLAB/FXR - MIDISCO – MIDWEST Microwave - MINI CIRCUITS – MOLEX – MURATA - NARDA Microwave - NEXTEK Lighning Protectors – OMNI-SPECTRA – PASTERNACK – POMONA Electronics - RADIALL – ROSENBERGER – SANTRON - SOLITRON – SV Microwave – SOUTHWEST MICROWAVE, TE Connectivity - TELEGARTNER – TENSOLITE – TIMES Microwave - TROMPETER, TRU – TYCO – WINCHESTER Electronics, XMA Corp, and others

 

 A waveguide is a structure that guides waves, such as electromagnetic waves or sound, with minimal loss of energy by restricting expansion to one dimension or two.

 

 standard components, and customized solutions for a variety of industrial applications utilizing continuous-wave (CW and pulsed) microwave technology
 HOME About Satellite | Government | Custom Built | RX/TX | About Us | Contact Us                          Call Today:  (954) 941-8883 
Copyright © 1995-2016 SatelliteDish.com All Rights Reserved.